OKI C530dn User Manual
Have a look at the manual OKI C530dn User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 103 Oki manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
41 – C330/C530 Menu Functions Media Menu ITEMACTIONEXPLANATION TR A Y 1 PAPER SIZEA4 /A5/ A6/ B5/ LEGAL14/ LEGAL13.5/ LEGAL13/ LETTER/ EXECUTIVE/ CUSTOM Selects the size of paper loaded in Tray 1 (upper tray if both trays installed). For CUS - TOM setting see X-DIMENSION and Y-DIMEN- SION in “Print menu” above. TR A Y 1 MEDIA TY P EPLAIN LETTER- HEAD BOND RECYCLED CARD STOCK ROUGH GLOSSY USERTYPE1 USERTYPE2 USERTYPE3 USERTYPE4 USERTYPE5 Selects the type of media loaded in this tray. This will help the printer to adjust its internal operating parameters, such as engine speed and fusing temperature, to better accommo - date the media to be fed. For example, letter- head may benefit from a slightly lower fusing temperature to ensure that its ink does not offset. Note: USERTYPEn are displayed only if regis- tered in the host PC/Server. TR A Y 1 MEDIA WEIGHTLIGHT MEDIUM LIGHT MEDIUM HEAVY ULTRA HEAVY1 Adjusts the printer for the weight of paper stock loaded in this tray. Downloaded From ManualsPrinter.com Manuals
42 – C330/C530 Menu Functions TR A Y 2 PAPER SIZEA4 /A5/ B5/ LEGAL14/ LEGAL13.5/ LEGAL13/ LETTER/ EXECUTIVE CUSTOM Selects the size of paper loaded in Tray 2 (lower) if installed. For CUSTOM setting see X-DIMENSION and Y-DIMENSION in “Print menu” above. TR A Y 2 MEDIA TY P EPLAIN LETTER- HEAD BOND RECYCLED CARD STOCK ROUGH GLOSSY USER TYPE 1 USER TYPE 2 USER TYPE 3 USER TYPE 4 USER TYPE 5 Selects the type of media loaded in this tray (if installed). This will help the printer to adjust its internal operating parameters, such as engine speed and fusing temperature, to better accommodate the media to be fed. For example, letterhead may benefit from a slightly lower fusing temperature to ensure that its ink does not offset. Note: USERTYPEn are displayed only if regis- tered in the host PC/Server. TR A Y 2 MEDIA WEIGHTLIGHT MEDIUM LIGHT MEDIUM HEAVY ULTRA HEAVY1 Adjusts the printer for the weight of paper stock loaded in this tray (if installed). ITEMACTIONEXPLANATION Downloaded From ManualsPrinter.com Manuals
43 – C330/C530 Menu Functions MPT PAPER SIZEA4 A5 A6 B5 LEGAL14 LEGAL13.5 LEGAL13 LETTER EXECUTIVE CUSTOM COM-9 ENVELOPE COM-10 ENVELOPE MONARCH ENV DL ENVE- LOPE C5 ENVE- LOPE INDEX CARD Selects the size of paper to be fed from the multi purpose tray. For CUSTOM setting see X-DIMENSION and Y-DIMENSION in “Print menu” above. ITEMACTIONEXPLANATION Downloaded From ManualsPrinter.com Manuals
44 – C330/C530 Menu Functions MPT MEDIA TY P EPLAIN LETTER- HEAD LABELS BOND RECYCLED CARD STOCK ROUGH GLOSSY USER TYPE 1 USER TYPE 2 USER TYPE 3 USER TYPE 4 USER TYPE 5 Selects the type of media to be fed from the multi purpose tray so that the printer can adjust its internal parameters to better accommodate the selected type of media. Note: USERTYPEn are displayed only if regis- tered in the host PC/Server. MPT MEDIA WEIGHTLIGHT MEDIUM LIGHT MEDIUM HEAVY ULTRA HEAVY1 ULTRA HEAVY2 Selects the media weight to be fed from the multi purpose tray. UNIT OF MEASUREMillimeter Inch Selects the unit of measure. ITEMACTIONEXPLANATION Downloaded From ManualsPrinter.com Manuals
