Nokia 6800 User Guide
Have a look at the manual Nokia 6800 User Guide online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 96 Nokia manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
Copyright 2003 Nokia. All rights reserved.91 Recent calls listsPress Menu and select Call register and then select Missed calls to view the list of the last ten phone numbers from which somebody has tried to call you (network service). The number in front of the (name or) phone number indicates the amount of call attempts from that caller. Tip: When a note about missed calls is displayed, press List to access the list of phone numbers. Scroll to the number you would like to call back and press . Received calls to view the list of the last ten phone numbers from which you have most recently accepted calls (network service). Dialled numbers to view the list of the last 20 phone numbers that you have most recently called or attempted to call. See also Last number redialling on page 38. Delete recent call lists to delete the recent calls lists. Select whether you want to delete all the phone numbers in the recent calls lists, or only the numbers in the missed calls, received calls or dialled numbers lists. You cannot undo the operation.Call counters and call timers Note: The actual invoice for calls and services from your service provider may vary, depending upon network features, rounding-off for billing, taxes and so forth.
Copyright 2003 Nokia. All rights reserved.92 Press Menu and select Call register and then select Call duration. Scroll to view the approximate duration of your incoming and outgoing calls in hours, minutes and seconds. The security code is required to clear the timers. Each phone line has its own call timers and the timers of the selected line are displayed. See Line for outgoing calls on page 97. Call costs (network service). Select Last call units or All calls’ units to check the cost of your most recent call or all calls in terms of units specified within the Show costs in function. Select Call cost settings and select Clear counters to clear the counters, or select Show costs in to set the phone to show the remaining talk time in terms of charging units or units of currency. Contact your service provider for charging unit prices. Select Call cost limit to limit the cost of your calls to a certain amount of charging units or units of currency. The PIN2 code is required for the call cost settings. Note: When no more charging units or currency units are left, calls may only be possible to the emergency number programmed into your phone (e.g. 112 or other official emergency number). GPRS data counter. Scroll to check the size of data that were sent or received in bytes, sent and received data in total, and to clear the counters. The security code is required to clear the counters.
Copyright 2003 Nokia. All rights reserved.93 GPRS connection timer. Scroll to check the duration of the last GPRS connection or the total GPRS connection time. You can also clear the timers. The security code is required to clear the timers.Profiles (Menu 3)Your phone has a group of profiles that allow you to personalise the tone settings of your phone and to activate a profile for different events and environments. Available profiles are General, Silent, Meeting, Outdoor, and Pager. Press Menu and select Profiles. Scroll to a profile and press Select. To activate the selected profile, select Activate. To set the profile to be active for a certain amount of time up to 24 hours, select Timed and set the end time. When the time set for the profile expires, the previous profile that was not timed becomes active. To personalise the profile, select Personalise. Select the setting that you want to change and make the changes. The settings can also be changed in the Tone settings menu, see Tone settings on page 102. In addition you can rename a profile using a Profile name. The General profile cannot be renamed.
Copyright 2003 Nokia. All rights reserved.94 Tip: To quickly change the profile in standby mode when the flip is closed, press the power key , scroll to the profile that you want to activate and press Select. when the flip is open, press the profile key , scroll to the profile that you want to activate and press Select. Settings (Menu 4)Time and date settingsClockPress Menu and select Settings, Time and date settings and Clock. Select Show clock (or Hide clock ) to show (or hide) the time on the top right of the display in standby mode. Select Set the time to adjust the clock to the correct time, and Time format to select 12-hour or 24-hour time format. The clock is also used for the functions Messages, Call register, Alarm clock, timed Profiles, Calendar, screen saver and Notes, for example. If the battery is removed from the phone for a long time, you may need to reset the time.
Copyright 2003 Nokia. All rights reserved.95 DatePress Menu and select Settings, Time and date settings and Date. Select Show date (or Hide date) to show (or hide) the date on the display in standby mode. Select Set the date to adjust the date. You can also select the date format.Auto update of date and timePress Menu and select Settings, Time and date settings and Auto-update of date & time (network service). To set the phone to automatically update the time and date according to the current time zone, select On. To set the phone to ask for a confirmation before the update, select Confirm first. The automatic update of date and time does not change the time you have set for the alarm clock, calendar or the alarm notes. They are in local time. Updating may cause some alarms that you have set to expire.Call settingsCall divertPress Menu and select Settings, Call settings and Call divert (network service). With call divert, you can direct your incoming calls to another number, for example, to your voice mailbox number. For details, contact your service provider. Divert options that are not supported by your SIM card or your network operator may not be shown. Select the divert option that you require, such as Divert if busy to divert the voice calls when your number is busy or when you reject an incoming call.
