Netgear Netgar VPN FIrewall FVS336Gv2 Reference Manual

Optimize Performance and Manage Your System 
539  ProSAFE Dual WAN Gigabit WAN SSL VPN Firewall FVS336Gv2
If you did not change the domain or were not assigned a domain, leave the menu 
selection at geardomain.
5. Click the Login button.
The Router Status screen displays.
6. Select Administration > SNMP. 
The SNMP screen displays. The following figure shows examples in the SNMP 
Configuration table.
The SNMP Configuration table shows the following columns:
•IP Address. The IP address of the SNMP manager....

Optimize Performance and Manage Your System 
540 ProSAFE Dual WAN Gigabit WAN SSL VPN Firewall FVS336Gv2 
7. In the Create New SNMP Configuration Entry section, enter the settings as described in the 
following table.
8. Click the Add button.
Your settings are saved and the new SNMP configuration is added to the SNMP 
Configuration table.
Change an SNMP Configuration
The following procedure describes how to change an existing SNMP configuration.
SettingDescription
Access From WAN
Enable access from...

Optimize Performance and Manage Your System 
541  ProSAFE Dual WAN Gigabit WAN SSL VPN Firewall FVS336Gv2
To change an SNMP configuration:
1. On your computer, launch an Internet browser.
2. In the address field of your browser, enter the IP address that was assigned to the VPN 
firewall during the installation process.
The VPN firewall factory default IP address is 192.168.1.1.
The NETGEAR Configuration Manager Login screen displays.
3. In the Username field, type your user name and in the Password /...

Optimize Performance and Manage Your System 
542 ProSAFE Dual WAN Gigabit WAN SSL VPN Firewall FVS336Gv2 
Remove One or More SNMP Configurations
The following procedure describes how to remove one or more SNMP configurations that you 
no longer need.
To remove one or more SNMP configurations:
1. On your computer, launch an Internet browser.
2. In the address field of your browser, enter the IP address that was assigned to the VPN 
firewall during the installation process.
The VPN firewall factory...

Optimize Performance and Manage Your System 
543  ProSAFE Dual WAN Gigabit WAN SSL VPN Firewall FVS336Gv2
3. In the Username field, type your user name and in the Password / Passcode field, type 
your password.
For the default administrative account, the default user name is admin and the default 
password is password.
4. If you changed the default domain or were assigned a domain, from the Domain menu, 
select the domain.
If you did not change the domain or were not assigned a domain, leave the menu...

Optimize Performance and Manage Your System 
544 ProSAFE Dual WAN Gigabit WAN SSL VPN Firewall FVS336Gv2 
•Access Type. Read-write user (RWUSER) or read-only user (ROUSER). By default, 
the user Admin is an RWUSER and the user guest is an ROUSER.
•Security Level. The level of security that indicates whether security is disabled:
-NoAuthNoPriv. Both authentication and privacy are disabled.
-AuthNoPriv. Authentication is enabled but privacy is disabled.
-AuthPriv. Both authentication and privacy are...

Optimize Performance and Manage Your System 
545  ProSAFE Dual WAN Gigabit WAN SSL VPN Firewall FVS336Gv2
9. Click the Apply button.
Your settings are saved. If you changed the security level, the new level displays in the 
SNMPv3 User table on the SNMP screen.
Configure the SNMP System Information
The following procedure describes how to configure the SNMP system information.
To configure the SNMP system information:
1. On your computer, launch an Internet browser.
2. In the address field of your...

Optimize Performance and Manage Your System 
546 ProSAFE Dual WAN Gigabit WAN SSL VPN Firewall FVS336Gv2 
8. Enter the settings as described in the following table.
9. Click the Apply button.
Your settings are saved.
Manage the Configuration File
The configuration settings of the VPN firewall are stored in a configuration file on the VPN 
firewall. You can save (back up) the configuration file to a computer, retrieve (restore) it from 
the computer, or upgrade it to a new version.
Once the VPN firewall...

Optimize Performance and Manage Your System 
547  ProSAFE Dual WAN Gigabit WAN SSL VPN Firewall FVS336Gv2
Back Up Settings
The backup feature saves all VPN firewall settings to a file. Back up your settings periodically 
and store the backup file in a safe place.
Tip:You can use a backup file to export all settings to another VPN 
firewall that has the same language and management software 
versions. Remember to change the IP address of the second VPN 
firewall before deploying it to eliminate IP address...

Optimize Performance and Manage Your System 
548 ProSAFE Dual WAN Gigabit WAN SSL VPN Firewall FVS336Gv2 
7. Click the Back Up button.
A screen displays, showing the file name of the backup file (FVS336GV2.cfg).
8. Follow the directions of your browser to save the file.
9. Open the folder in which you saved the backup file and verify that it is saved successfully.
Restore Settings
The following procedure describes how to restore the configuration settings of the VPN 
firewall from a backup file....