45 – C330/C530 Menu Functions Color Menu ITEMACTIONEXPLANATION DENSITY CONTROLAUTO MANUALIf set to AUTO, image density will be auto- matically adjusted at power on, when a new image drum or toner cartridge is installed, and at intervals of 100, 300 and 500 drum counts. If a 500 drum count interval occurs during a print job it will occur at the end of that job, and will take up to 55 seconds. If set to manual, this adjustment will only be performed when initiated by the next menu item. ADJUST DENSITYEXECUTESelecting this will activate adjustment of the color density. COLOR TUNINGPRINT PATTERNSelecting this item prints the color tuning pattern to help you adjust the color balance. C HIGHLIGHT C MID-TONE C DARK M HIGHLIGHT M MID-TONE M DARK Y HIGHLIGHT Y MID-TONE Y DARK K HIGHLIGHT K MID-TONE K DARK-3~0~+3 -3~0~+3 -3~0~+3 -3~0~+3 -3~0~+3 -3~0~+3 -3~0~+3 -3~0~+3 -3~0~+3 -3~0~+3 -3~0~+3 -3~0~+3 Adjusts image density for each color compo- nent (cyan, magenta, yellow and black). Normal setting is 0. C DARKNESS M DARKNESS Y DARKNESS K DARKNESS-3~0~+3 -3~0~+3 -3~0~+3 -3~0~+3 Adjusts darkness of each color component (cyan, magenta, yellow and black). Normal setting is 0. Downloaded From ManualsPrinter.com Manuals
46 – C330/C530 Menu Functions AJST REGISTRATIONEXECUTEPerforms automatic color registration adjustment. Normally this is done on power on and when the top cover is opened and then closed. This process accurately aligns the cyan, magenta and yellow images to the black image. C REG FINE ADJUST M REG FINE ADJUST Y REG FINE ADJUST-3~0~+3 -3~0~+3 -3~0~+3 Performs fine adjustment of image timing in relation to the black image component. INK SIMULATIONOFF SWOP EURO- SCALE JAPAN Selects from a range of industry standard color swatches. Note: This function only applies to PS mod- els. UCRLOW MEDIUM HIGH Selects limitation of the toner layer thick- ness. If paper curl occurs in dark printing, select- ing MEDIUM or LIGHT sometimes helps reduce curl. CMY100% DENSITYDISABLE ENABLE When enabled, black areas are produced using 100% C, M, and Y instead of black. This results in a glossier finish. CMYK CONVERSIONON OFF Setting to “OFF” will simplify the conversion process of CMYK data, which will reduce the processing time. This setting is ignored when Ink Simulation function is used. Note: This function only applies to PS mod- els. ITEMACTIONEXPLANATION Downloaded From ManualsPrinter.com Manuals
47 – C330/C530 Menu Functions Sys Config Menu ITEMACTIONEXPLANATION POW SAVE TIME1 MIN 2 MIN 3 MIN 4 MIN 5 MIN 10 MIN 15 MIN 30 MIN 60 MIN 120 MIN 180 MIN Adjusts the idling time before the printer automatically switches into power saving mode. In this mode power consumption is reduced to a low level required to just keep the printer operating and ready to receive data. When a job is sent the printer will require a warm-up time of up to 1 minute before printing can begin. SLEEP TIME (MODEL C530 ONLY)1 MIN 2 MIN 3 MIN 4 MIN 5 MIN 10 MIN 15 MIN 30 MIN 60 MIN 120 MIN 180 MIN Adjusts the power saving time before the printer automatically switches into sleep mode. PERSONALITYAUTO EMULATI ON PCL IBM PPR III XL EPSON FX PS3 EMULATIO N This item selects which industry standard emulation your printer should use. When set t o AU TO, inc om ing d ata i s e xam i ned and the correct emulation is automatically selected each time a print job is received. USB PROTOCOLRAW ASCII Selects PostScript data format for USB port. NET PS PROTOCOLRAW ASCII Selects PostScript data format for network port. Downloaded From ManualsPrinter.com Manuals
