Nortel Bcm 2 5 Telephone Features Instructions Manual

Figures11
Telephone Features Programming Guide
Figures
Figure 1 T7100, T7208, T7316, M7324 and M7324N telephones  . . . . . . . . . . . . . 20
Figure 2 Installing a T7316 telephone (North America)  . . . . . . . . . . . . . . . . . . . . . 21
Figure 3 Mounting a T7316 telephone with a stand on the wall    . . . . . . . . . . . . . . 22
Figure 4 Mounting a T7316 telephone without a stand on the wall   . . . . . . . . . . . . 23
Figure 5 Display buttons    . . . . . . . . . . . . . . . . . . . . . . . . ....

12Figures
P0937240 02 

Tables13
Telephone Features Programming Guide
Ta b l e s
Table 1 Telephone buttons   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  25
Table 2 Telephone button functions   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
Table 3 Substitutes for buttons on a one-line display telephone  . . . . . . . . . . . . . . 26
Table 4 Language options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 83
Table 5 T7316...

14Tables
P0937240 02 

15
Telephone Features Programming Guide
Preface
This guide provides information about how to program a Business Communications Manager 
telephone. This information includes items such as programming personal speed dials, transferring 
a call, and using special features. Some of the features included in the Business Communications 
Manager telephone system are:
• conference calls
 group listening
 group pickup
 directed pickup
 call tracking
This guide is aimed at the day-to-day operators of the...

16Preface
P0937240 02
Acronyms
This guide uses the following acronyms:

	

Indicates what appears on the telephone display.
Example: 

. 
italic textIndicates new terms and book titles. 
Example: Business Communications Manager Telephone 
Fe a t u re  C a rd.
Forward slash / Separates names where two actions are assigned to one button.
Example: 
Run/Stop.
AL Alarm
ASM Analog Station Module
ATA Analog Terminal Adapter
BLF Busy Lamp Field
BRI Basic Rate Interface
CAP Central Answering...

Preface17
Telephone Features Programming Guide
Related publications
For more information about using Business Communications Manager 2.5, refer to the following 
publications:
• Business Communications Manager Installation and Maintenance Guide
 Business Communications Manager Programming Operations Guide.
This document provides more information about using Unified Manager.
 Business Communications Manager DECT Installation and Maintenance Guide RC Room Condition
RJXX Registered Jack XX (Where XX is...

18Preface
P0937240 02 

19
Telephone Features Programming Guide
Chapter 1
Introduction
Your Business Communications Manager telephone system has many features that you can 
customize to keep up with changes in your workplace.
Unified Manager
Unified Manager is the tool used to program settings for the system telephony features, and 
settings for each telephone and external lines. Multiple levels of programming are accessible 
through Unified Manager. You access the Business Communications Manager Unified Manager 
from your web...

20Chapter 1 Introduction
P0937240 02 Figure 1   T7100, T7208, T7316, M7324 and M7324N telephones
Telephone installation
If you are connecting a Business Communications Manager telephone for the first time, refer to the 
following illustrations and steps.
1Disconnect the line cord from the wall socket before trying to carry out any work on the 
telephone.
2To remove any of the cords, press the release latch on the plug and carefully pull the plug from 
the socket.
3
1
2
45
6
7
3
1
2
4
56
7
1
2
4
56
71
2...