Oce TCS400 User Manual

Get to know the Océ TCS400 21
[5]  The  printe r op erator panel
[5] The printer operator panel
[6]  The  carria ge wit h the pri nthead s
[6] The carriage with the printheads
Downloaded From ManualsPrinter.com Manuals 

22 Océ TCS400 User manual
[7]  Th e in k tan ks
[7] The ink tanks
[8]  Th e mai ntena nce  cas se tte
[8] The maintenance cassette
Downloaded From ManualsPrinter.com Manuals 

Get to know the Océ TCS400 23
[9]  The  medi a roll s
[9] The media rolls
[10 ] Th e in tegrated O c é Powe r L ogic ® c ontrol ler c abin et
[10] The integrated Océ Power Logic® controller cabinet
Downloaded From ManualsPrinter.com Manuals 

24 Océ TCS400 User manual
The printer operator panel
Introduction
This section describes the parts and the functions of the printer operator panel. 
You can turn the printer operator panel for easy vision from both sides of the 
printer.
Use the printer operator panel to view system information on the on-line screen 
and to do actions on the off-line screen.
The main components of the printer operator panel include the following:
Downloaded From ManualsPrinter.com Manuals 

Get to know the Océ TCS400 25
[11 ] Th e mai n c ompon ents  of the  pri nter ope rat or  panel
[11] The main components of the printer operator panel
1The upper softkeys
2The red attention LEDs
3The screen
4The on-line / off-line key with green LED
5The stop key
6The lower softkeys.
The screen
The screen of the printer operator panel displays different types of information. 
The type of information depends on the mode of the system.
When the printer is in the on-line mode, the screen displays general...

26 Océ TCS400 User manual
The keys
The printer operator panel includes the following keys:
■An on-line / off-line key
■A stop key
■Two upper softkeys
■Two lower softkeys.
■On-line / off-line key
Use the on-line / off-line key to switch between the on-line mode and the 
off-line mode on the screen. If you press the on-line / off-line key while the 
printer is active, the printer finishes the print. The printer then goes off-line. 
The next section contains more information about the on-line mode and the...

Get to know the Océ TCS400 27
The on-line mode and the off-line mode
Introduction
Use the on-line / off-line key to switch between the on-line mode and the 
off-line mode on the screen of the printer operator panel. If you press the 
on-line / off-line key while the printer is active, the printer finishes the print. 
The printer then goes off-line.
Downloaded From ManualsPrinter.com Manuals 

28 Océ TCS400 User manual
The on-line mode
When the printer is in the on-line mode, the green LED is on. The screen of the 
printer operator panel displays the following five information cards.
[1]  On-line  mode - Information cards
[1] On-line mode - Information cards
Information card Displayed information
Job information
■Job status
■Job name
■Progress indication
■Selected print mode.
Media information The media types loaded on the system .
Ink level information The ink level of each ink tank. There...

Get to know the Océ TCS400 29
Use the upper softkeys to scroll through the information tabs. The screen for 
each information card can contain the following parts:
[2]  The  parts  of th e on-li ne s creen
[2] The parts of the on-line screen
Note:The information on the on-line screen is also available in the Océ System 
Control Panel.
The off-line mode
Press the on-line / off-line key to enter the off-line mode. When the printer is 
in the off-line mode, the green LED is off. The printer operator panel...

30 Océ TCS400 User manual
Use the upper softkeys to scroll through the wizard cards. You can select the 
following wizards:
1Feed & cut(see ‘Cut the output and clean cut a roll of media’ on page161)
2Change media type(see ‘Change the type of media defined on the printer’ on 
page164)
3Optimize print quality(see ‘Use the Optimize print quality wizard’ on 
page141)
4Replace printhead(see ‘Replace a defective printhead’ on page186)
5Replace cassette(see ‘Replace the maintenance cassette’ on page192)...