Nikon D7000 User Manual

							
191
Q
Viewing Photographs on TV
The supplied EG-D2 audio video (A/V ) cable can be used to connect the camera to a 
television or video recorder for playback or recording.
 A type C mini-pin High-
D efinition  Multimedia  Interface (HDMI) cable (available separately from third-party 
suppliers) can be used to connect the  camera to high-definition video devices.
Standard Definition Devices
Before connecting the camera to a standa rd television, confirm that the camera 
video standard ( 0237) matches that used in the TV.
1Tu rn  t he  came ra o ff.
Always turn the camera off before conn ecting or disconnecting the A/V cable.
2Connect the A/V cable as shown.
3Tune the television to the video channel.
4Turn the camera on and press the K button.
During playback, image will be displaye d both in the camera monitor and on 
the television screen.
 Note that the edges of images may not be displayed.
Connect to 
video device
Connect to camera
Audio (white)
Video (yellow) 
						

							
192
Q
AVideo Mode
If no image is displayed, check that camera is correctly connected and that the option 
selected for  Video mode  (0 237) matches the video standard used in the TV.
ATelevision Playback
Use of an EH-5a AC adapter and EP-5B power connector (available separately) is 
recommended for extended playback.
ASlide Shows
The  Slide show  option in the playback menu can be used for automated playback ( 0201).
AAudio
When a movie with sound recorded in stereo using an external microphone is viewed on a 
television connected to the camera via an A/V cable, the audio output is monaural.
 HDMI 
connections support stereo output.
 Volume can be adjusted using television controls; the 
camera controls can not be used.
DClose the Connector Cover
Close the camera connector cover when the connectors are not in use.
 Foreign matter in the 
connectors can interfere with data transfer. 
						

							
193
Q
High-Definition Devices
The camera can be connected to HDMI devices using a type C mini-pin HDMI cable 
(available separately from third-party suppliers).
1Tu rn  t he  came ra o ff.
Always turn the camera off before connecting or disconnecting an HDMI cable.
2Connect the HDMI cable as shown.
3Tune the device to the HDMI channel.
4Turn the camera on and press the  K button.
During playback, images will be displa yed on the high-definition television or 
monitor screen; the camera monitor will remain off.
DClose the Connector Cover
Close the camera connector cover when the connectors are not in use.
 Foreign matter in the 
connectors can interfere with data transfer.
Connect to high-definition device  (choose cable with connector for  HDMI device) Connect to 
camera 
						

							
194
Q
❚❚HDMI Options
The  HDMI  option in the setup menu controls ou tput resolution and can be used to 
enable the camera for remote control from devices that support HDMI-CEC ( High-
D efinition  Multimedia  Interface– Consumer  Electronics  Control, a standard that 
allows HDMI devices to be used to control peripherals to which they are connected).
Output Resolution
Choose the format for images output to the HDMI device.
 
If  Auto  is selected, the camera will automatically select 
the appropriate format.
Device Control
If  On  is selected for  HDMI>Device control  in the setup 
menu when the camera is connected to a television that 
supports HDMI-CEC and both  the camera and television 
are on, the display shown at right will appear on the 
television and the television re mote can be used in place 
of the camera multi selector and  J button during full-
frame playback and slide shows.
 If  Off  is selected, the 
television remote can not be used to control the camera.
AHDMI-CEC Devices
When the camera is connected to an HDMI-CEC device,  ) will appear in the control panel 
in place of the number of exposures remaining.
ADevice Control
See the television manual for details. 
						

							
195
M
U
Menu Guide
To display the playback menu, press G and select the  D (playback menu) tab.
The playback menu contains the following options:
Choose a folder for playback ( 0163):
D The Playback Menu:  Managing Images
G button
Option0
Delete 176
Playback folder 195
Hide image 196
Display mode 197
Copy image(s) 197
Image review200
After delete 200
Rotate tall 200
Slide show 201
Print set (DPOF) 189
Option0
Playback FolderG button ➜Dplayback menu
OptionDescription
D7000 Pictures in all folders created with the D7000 will be visible during playback.
All Pictures in all folders will be visible during playback.
Current Only pictures in the current folder  will be visible during playback. 
						

