Oce TCS400 User Manual

Getting started41
Turn on and off the Océ TCS400
Turn on and off the Océ TCS400
Introduction
The Océ Settings Editor application contains an important setting for the start 
up and shut down of the printer and Océ Power Logic® controller. The path of 
the setting is the following:
KO - System - Synchronize printer and Power Logic controller power 
on/off.
Depending on this setting, you can turn the Océ TCS400 printer and the Océ 
Power Logic
® controller on and off, together or separately.
You can define...

42 Océ TCS400 User manual
Turn the Océ Power Logic® controller and the printer on
Perform the following when the setting KO - System - Synchronize printer 
and Power Logic controller power on/off if the Océ Settings Editor is set to 
On:
1Press the on/off button of the printer.
The Océ Power Logic® controller and the printer both start up.[16 ] The on/o ff butto n of the  printe r
[16] The on/off button of the printer
Perform the following when the setting KO - System - Synchronize printer 
and Power...

Getting started43
Turn the Océ Power Logic® controller and the printer off
Perform the following when the setting KO - System - Synchronize printer 
and Power Logic controller power on/off if the Océ Settings Editor is set to 
On: There are two possibilities:
1Press the on/off button on the printer or
2select Shut down from the System menu in the Océ System Control Panel.
The Océ Power Logic® controller and the printer both shut down.
Perform the following when the setting KO - System - Synchronize...

44 Océ TCS400 User manual
Energy save modes
Introduction
The Océ TCS400 has two modes to prevent unnecessary power consumption.
■The energy save mode
The energy save mode functions only for the printer and Océ Power Logic® 
controller.
■The sleep mode.
The energy save mode
The system uses less energy in the energy save mode than in the normal 
operating mode. Both the printer and the Océ Power Logic® controller remain 
turned on. By default, the energy save mode is enabled in the Océ Settings 
Editor....

Getting started45
There are two ways to activate the printer from the sleep mode.
■Send a job
■Press the on/off button of the printer.
The printer needs about 1 minute to wake up from the sleep mode. The green 
LED illuminates. This indicates that the system wakes up. During the wake-up 
period the screen remains blank.
Press any key on the scanner operator panel to activate the printer from the 
sleep mode.
The scanner needs 5 minutes to warm up before you can scan a job. The 
scanner needs 60 minutes...

46 Océ TCS400 User manual
Prepare the Océ TCS400 for use
Change the display language of the Océ TCS400
Introduction
You can change the display language for the following components:
■The controller applications
■The printer operator panel
■The scanner operator panel.
Change the language of the controller applications
You can change the display language of the controller applications (Océ 
Settings Editor, Océ System Control Panel, Océ Queue Manager). You can 
choose from 18 available languages. (see...

Getting started47
How to change the language of the controller applications
1
Open the View menu.
2Select Language.
If you connect to the controller from Océ Remote Logic®, all languages are 
available. If you use the controller applications local on the controller, only the 
first language and the second language defined in the Océ Settings Editor are 
available.
3Select one of the languages.
The screen language of the application changes to the selected language.
Note:If you connect to the controller...

48 Océ TCS400 User manual
How to change the language on the scanner operator panel
1
On the home screen, press the upper right softkey for System to enter the 
system screen.
2Press the softkey below the Language card to change the language.[19 ] The l anguag e ca rd  on the s y stem  sc reen
[19] The language card on the system screen
Note:If the first language and the second language defined in the Océ Settings 
Editor are the same, the language card is not visible.
Downloaded From ManualsPrinter.com...

Getting started49
Configure the network settings of the Océ TCS400
Introduction
The system administrator is responsible for installing and configuring the Océ 
TCS400 in the network environment. There are two ways to configure the 
network settings.
■From the printer operator panel
The off-line screen on the printer operator panel contains a wizard to 
configure the network settings.
■With the system administrator settings (SA settings) in the Océ Settings 
Editor.
The Océ Settings Editor allows you to...

50 Océ TCS400 User manual
How to configure the system from the printer operator panel 
1
Press the on-line / off-line key to set the printer off-line (see ‘The on-line mode 
and the off-line mode’ on page27).
2Use the upper softkeys to scroll to the Configure system card.
3Press the softkey below the Configure system card to enter the wizard.
The screen displays the message Use this wizard to configure the system.
4Press the key for Next.
The screen displays the message Select item.
5Use the lower...