Nitsuko Nvm-2 Installation Instructions

Table of Contents
Issue 1-047 Version 1.20 Feature Availability......................................................................................... 49
Menu Trees ......................................................................................................................... 49
Expanded Phone System Compatibility .............................................................................. 49
Changes and Additions in the System Configuration Management Program ..................... 50...

Release Notes for Software Version 1.20
Issue 1-049  
Version 1.20 Feature Availability 
  This section of the supplement describes the new and enhanced
 features available with Software Version 1.20.
Menu Trees
For your convenience, menu trees are included at the end of this
supplement in Appendix A.  The menu trees should help you when
programming and/or using the Voice Mail system.
The table below shows these menu trees and provides a page number
where you can find each menu tree.
Menu Tree Name Page...

Release Notes for Software Version 1.20
50Issue 1-0
Changes and Additions in the System Configuration Management
Program
System Options
The following descriptions are changes and additions to the System
Options portion of the System Configuration Management Program.
ä
ää ä 
Flash timer
(Deleted field)
In software version 1.20, this field has been deleted from System
Options since it is already in Global Parameters.
ä
ää ä 
Wait after last protocol digit (0-99 sec)
(Changed field)
The default value of...

Release Notes for Software Version 1.20
Issue 1-051
Changes and Additions in the System Configuration Management
Program (cont’d)
Call Processing Parameters
The following descriptions are changes and additions to the Call
Processing Parameters portion of the System Configuration
Management Program.
ä
ää ä 
ReadyToneStr dial string to wait for ready tone
(Changed field)
The name of this field was changed from DialToneStr
 to
ReadyToneStr
.
The value of this field defines what the Voice Mail should detect...

Release Notes for Software Version 1.20
52Issue 1-0
Changes and Additions in the System Configuration Management
Program (cont’d)
Call Processing Parameters (cont’d)
ä
ää ä 
ConversationLength (sec) time allowed for record
conversation function
(New field)
This field determines the length of time that a conversation is recorded.
DEFAULT:3600 (1 = 1 second; 3600 = one hour)
ENTRIES:1 through 3600
NOTES:1)
  If you set the field to 0 (zero), the Voice Mail sets it to
the default (which is 3600).  So, if...

Release Notes for Software Version 1.20
Issue 1-053
Changes and Additions in the System Configuration Management
Program (cont’d)
Changed Format for the Tone Table
The format for the Tone Table has changed in this software version.
The On/OffTime3
 column has been removed.  The following is an
example of the revised format for the Tone Table.
Tone Table for Phone System X...

Appendix A
54Issue 1-0
P/N NVM2EUM1, SEPTEMBER 1999
MAIN Menu
To call your mailbox and access the Main Menu of features:
1.Dial Voice Mail extension number____________________
or Voice Mail outside number____________________.
2.If you hear the company greeting, dial #
(or other log-on code____________________).
Otherwise, go to step 3.
3.If requested, dial your mailbox number____________________.
4.If requested, dial your security code____________________.
5.Select the desired feature from the Main Menu....

Appendix A
Issue 1-055
P/N NVM2ESAM1, SEPTEMBER 1999
An Announcement Message is recorded for an Announcement Mailbox. An
Announcement Message typically plays some type of information (movie schedule,
sales promos, insurance rates) for Auto Attendant callers. When the Announcement
finishes playing, the caller goes back to the Automated Attendant Instruction Menu. To
record an Announcement Message, you will have to enter an Announcement Mailbox
number (800 or 801). (To let a caller hear the Announcement,...

Appendix A
56Issue 1-0
P/N NVM2EDBM1, SEPTEMBER 1999
This gives the Subscriber Mailbox access to the System Administrator and/or Database
Management Menus.72
SASystemAdministrator
This deletes the Security Code of the Subscriber Mailbox.37
DSDeleteSecurity Code
This transfers a call to the Subscriber extension and releases it. If not answered, the call
is handled by the phone system, not the Voice Mail.89
UXForcedUnscreenedXfer (Transfer)
This prevents an Auto Attendant caller from reaching the...