							
196
U
H ide or reveal pic tures. Hidden pictures are visible only in the Hide image menu and 
can only be deleted by fo rmatting the memory card.
Follow the steps below to hide or reveal selected pictures.
1Choose  Select/set .
Highlight Select/set  and press 2.
2Select pictures.
Use the multi selector to scroll through the 
pictures on the memory card (to view the 
highlighted picture full screen, press and 
hold the  X button; to view images in other 
locations as described on page 164, hold 
D  and press  1) and press  W to select the 
current picture.
 Selected pictures are 
marked by a  R icon; to deselect a picture, 
highlight it and press  W again. Continue until all the desired pictures have 
been selected.
3Press  J.
Press  J to complete the operation. 
Hide ImageG  button ➜Dplayback menu
OptionDescription
Select/set Hide or reveal selected pictures.
Select date Selecting this option displays a list of dates. To hide all 
pictures taken on a date, highlight the date and press 
2. 
Selected dates are marked by a  L; to reveal all pictures 
taken on a selected date, highlight it and press  2. Press  J 
to complete the operation.
Deselect all? Reveal all pictures.
DProtected and Hidden Images
Revealing a protected image will also  remove protection from the image.
W button 
						

							
197
U
Choose the information available in the playback photo 
information display ( 0165).
 Press  1 or  3 to highlight an 
option, then press  2 to select the option for the photo 
information display.
 A L appears next to selected items; to 
deselect, highlight and press  2.
 To return to the playback 
menu, highlight  Done and press  J.
Copy images between memory cards.
 This option is only available when two 
memory cards are inserted in the camera.
To  c o p y  i m a g e s :
1Choose  Select source .
Highlight Select source  and press 2.
2Select the source card.
Highlight the slot containing the card from 
which images will be copied and press  J.
3Choose  Select image(s) .
Highlight Select image(s)  and press 2.
Display ModeG  button ➜Dplayback menu
Copy Image(s)G  button ➜Dplayback menu
OptionDescription
Select source Select the card from which pictures will be copied.
Select image(s) Select the pictures to be copied.
Select destination folder Select the folder to which pictures will be copied.
Copy image(s)? Copy the images. 
						

							
198
U
4Select the source folder.
Highlight the folder containing the images 
to be copied and press 2.
5Make the initial selection.
Before going on select or deselect individual 
images, you can mark all or all protected 
images in the folder fo r copying by choosing 
Select all images  or Select protected 
images .
 To mark only individually selected 
images for copying, choose  Deselect all 
before proceeding.
6Select additional images.
Highlight pictures and press  W to select or 
deselect (to view the highlighted picture full 
screen, press and hold the  X button).
 
Selected images are marked with a L. Press 
J  to proceed to Step 7 when your selection 
is complete.
7Choose  Select destination folder .
Highlight Select destination folder  and 
press  2.
W  button 
						

							
199
U
8Select a destination folder.
To enter a folder number, choose Select 
folder by number , enter the number 
( 0 203), and press  J.
 If the folder with the 
selected number does not already exist, a 
new folder will be created.
To choose from a list of existing folders, 
choose  Select folder from list , highlight a 
folder, and press  J.
9Copy the images.
Highlight  Copy image(s)?  and press J.
A confirmation dialog will be displayed; 
highlight  Ye s and press  J.
 Press  J again to 
exit when copying is complete.
DCopying Images
Images will not be copied if there is in sufficient space on the destination card.
 Be sure the 
battery is fully charged before copying movies.
If the destination folder contains an image with the 
same name as one of the images to be copied, a 
confirmation dialog will be displayed.
 Select  Replace 
existing image  to replace the image with the image to 
be copied, or select  Replace all to replace all existing 
images with the same names without further 
prompting.
 To continue without replacing the image, 
select  Skip, or select  Cancel to exit without copying 
any further images.
Protect status is copied with  the images but print marking ( 0189) is not.
 Hidden images 
can not be copied. 
						

							
200
U
Choose whether pictures are automatically displayed in the 
monitor immediately after shooting.
 If Off  is selected, pictures 
can only be displayed by pressing the  K button.
Choose the picture displayed after an image is deleted.
Choose whether to rotate “tall” (portrait-orientation) pictures 
for display during playback.
 Note that because  the camera itself 
is already in the appropriate orientation during shooting, 
images are not rotated automatically during image review.
Image ReviewG  button ➜Dplayback menu
After DeleteG  button ➜Dplayback menu
OptionDescription
S Show next Display following picture.
 If deleted picture was last frame, previous 
picture will be displayed.
T Show previous Display previous picture.
 If deleted picture was first frame, following 
picture will be displayed.
U Continue as before If user was scrolling through pictures in order recorded, following 
picture will be displayed as described for 
Show next.
 If user was 
scrolling through pictures in revers e order, previous picture will be 
displayed as described for  Show previous.
Rotate TallG button ➜Dplayback menu
OptionDescription
On “Tall” (portrait-orientation) pictures are automatically rotated for display in the 
camera monitor.
 Pictures taken with 
Off selected for  Auto image rotation  (0 239) 
will be displayed in “wide” (landscape) orientation.
Off “Tall” (portrait-orientation) pictures are displayed in “wide” (landscape) orientation.