Nikon Camera D5200 Reference Manual

							
124
Calendar Playback
To view images taken on a selected date, press the W (Q ) button when 72 images are 
displayed.
The operations can be performed depend on whether the cursor is in the date list or 
the thumbnail list:
Full-frame  playback Thumbnail playback
Calendar 
playback
ToUseDescription
Toggle between date 
list and thumbnail list
W  (Q )Press  W (Q ) button in date list to place cursor in 
thumbnail list.
 Press again to return to date list.
Exit to thumbnail 
playback/Zoom in on  highlighted photo
X
• Date list : Exit to 72-frame playback.
• Thumbnail list : Press and hold  X button to zoom in on 
highlighted picture.
Highlight dates/
Highlight images •
Date list : Highlight date.
• Thumbnail list : Highlight picture.
Toggle full frame  playback •
Date list : View pictures taken on selected date.
• Thumbnail list : View highlighted picture.
Delete highlighted  photo(s)
O•Date list : Delete all pictures taken on selected date.
• Thumbnail list : Delete highlighted picture ( 0127).
Change protect 
status of highlighted  photo
A (L )See page 126 for more information.
Return to shooting  mode Press shutter-release button halfway.
 Monitor will turn 
off; photographs can be taken immediately.
Thumbnail list
Date list
W  (Q )
X
W  (Q )
X 
						

							
125
Taking a Closer Look: Playback Zoom
Press the X bu tto n to  zo om  in on  th e im age  d is p layed in full-frame playback or on the 
image currently highlighted in th umbnail or calendar playback.
 The following 
operations can be performed while zoom is in effect:
ToUseDescription
Zoom in or out
X  /  W  (Q )
Press  X to zoom in to maximum of 
approximately 38 × (large images), 28 × 
(medium images) or 19 × (small 
images).
 Press  W (Q ) to zoom out. 
While photo is zoomed in, use multi 
selector to view areas of image not 
visible in monitor.
 Keep multi selector pressed to scroll rapidly 
to other areas of frame.
 Navigation window is displayed when 
zoom ratio is altered; area currently visible in monitor is 
indicated by yellow border.
View other 
areas of image
Select/zoom in  on or out from  faces
P
Faces (up to 35) detected during zoom 
are indicated by white borders in 
navigation window.
 Press  P and use 
the multi selector to view other faces, 
or press  J to zoom in on the currently 
selected face. Press  P again to return 
to normal zoom.
View other  images Rotate command dial to view same location in other images at 
current zoom ratio.
 Playback zoom is cancelled when a
movie is displayed.
Cancel zoom Cancel zoom and return to full-frame playback.
Change protect  status
A (L )See page 126 for more information.
Return to 
shooting mode Press shutter-release button halfway.
 Monitor will turn off; 
photographs can be taken immediately. 
						

							
126
Protecting Photographs from Deletion
In full-frame, zoom, thumbnail, and calendar playback, the A (L ) button can be 
used to protect photographs from accidental deletion.
 Protected files can not be 
deleted using the  O button or the  Delete option in the playback menu.
 Note that 
protected images  will be deleted when the memory card is formatted ( 0168).
To protect a photograph:
1Select an image.
Display the image in full-frame playback or  playback zoom or highlight it in the 
thumbnail list in thumbnail or calendar playback.
2Press the  A (L ) button.
The photograph will be marked with a  P 
icon.
 To remove protection from the 
photograph so that it can be deleted, 
display the photograph or highlight it in the 
thumbnail list and then press the  A (L ) 
button.
Full-frame playback Thumbnail playback Calendar playback
ARemoving Protection from All Images
To remove protection from all images in the folder or folders currently selected in the 
Playback folder  menu (0148), press the  A (L ) and  O buttons together for about two 
seconds during playback.
A  (L ) button 
						

							
127
Deleting Photographs
To delete the photograph displayed in full-frame playback or the photograph 
highlighted in the thumbnail list, press the  O button.
 To delete multiple selected 
photographs, all photographs taken on a selected date, or all photographs in the 
current playback folder, use the  Delete option in the playback menu.
 Once deleted, 
photographs can not be recovered.
Full-Frame, Thumbnail, and Calendar Playback
1Select an image.
Display the image or highlight it in the  thumbnail list in thumbnail or calendar 
playback.
2Press the  O button.
A confirmation dialog will be displayed.
3Press the  O button again.
To delete the photograph, press the  O 
button again.
 To exit without deleting the 
photograph, press the  K button.
Full-frame playback Thumbnail playback Calendar playback 
(thumbnail list)
ACalendar Playback
During calendar playback, you can delete all photographs taken on a selected date by 
highlighting the date in the date list and pressing the  O button ( 0124).
O button 
						

							
128
The Playback Menu
The Delete  option in the playback menu contains the following options. Note that 
depending on the number of images, some  time may be required for deletion.
❚❚Selected: Deleting Selected Photographs
1Select  Delete .
To display the menus, press the  G button. 
Highlight  Delete in the playback menu and 
press 2.
2Choose  Selected .
Highlight  Selected and press 2.
3Highlight a picture.
Use the multi selector to highlight a picture 
(to view the highlighted picture full screen, 
press and hold the  X button).
4Select the highlighted picture.
Press the  W (Q ) button to select the 
highlighted picture.
 Selected pictures are 
marked by a  O icon.
 Repeat steps 3 and 4 to 
select additional pictures; to deselect a 
picture, highlight it and press  W (Q ).
5Press  J to complete the operation.
A confirmation dialog will be displayed; 
highlight  Ye s and press  J.
OptionDescription
Q Selected Delete selected pictures.
n Select date Delete all pictures taken on a selected date.
R All Delete all pictures in the folder currently selected for playback ( 0148).
G  button
W (Q ) button 
						

