Nitsuko Nvm-2 Installation Instructions

Release Notes for Software Version 1.08
Issue 1-027
Changes and Additions in the System Configuration Management
Program (cont’d)
System Options
The following descriptions are changes and additions to the System
Options portion of the System Configuration Management Program.
Instructions are provided for accessing the System Options.  After these
instructions, each new or changed System Option is listed and
described.  The description for the changed System Options includes
only an explanation of the...

Release Notes for Software Version 1.08
28Issue 1-0
Changes and Additions in the System Configuration Management
Program (cont’d)
System Options (cont’d)
ä
ää ä 
Lamp On string (up to 20 digits, N-none)
(Changed field)
This is the string that tells the Voice Mail how to turn on the Message
Lamp at a particular extension.
In the NVM-2e you have two more possible entries for these strings:
N - None
Use this code for those phone systems that do not require Message
Lamps.
H - Hang up
An “H” at the end of...

Release Notes for Software Version 1.08
Issue 1-029
Changes and Additions in the System Configuration Management
Program (cont’d)
System Options (cont’d)
ä
ää ä 
Lamp Off string  (up to 20 digits, N-none) (cont’d)
Every 15 minutes the Voice Mail performs a check on all
Subscriber Mailboxes to see if they have new messages.  If not, the
Voice Mail turns off the lamp.
Some phone systems do not allow for multiple lamping to occur.
An “H” in this string indicates that after checking a Subscriber
Mailbox and...

Release Notes for Software Version 1.08
30Issue 1-0
Changes and Additions in the System Configuration Management
Program (cont’d)
Channel Parameters
The following descriptions are changes and additions to the Channel
Parameters portion of the System Configuration Management Program.
Instructions are provided for accessing the Channel Parameters.  After
these instructions, each new or changed Channel Parameter is listed
and described.  The description for the changed Channel Parameter
includes only an...

Release Notes for Software Version 1.08
Issue 1-031
Changes and Additions in the System Configuration Management
Program (cont’d)
Channel Parameters (cont’d)
ä
ää ä 
DTMF detection time (10 ms) during playback - Default is 5
(New field)
The value that you enter for this parameter lets you create the proper
balance between the level of immunity to talkoff and the level of the
voice card’s DTMF tone recognition capability during playback.
Talkoff is speech that is misinterpreted as DTMF tones by the Voice...

Release Notes for Software Version 1.08
32Issue 1-0
Changes and Additions in the System Configuration Management
Program (cont’d)
Call Processing Parameters
The following descriptions are changes and additions to the Call
Processing Parameters portion of the System Configuration
Management Program.
Instructions are provided for accessing the Call Processing Parameters.
After these instructions, each new or changed Call Processing
Parameter is listed and described.  The description for the changed Call...

Release Notes for Software Version 1.08
Issue 1-033
Changes and Additions in the System Configuration Management
Program (cont’d)
Call Processing Parameters (cont’d)
To change Call Processing Parameters in the System
Configuration Management Program:
1. Connect a laptop to the Voice Mail.  For instructions, see page 9.
Start up the System Configuration Management Program.
For instructions, see page 15.
The Main Menu for your phone system will be displayed.  The
following is an example of the Main Menu:...

Release Notes for Software Version 1.08
34Issue 1-0
Changes and Additions in the System Configuration Management
Program (cont’d)
Call Processing Parameters (cont’d)
ä
ää ä 
CmdInputTimeout (sec) Time limit for dialing commands (for
call routing)
(Changed field)
This field sets the number of seconds of silence that elapse after the
Instruction Menu finishes playing before the Voice Mail performs the
Timeout function.
If you are using the FAX-detect dial string, you must increase this
value from 4 (the...

Release Notes for Software Version 1.08
Issue 1-035
Changes and Additions in the System Configuration Management
Program (cont’d)
Call Processing Parameters (cont’d)
ä
ää ä 
NoAnswerRings Number of ringback seconds before
regarding call not answered
(Changed field)
This field determines how long an Automated Attendant call should
ring at an extension before the Voice Mail retrieves the call.
If the system is set up for supervised transfers, this parameter
determines how long the call rings at any...

Release Notes for Software Version 1.08
36Issue 1-0
Changes in Drive Letters Displayed
Due to changes in the BIOS startup program, the drive letter you will
see displayed in the prompt on your screen may be one of the
following:  A, B, or C.
Actions Added to the Dial Action Table (CR,27 and HU, 48)
You can program the following actions, which have been added to the
Dial Action Table (also referred to as a Dialing Options Menu) for the
NVM-2e:
„ Message Recording2 For a Pre-Defined Subscriber Mailbox
(CR,...