OKI C8800dn User Manual

							
C8800 User’s Guide241
Blue Tone
Converts the document to shades of blue.
       C32_Mac_10.3_11c.jpg    
Gray Tone
Converts the document to shades of gray.
        C32_Mac_10.3_11d.jpg    
Lightness Decrease ( A) / Lightness Increase ( B)
Darkens or lightens the document. The middle picture below is 
with no filters applied.
   C32_Mac_10.3_11e.jpg,  C32_Mac_10.3_11a.jpg, 
C32_Mac_10.3_11f.jpg 
           
Downloaded From ManualsPrinter.com Manuals 
						

							
C8800 User’s Guide242
Reduce File Size
This filters the document to reduce its file size.
Sepia Tone
Converts the document to shades of brown.
    C32_Mac_10.3_11g.jpg      
Downloaded From ManualsPrinter.com Manuals 
						

							
C8800 User’s Guide243
Add Filters
Clicking this brings up a Preview screen.  
Here you can see the effect produced by selecting any of the 
standard filters.
To do this, click the name in the Filters box.  Then, click Apply.
You can also
•add New filters of your choice
• Delete filters you have added to the list
• set color conversion options  such as Rendering Intent 
(Automatic, Perceptual, Relative, Saturation, Absolute), 
etc.
     C32_Mac_10.3_11.jpg        
Downloaded From ManualsPrinter.com Manuals 
						

							
C8800 User’s Guide244
Color Separation
The color separation feature prints  each of four primary colors 
as separate greyscale images. This is a proofing facility that 
indicates the relative densities of  each of the four toner colors 
in your print document. The dark er an area appears, the more 
of the corresponding toner color will be used when printing in 
full color.
Windows PostScript
1. In the driver’s [color] tab, click [Advanced].
2. Select which [separations] you want to print from the 
drop-down list.
Mac OS9
1.Choose [File]  → [Print].
2. From the printer menu, select your printer model.
3. Select [color Options].
4. From the [Separations] menu, select the separations you 
wish to print.
Mac OS X
5.Choose [File]  → [Print].
6. From the printer menu, select your printer model.
7. Select [Printer Features].
8. From the [Feature Sets] menu, select [color Options]
9. From the [Separations] menu, select the separations you 
wish to print.
Downloaded From ManualsPrinter.com Manuals 
						

							
C8800 User’s Guide245
Cover Page
Separating queued print jobs
When you share a printer with other users it can be useful to 
print a special page between print jobs to help locate each 
user’s job in a paper stack at the printer. In Windows this page 
is called a “separator page”. On  the Mac it is called a “cover 
page”.  
NOTE:   Do not confuse Cover Page  with “Cover Print”. Cover 
Print is when the first page (cover ) of a print job is fed from one 
paper tray, and the remaining pa ges of the print job are fed 
from a different tray.  See “Cover Print” on page 246 .  
Windows
The separator page is set from the printer driver’s default 
properties window. Access to this is directly from Windows, not 
from within your application program.   
1. In the driver’s Advanced tab click the [Separator Page…] 
button.
2. Click [Browse] and navigate to a file containing an image 
of the separator page you wish to use, then click [OK].
Mac OS 9
The cover page is accessed from your application’s print 
dialogue.
1. Choose [File]  → [Print].
2. From the [Printer] menu, select your printer model.
3. Select [Cover Page].
4. Select the required options for the cover page.
Mac OS X cover page
The cover page is accessed from your application’s print 
dialogue.
5. Choose [File]  → [Print].
6. From the [Printer] menu, select your printer model.
7. Select [Cover Page].
8. Select the required options for the cover page.
Downloaded From ManualsPrinter.com Manuals 
						