Copyright 2003 Nokia. All rights reserved.96 To set the divert setting to on, select Activate and then select the timeout after which the call is diverted, if this is available for the call divert option. To set the call divert to off, select Cancel. To check whether the call divert is activated or not, select Check status if this is available for the divert option. Several divert options may be active at the same time. To see the divert indicators in standby mode, see Essential indicators in standby mode on page 24.Anykey answerPress Menu and select Settings, Call settings and then Anykey answer. Select On and you can answer an incoming call by briefly pressing any key, except , selection keys and , and .Automatic redialPress Menu and select Settings, Call settings and Automatic redial. Select On and your phone will make a maximum of ten attempts to connect the call after an unsuccessful call attempt.Speed diallingPress Menu, select Settings, Call settings and Speed dialling. Select On and the names and phone numbers assigned to the speed dialling keys, from to with the flip closed, or the corresponding number keys of the keyboard, can be dialled by pressing and holding the corresponding number key.
Copyright 2003 Nokia. All rights reserved.97 Call waiting Press Menu and select Settings, Call settings and Call waiting. Select Activate and the network will notify you of an incoming call while you have a call in progress (network service). See Call waiting on page 41.Summary after callPress Menu and select Settings, Call settings and Summary after call. Select On and after each call the phone will briefly display the duration and cost (network service) of the call.Send my caller identityPress Menu and select Settings, Call settings and Send my caller identity. Select Yes and your phone number will be displayed to the person you are calling (network service). Select Set by network and the setting agreed upon with your service provider is used.Line for outgoing callsLine for outgoing calls is a network service to select the phone line 1 or 2, that is the subscriber number, for making calls. Press Menu and select Settings, Call settings and Line for outgoing calls. If you select Line 2 and have not subscribed to this network service, you will not be able to make calls. However, calls on both lines can be answered regardless of the selected line. If supported by your SIM card, you can prevent the line selection by selecting the Lock option.
Copyright 2003 Nokia. All rights reserved.98 For more information on availability, contact your network operator or service provider. Tip: In standby mode, you can switch from one line to the other by pressing and holding .Phone settingsLanguagePress Menu and select Settings, Phone settings and Language. Select the language for the display texts. If Automatic is selected, the phone selects the language according to the information on the SIM card.Memory statusPress Menu, and select Settings, Phone settings and Memory status. Scroll to view the amount of free memory, the total used memory and the used memory for each function. You may also find the memory information in the menu of some functions, for example in the Gallery menu.Security keyguardWhen the keypad is locked, appears on top of the display. When you have set the security keyguard setting to On and activated it, the keypad lock remains active if you open the flip. Note that if you have activated the security keyguard, it does not protect your phone data from PC Suite access. 1. Press Menu and select Settings, Phone settings and Security keyguard.
Copyright 2003 Nokia. All rights reserved.99 2. Key in the security code and press OK. The security keyguard code is the same as your security code, see Security settings on page 104. 3. Select On, if you want to activate the security keyguard. To activate the security keyguard, press Menu and , when the flip is closed. To deactivate the keyguard, press Unlock and OK, if the flip is open. If the flip is closed, press Unlock and , then key in the security code. Cell info displayPress Menu and select Settings, Phone settings and Cell info display. Select On to set the phone to indicate when it is used in a cellular network based on Micro Cellular Network (MCN) technology. If the GPRS connection is set to Always online, the cell identity may not be received. In that case, set the GPRS connection to When needed, see GPRS connection on page 132.Welcome notePress Menu and select Settings, Phone settings and Welcome note. Key in the note that you would like to be shown briefly when the phone is switched on. To save the note, press Options, and select Save.Network selectionPress Menu and select Settings, Phone settings and Network selection. Select Automatic and the phone automatically selects one of the cellular networks available in your area.
Copyright 2003 Nokia. All rights reserved.100 If you select Manual, you can select a network that has a roaming agreement with your home network operator. If No access is displayed, you must select another network. The phone stays in manual mode until the automatic mode is selected or another SIM card is inserted into the phone.Confirm SIM service actionsSee SIM services (Menu 14) on page 148.Help text activationTo set the phone to show or not to show the help texts, press Menu and select Settings, Phone settings and Help text activation. See also Using the menu on page 58.Start-up toneTo set the phone to play or not to play a start-up tone when the phone is switched on, press Menu and select Settings, Phone settings and Start-up tone. Display settingsWallpaper You can set your phone to display a background image, known as wallpaper, when the phone is in standby mode. Some images are pre-saved in the Gallery menu. You can also receive images via multimedia messages, download them via the WAP service or use PC Suite from to transfer them from your PC and then save them in Gallery. Your phone supports JPEG, GIF, BMP and PNG formats.