							
129
❚❚Select Date: Deleting Photographs Taken on a Selected Date
1Choose  Select Date .
In the delete menu, highlight  Select date 
and press 2.
2Highlight a date.
Press  1 or  3 to highlight a date.
To view the pictures taken on the 
highlighted date, press  W (Q ).
 Use the multi 
selector to scroll through the pictures, or 
press and hold  X to view the current picture 
full screen.
 Press  W (Q ) to return to the date 
list.
3Select the highlighted date.
Press  2 to select all pictures taken on the 
highlighted date.
 Selected dates are marked 
with a  M icon.
 Repeat steps 2 and 3 to select 
additional dates; to deselect a date, 
highlight it and press  2.
4Press  J to complete the operation.
A confirmation dialog will be displayed; 
highlight  Ye s and press  J.
W  (Q ) button 
						

							
130
Slide Shows
The Slide show  option in the playback menu is used to display a slide show of the 
pictures in the current playback folder (
0148).
1Select  Slide show .
To display the slide show menu, press the 
G button and select  Slide show in the 
playback menu.
2Adjust slide show settings.
To choose the type of images in the show, 
select  Image type  and choose from  Still 
images and movies , Still images only , and 
Movies only .
To choose how long still images are displayed, 
select  Frame interval  and choose from the 
options shown at right.
G  button 
						

							
131
3Start the slide show.
Highlight Start in the slide show menu and 
press  J.
The following operations can be performe d while the slide show is in progress:
The dialog shown at right is  displayed when the show ends.
 
Select Restart  to restart or  Exit to return to the playback menu.
ToUseDescription
Skip back/skip ahead Press 
4 to return to previous frame,  2 to skip 
to next frame.
View additional photo info Change photo info displayed ( 0119).
Pause/resume slide show Pause show.
 Press again to resume.
Raise/lower volume
X  /  W  (Q )Press  X during movie playback to increase 
volume,  W (Q ) to decrease.
Exit to playback mode
KEnd show and return to playback mode.
Exit to shooting mode Press shutter-release button halfway.
 Monitor 
will turn off; photographs can be taken 
immediately. 
						

							
132
Connections
Install the supplied software to display and 
edit photographs and movies that have 
been copied to your computer.
 Before 
installing ViewNX 2, confirm that your 
computer meets the system requirements 
on page 133.
 The latest version of ViewNX 2 
is available for download from the websites 
listed on page xv.
1Start the computer and insert the installer CD.
2Select a language.
If the desired language is not available, 
click  Region Selection  to choose a 
different region and then choose the 
desired language (region selection is 
not available in the European release).
3Start the installer.
Click  Install  and follow the on-screen instructions.
Installing ViewNX 2
WindowsMac OS
Double-click 
icon on desktop
Double-click 
Welcome  icon
AInstallation Guide
For help installing ViewNX 2, click  Installation Guide 
in Step 3.
Your Imaging Toolbox
ViewNX 2TM
qSelect region (if required)
wSelect 
language
e Click 
Next
Click  Install 
						

							
133
4Exit the installer.
The following software is installed:
5Remove the installer CD from the CD-ROM drive.
WindowsMac OS
Click  Ye s Click OK
•ViewNX 2 •Apple QuickTime ( Windows only)
ASystem Requirements
WindowsMac OS
CPU •
Photos/JPEG movies : Intel Celeron, Pentium 4, 
or Core series, 1.6 GHz or better
• H.264 movies (playback) : 3.0 GHz or better 
Pentium D; Intel Core i5 or better 
recommended when viewing movies with 
a frame size of 1280 × 720 or more at a 
frame rate of 30 fps or above or movies 
with a frame size of 1920 × 1080 or more
• H.264 movies (editing) : 2.6 GHz or better 
Core 2 Duo •
Photos/JPEG movies : Intel Core or Xeon series
• H.264 movies (playback) : Core Duo 2 GHz or 
better; Intel Core i5 or better recommended 
when viewing movies with a frame size of 
1280 × 720 or more at a frame rate of 30 fps 
or above or movies with a frame size of 
1920 × 1080 or more
• H.264 movies (editing) : 2.6 GHz or better 
Core 2 Duo
OS Pre-installed versions of Windows 7 Home 
Basic/Home Premium/Professional/
Enterprise/Ultimate (
64- and 32-bit editions; Service 
Pack 1 ), Windows Vista Home Basic/Home 
Premium/Business/Ent erprise/Ultimate (64- 
and 32-bit editions; Service Pack 2 ), or Windows XP 
Home Edition/Professional ( 32-bit editions only; 
Service Pack 3 ). Mac OS X version 10.6.8, 10.7.5, or 10.8.2
RAM •
Windows 7 /Windows Vista : 1 GB or more ( 2GB or 
more recommended )
• Windows XP : 512 MB or more ( 2GB or more 
recommended ) 512 MB or more (
2GB or more recommended )
Hard-disk  space A minimum of 500 MB available on the startup disk (
1 GB or more recommended)
Monitor Resolution
: 1024×768 pixels ( XGA) or more 
( 1280×1024 pixels (SXGA) or more recommended )
Color : 24-bit color ( Tr u e  Co lo r) or more Resolution
: 1024×768 pixels ( XGA) or more 
( 1280×1024 pixels (SXGA) or more recommended )
Color : 24-bit color ( millions of colors) or more
See the websites listed on page xv for the latest information on supported operating systems.