48 – C330/C530 Menu Functions CLRABLE WA R N I N GONLINE JOB When ONLINE, non-critical warnings, such as requests for a different paper size, can be cleared by pressing the ON LINE button. When set to JOB, they are cleared when the print job resumes. AUTO CONTINUEON OFF Determines whether or not the printer will automatically recover from a memory over - flow condition. MANUAL TIMEOUTOFF 30 SEC 60 SEC Specifies how many seconds the printer will wait for paper to be fed before cancelling the job. WA I T T I ME O U T 5 ~ 40 SEC ~300, OFF Specifies how many seconds the printer will wait when received data pauses before forc - ing a page eject. In PostScript Emulation mode the job will be cancelled if timeout occurs. LOW TONERCONTINU E STOP Specifies whether the printer should con- tinue printing even after a low toner condi- tion is detected. JAM RECOVERYON OFF Specifies whether the printer should perform jam recovery after a paper jam has occurred. If ON, the printer will attempt to re-print any pages lost due to a paper jam once the jam has been cleared. ERROR REPORTON OFF If ON, the printer will print error details when a PostScript Emulation error occurs. Note: Applies to PS & PCL XL only. ITEMACTIONEXPLANATION Downloaded From ManualsPrinter.com Manuals
49 – C330/C530 Menu Functions PCL Emulation Menu ITEMACTIONEXPLANATION FONT SOURCE RESIDENT RESIDENT 2Specifies the location of the PCL default font. Normally this will be INTERNAL unless addi - tional fonts are installed in the expansion ROM slot or additional fonts have been downloaded to RAM as permanent fonts. FONT NO. I0 ~ 190Sets the current default font number from the currently selected source. FONT PITCH 0.44 CPI ~ 10.00 CPI ~ 99.99 CPI Sets the width of the PCL default font in characters/inch (CPI). Default font is the fixed-pitch, scalable font. The value is displayed to the second decimal place Displayed only when the font selected in Font No. is fixed-spacing, scalable font. FONT HEIGHT 4.00 POINT ~ 12.00 POINT ~ 999.75 POINT Height of the PCL default font. Note: This menu item is displayed only when the font selected in Font No. is a propor - tional-spacing, scalable font. SYMBOL SETPC-8 (DEFAULT SYMBOL SET ONLY SHOWN) PCL symbol set. If the font source and num- ber are changed to one which does not sup- port the selected symbol set, this must be changed to an available symbol set for that font. A4 PRINT WIDTH78 COLUMN 80 COLUMN Sets the number of columns subject to Auto LF with A4 paper in PCL. This is the value when Auto CR/LF Mode is set to OFF with the 10CPI character. WHITE PAGE SKIPOFF ON Selects whether blank pages are printed or not. CR FUNCTIONCR CR + LF Selects whether a received carriage return character (0Dh) also causes a line feed. LF FUNCTIONLF LF+CR Selects whether a received line feed charac- ter (0Ah) also causes a carriage return. Downloaded From ManualsPrinter.com Manuals
50 – C330/C530 Menu Functions PRINT MARGINNORMAL 1/5 INCH 1/6 INCH Sets the non-printable page area. NORMAL is PCL compatible. TR U E B L A C KOFF ON Selects whether black image data is printed using black toner (ON) or 100% CMY (OFF). (Valid in PCL emulation mode only.) PEN WIDTH ADJUSTON OFF hen minimum width is specified in PCL, sometimes a 1-dot line, looks broken. With PEN WIDTH Adjust set to ON, when the minimum width is specified, the line width will be emphasized so as to look wider than a 1-dot line. With PEN WIDTH Adjust set to OFF, the line will appear as before. TR A Y I D # MP TRAY 1 ~ 4 ~ 59Sets the # to specify the MP tray for the paper feed destination command (ESC&l#H) in PCL5e emulation. TR A Y 2 1 ~ 5 ~ 59Sets the # to specify Tray 2 for the paper feed destination command (ESC&l#H) in PCL5e emulation. (Displayed only if Tray 2 is installed). ITEMACTIONEXPLANATION Downloaded From ManualsPrinter.com Manuals