							
C8800 User’s Guide246
Cover Print ____________________________
Cover print is when the first page  (cover) of a print job is fed 
from one paper tray, and the remaining pages of the print job 
are fed from another paper tray.  
This feature is not available in the Windows PostScript Drivers.
Do not confuse Cover Print with “Cover Page”. 
A Cover Page is an identificati on sheet inserted between the 
print jobs of a network printer.  See “Cover Page” on page  245.
WINDOWS PCL
1.In the Setup tab, choose any saved driver settings you 
wish to use.    
2. Click [Paper Feed Options].  
3. Check the [Use different source for first page] checkbox.
4. Choose the tray you want to feed the cover page from 
and the paper type in the [Source] and [Weight] drop-
down lists.
MAC OS9.X
1.Choose [File]  → [Print].  
2. From the [Printer] menu, select your printer model.
3. Select [General].
4. From [Paper Source], select the trays or paper types you 
wish to use for the first page and remaining pages.
MAC OS X
1.Choose [File]  → [Print].  
2. From the [Printer] menu, select your printer model.
3. Select [Paper Feed].
4. Select the trays or paper types you wish to use for the 
first page and remaining pages.
Downloaded From ManualsPrinter.com Manuals 
						

							
C8800 User’s Guide247
Custom Page Sizes ______________________
General Information
Custom Page Size allows you to setup your printer (by 
customizing settings in your prin ter driver) to work with non-
standard size sheets of print media. 
You save the settings. Then, the  saved settings can be used for 
printing, the same way you use standard page sizes.
To use Custom Page Size, you must complete two steps.
1. You must set up your custom page in your printer driver.
This is also known as registering the custom page.
2. To use a registered custom page, you must select it when 
you print a document. 
For more information, Custom Size Ranges:   see page 248  
Restrictions:   see page 249  
Special Print Media:   see page 250  
Windows PostScript:   see page 251  
Windows PCL:   see page 253  
Macintosh OS 9.x:   see page 255  
Macintosh OS 10.1, 10.2, and 10.3:  This feature does not 
work with these operating systems.
Downloaded From ManualsPrinter.com Manuals 
						

							
C8800 User’s Guide248
Custom Size Ranges
Tray 1 and Tray 2  
The range varies slightly, depending on the printer driver. 
Printing may not work on papers  longer than 18 inches (457.2 
mm). 
Width:  2 to 12.9 inches [51 to 328 mm]
Length:  5 to 47.25 inches [128 to 1200 mm]
MP Tray  
The range varies slightly, depending on the printer driver. 
Printing may not work on papers  longer than 18 inches (457.2 
mm). 
Width:  2 to 12.9 inches [51 to 328 mm]
Length:  5 to 47.25 inches [128 to 1200 mm]
Banners 
from 8¼ to 8½ (210 to 215.9 mm) wide by up to 47¼ 
(1.2 m) long. Banners must be fed one sheet at a time.
Downloaded From ManualsPrinter.com Manuals 
						

							
C8800 User’s Guide249
Restrictions 
1.Custom Page Size may not work with all software 
applications.
2. Custom page sizes can only be printed from the manual 
feed (multi purpose (MP) tray).
• one-sided printing only
• rear exit only.
If the sheet of paper you are using is too long to be 
supported by the MP  tray, use your hands.
3. Custom page sizes can only be printed to the face-up exit 
(straight-through paper feed/rear exit).
4. Before using Custom Paper Size, you must change the 
printer driver setting for the multi-purpose tray Paper 
(Media) Size to Custom Paper Size. 
5. The paper size must be set to portrait (Width is less than 
Length).
6. If you use Custom Page, and are not satisfied with the 
print quality, try setting the PRINT QUALITY to Normal or 
Quick.
7. The number of custom page sizes that can be defined 
varies according to the type of the printer driver and the 
operating system.
PostScript 
XP,2000, NT:  One 
Me/98:  Three 
PCL  
XP, 2000, Me/98, NT:  up to 32 
8. Most applications allow the printer properties to be 
accessed from within the document print dialog box.
Settings in your applications  override settings in the 
printer driver.
Settings in the printer driver  override settings in the 
printer menus.
Downloaded From ManualsPrinter.com Manuals 
						

							
C8800 User’s Guide250
Special Print Media (Paper)
If you are using heavy media,  transparencies, envelopes or 
labels, use the face up (straight through) paper feed path.          
If the Ultra Heavy setting does  not give proper toner fusion, 
you can try the Label settings. See “Driver Settings” on 
page 12 .
For face up printing (straight- through path), make sure the 
rear exit is open and the paper support is extended.                
• Paper is stacked in reverse order.
• Tray capacity is about 100 sheets.
Actual capacity depends on paper weight.             
    F9_15.eps   
Downloaded From ManualsPrinter.com Manuals