Netgear Netgar VPN FIrewall FVS336Gv2 Reference Manual

Monitor System Access and Performance 
589  ProSAFE Dual WAN Gigabit WAN SSL VPN Firewall FVS336Gv2
WAN Configuration
WAN Mode The WAN mode can be Single Port, Load Balancing, or Auto Rollover.
For information about configuring the WAN mode, see Manage the IPv4 WAN 
Routing Mode on page
 30.
WAN State The WAN state can be either UP or DOWN, depending on whether the port is 
connected to the Internet.
NAT The NAT state for IPv4 can be either Enabled or Disabled, depending on whether 
NAT is enabled (see...

Monitor System Access and Performance 
590 ProSAFE Dual WAN Gigabit WAN SSL VPN Firewall FVS336Gv2 
View the VLAN Status
You can view information about the VLANs that are enabled. Disabled VLANs are not 
displayed. For information about enabling and disabling VLANs, see 
Assign VLAN Profiles on 
page 11 6.
To view the status of the IPv4 VLANs:
1. On your computer, launch an Internet browser.
2. In the address field of your browser, enter 10.0.0.2 if you log in from the WAN or enter 
192.168.20.0 if you...

Monitor System Access and Performance 
591  ProSAFE Dual WAN Gigabit WAN SSL VPN Firewall FVS336Gv2
If you did not change the domain or were not assigned a domain, leave the menu 
selection at geardomain.
5. Click the Login button.
The Router Status screen displays.
6. Select Monitoring > Router Status > VLAN Status. 
The VLAN Status screen displays.
Note:For information about configuring VLANs, see Manage VLAN Profiles 
on page 119
The following table explains the fields of the VLAN Status screen.
View...

Monitor System Access and Performance 
592 ProSAFE Dual WAN Gigabit WAN SSL VPN Firewall FVS336Gv2 
3. In the Username field, type your user name and in the Password / Passcode field, type 
your password.
For the default administrative account, the default user name is admin and the default 
password is password.
4. If you changed the default domain or were assigned a domain, from the Domain menu, 
select the domain.
If you did not change the domain or were not assigned a domain, leave the menu...

Monitor System Access and Performance 
593  ProSAFE Dual WAN Gigabit WAN SSL VPN Firewall FVS336Gv2
View the VPN Logs
The following sections provide information about viewing the IPSec VPN and SSL VPN logs:
•View the VPN Firewall IPSec VPN Log on page 364
•View the VPN Firewall SSL VPN Log on page 445
View the Port Triggering Status
The following procedure describes how to view the status of the ports that were triggered by 
the port triggering feature.
To view the status of the ports that were...

Monitor System Access and Performance 
594 ProSAFE Dual WAN Gigabit WAN SSL VPN Firewall FVS336Gv2 
The Port Triggering Status screen displays the information that is described in the 
following table.
View the WAN Port Status and Terminate or Establish the 
Internet Connection
You can view the status of the IPv4 and IPv6 WAN connections, the DNS servers, and the 
DHCP servers, and you can terminate or establish the Internet connection.
The following sections provide information about viewing the WAN...

Monitor System Access and Performance 
595  ProSAFE Dual WAN Gigabit WAN SSL VPN Firewall FVS336Gv2
4. If you changed the default domain or were assigned a domain, from the Domain menu, 
select the domain.
If you did not change the domain or were not assigned a domain, leave the menu 
selection at geardomain.
5. Click the Login button.
The Router Status screen displays.
6. Select Network Configuration > WAN Settings > WAN Setup. 
The WAN Setup screen displays the IPv4 settings.
7. Click the Status button...

Monitor System Access and Performance 
596 ProSAFE Dual WAN Gigabit WAN SSL VPN Firewall FVS336Gv2 
8. To terminate an active connection, click the Disconnect button.
9. To establish a connection, click Connect button.
View the Status of an IPv6 WAN Port and Terminate or Establish the 
Connection
If a WAN port is active, you can terminate the connection. If a WAN port is not active, you can 
establish the connection.
To view the IPv6 status of a WAN port and terminate or establish the Internet...

Monitor System Access and Performance 
597  ProSAFE Dual WAN Gigabit WAN SSL VPN Firewall FVS336Gv2
6. Select Network Configuration > WAN Settings > WAN Setup.
The WAN Setup screen displays the IPv4 settings.
7. In the upper right, select the IPv6 radio button. 
The WAN Setup screen displays the IPv6 settings:
8. Click the Status button that corresponds to the WAN interface for which you want to view 
the status. 
The following figure shows a static IP address configuration as an example.
The type of...

Monitor System Access and Performance 
598 ProSAFE Dual WAN Gigabit WAN SSL VPN Firewall FVS336Gv2 
9. To terminate an active connection, click the Disconnect button.
10. To establish a connection, click the Connect button.
Display Internet Traffic by Type of Traffic
If you enabled the WAN traffic meter for an interface (see Configure and Enable the WAN 
IPv4 Traffic Meter on page 558), you can display the Internet traffic by protocol.
To display a report of the Internet traffic by protocol type for a...