Nitsuko Nvm-2 Installation Instructions

Issue 1-017
NVM-2e
Release Notes for
Version 1.08
New and Enhanced
Features 

Table of Contents
Issue 1-019 Version 1.08 Feature Availability......................................................................................... 21
Changes and Additions in the System Configuration Management Program ..................... 21
Changing Ranges of Mailboxes in the Numbering Plan ............................................... 21
Port Options for Lamping and Message Notification..................................................... 25
System Options...

Release Notes for Software Version 1.08
Issue 1-021  
 
Version 1.08 Feature Availability 
  This section of the supplement describes the new and enhanced
 features available with Software Version 1.08.
Changes and Additions in the System Configuration Management
Program
The System Configuration Management Program in the NVM-2e has
several changes and additions from the program described in the NVM-
2 documentation.  These changes and additions are described on the
following pages.
For information on...

Release Notes for Software Version 1.08
22Issue 1-0
Changes and Additions in the System Configuration Management
Program (cont’d)
Changing Ranges of Mailboxes in the Numbering Plan (cont’d)
IMPORTANT
You need to set up all your ranges before you perform any other
Voice Mail programming.  If you add a mailbox range at a later
date, you will have to re-initialize the Voice mail System.  After the
re-initialization, you must re-program the entire system, and users
must re-record their personal Mailbox...

Release Notes for Software Version 1.08
Issue 1-023
Changes and Additions in the System Configuration Management
Program (cont’d)
Changing Ranges of Mailboxes in the Numbering Plan (cont’d)
 You will see the table for setting up Mailbox Ranges.  For
example:
 Mailbox Ranges for XX
 ----------------------------------------------------------------------
  Seq.    Starting    Mailbox   Mailbox
   #      Mailbox #    Count     Type
 ----------------------------------------------------------------------
    1...

Release Notes for Software Version 1.08
24Issue 1-0
Changes and Additions in the System Configuration Management
Program (cont’d)
Changing Ranges of Mailboxes in the Numbering Plan (cont’d)
9. When finished, press Q
 and then press 
.
10. At the System Configuration Main Menu, press Q
 then 
.
11. At the DOS prompt, type VM
 and press  
to start up the
Voice Mail.
12. Logon to a System Administrator’s Mailbox, and re-initialize the
Voice Mail Database.
For instructions, see the NVM-2 Programming Guide,...

Release Notes for Software Version 1.08
Issue 1-025
Changes and Additions in the System Configuration Management
Program (cont’d)
Port Options for Lamping and Message Notification
The System Configuration Management Program provides you with the
ability to change the Voice Mail ports that allow or do not allow
Lamping callouts and Message Notification callouts.
You can enable (allow) either or both features on one, some, or all
Voice Mail ports.  The Voice Mail will then use a port you enabled to
inform...

Release Notes for Software Version 1.08
26Issue 1-0
Changes and Additions in the System Configuration Management
Program (cont’d)
Port Options for Lamping and Message Notification (cont’d)
 Port 1 Options
 Allow Lamp callouts (Y/N)
 No >:
 Allow Msg Notification callouts (Y/N)
 Yes >:
 Port 2 Options
 Allow Lamp callouts (Y/N)
 Yes >:
 Allow Msg Notification callouts (Y/N)
 Yes >:
 
 Port 3 Options
 Allow Lamp callouts (Y/N)
 No >:
 Allow Msg Notification callouts (Y/N)
 Yes >:
 
 Port 4 Options
 Allow...