Netgear Netgar VPN FIrewall FVS336Gv2 Reference Manual

Monitor System Access and Performance 
579  ProSAFE Dual WAN Gigabit WAN SSL VPN Firewall FVS336Gv2
7. In the General section, clear the Enable NetBIOS check box.
8. In the Traffic Selector section, make the following changes:
•From the Remote IP menu, select Single.
•In the Start IP field, type 10.0.0.2.
This IP address is the WAN IP address of Gateway 2.
9. Click the Apply button.
Your settings are saved.
Configure the VPN Tunnel on Gateway 2 at Site 2
The following procedure describes how you can set...

Monitor System Access and Performance 
580 ProSAFE Dual WAN Gigabit WAN SSL VPN Firewall FVS336Gv2 
8. Click the Apply button.
Your settings are saved.
Change the Remote IP Address in the VPN Policy on Gateway 2 at Site 2
The following procedure describes how to change the local IP address in the VPN policy on 
Gateway 2 at Site 2 to the WAN IP address of the same Gateway 2.
To change the local IP address in the VPN policy on Gateway 2 at Site 2:
1. On your computer, launch an Internet browser.
2. In...

Monitor System Access and Performance 
581  ProSAFE Dual WAN Gigabit WAN SSL VPN Firewall FVS336Gv2
On the Gateway at Site 2, Specify the Syslog Server on Site 1
The following procedure describes how to specify that Gateway 2 at Site 2 must send the syslogs 
to the syslog server that is connected to Gateway 1 at Site 1.
To specify that Gateway 2 at Site 2 must send the syslogs to the syslog server that is 
connected to Gateway 1 on Site 1:
1. On your computer, launch an Internet browser.
2. In the...

Monitor System Access and Performance 
582 ProSAFE Dual WAN Gigabit WAN SSL VPN Firewall FVS336Gv2 
•View the VPN Connection Status, L2TP Users, and PPTP Users
•View the VPN Logs
•View the Port Triggering Status
•View the WAN Port Status and Terminate or Establish the Internet Connection
•Display Internet Traffic by Type of Traffic
•View the Attached Devices
•View the DHCP Log
View the System Status
You can view real-time information about the following important components of the VPN 
firewall:...

Monitor System Access and Performance 
583  ProSAFE Dual WAN Gigabit WAN SSL VPN Firewall FVS336Gv2
4. If you changed the default domain or were assigned a domain, from the Domain menu, 
select the domain.
If you did not change the domain or were not assigned a domain, leave the menu 
selection at geardomain.
5. Click the Login button.
The Router Status screen displays.
The following table explains the fields of the Router Status screen.
ItemDescription
System Info
System Name The NETGEAR system name....

Monitor System Access and Performance 
584 ProSAFE Dual WAN Gigabit WAN SSL VPN Firewall FVS336Gv2 
View the Traffic Statistics for the Interfaces and Change the Polling Interval
The following procedure describes how to view the traffic statistics for the interfaces of the 
VPN firewall and change the polling interval.
To view the traffic statistics for the interfaces and change the polling interval:
1. On your computer, launch an Internet browser.
2. In the address field of your browser, enter 10.0.0.2...

Monitor System Access and Performance 
585  ProSAFE Dual WAN Gigabit WAN SSL VPN Firewall FVS336Gv2
For the default administrative account, the default user name is admin and the default 
password is password.
4. If you changed the default domain or were assigned a domain, from the Domain menu, 
select the domain.
If you did not change the domain or were not assigned a domain, leave the menu 
selection at geardomain.
5. Click the Login button.
The Router Status screen displays.
6. Click the Show...

Monitor System Access and Performance 
586 ProSAFE Dual WAN Gigabit WAN SSL VPN Firewall FVS336Gv2 
Wait for the counter to stop.
b. In the Poll Interval field, enter a new value in seconds.
c. Click the Set interval button.
View Detailed Status Information About the VPN Firewall
The following procedure describes how to view detailed status information about the IP 
addresses and MAC addresses on the VPN firewall, as well as other information.
To view detailed status information about the VPN firewall:...

Monitor System Access and Performance 
587  ProSAFE Dual WAN Gigabit WAN SSL VPN Firewall FVS336Gv2
The following table explains the fields of the Detailed Status screen.
ItemDescription
LAN Port Configuration
The following fields are shown for each of the LAN ports.
VLAN Profile The name of the VLAN profile that you assigned to the LAN port (see Assign 
VLAN Profiles on page
 116). 
If the VLAN is not enabled on this port, the default profile (with VLAN ID 1) is 
assigned automatically. 

Monitor System Access and Performance 
588 ProSAFE Dual WAN Gigabit WAN SSL VPN Firewall FVS336Gv2 
VLAN ID The VLAN ID that you assigned to the LAN port (see Manage VLAN Profiles on 
page  119).
If the default VLAN profile is used, the VLAN ID is 1, which means that all tagged 
and untagged traffic can pass on the LAN port.
MAC Address The MAC address for this port. Note the following about the LAN MAC address:
• All LAN ports that are part of the default VLAN share the same default MAC 
address...