Netgear Netgar VPN FIrewall FVS336Gv2 Reference Manual

Protect Your Network 
320 ProSAFE Dual WAN Gigabit WAN SSL VPN Firewall FVS336Gv2 
The pop-up screen displays the dropped IPv4 packets.
8. Click the Stop button. 
9. Wait for the confirmation that the operation succeeded.
10. In the Poll Interval field, enter new poll interval in seconds.
11. Click the Set Interval button. 
12. Close the pop-up screen.
Manage IP/MAC Bindings for IPv6 Traffic
The following sections provide information about managing IP/MAC bindings for IPv6 traffic:
•View and Set Up...

Protect Your Network 
321  ProSAFE Dual WAN Gigabit WAN SSL VPN Firewall FVS336Gv2
For the default administrative account, the default user name is admin and the default 
password is password.
4. If you changed the default domain or were assigned a domain, from the Domain menu, 
select the domain.
If you did not change the domain or were not assigned a domain, leave the menu 
selection at geardomain.
5. Click the Login button.
The Router Status screen displays.
6. Select Security > Address Filter >...

Protect Your Network 
322 ProSAFE Dual WAN Gigabit WAN SSL VPN Firewall FVS336Gv2 
Note:You must specify only once whether you want IP/MAC binding 
violations for IPv6 traffic to be logged and emailed. Your selection 
applies to all IPv6 IP/MAC bindings.
9. Click the Apply button.
Your settings are saved. 
10. In the IP/MAC Bindings section, enter the settings as described in the following table.
11. Click the Add button.
The new IP/MAC rule is added to the IP/MAC Bindings table.
Change an IPv6/MAC...

Protect Your Network 
323  ProSAFE Dual WAN Gigabit WAN SSL VPN Firewall FVS336Gv2
The Router Status screen displays.
6. Select Security > Address Filter > IP/MAC Binding.
The IP/MAC Binding screen displays the IPv4 settings.
7. In the upper right, select the IPv6 radio button. 
The IP/MAC Binding screen displays the IPv6 settings. 
8. In the IP/MAC Bindings table, click the Edit button for the IP/MAC binding that you want to 
change. 
The Edit IP/MAC Binding screen displays.
9. Change the settings. 
You...

Protect Your Network 
324 ProSAFE Dual WAN Gigabit WAN SSL VPN Firewall FVS336Gv2 
7. In the upper right, select the IPv6 radio button. 
The IP/MAC Binding screen displays the IPv6 settings. 
8. In the IP/MAC Bindings table, select the check box to the left of each IP/MAC binding that 
you want to remove or click the Select All button to select all bindings.
9. Click the Delete button.
The selected bindings are removed from the IP/MAC Bindings table.
Change the IP/MAC Binding Polling Interval for IPv6...

Protect Your Network 
325  ProSAFE Dual WAN Gigabit WAN SSL VPN Firewall FVS336Gv2
The pop-up screen displays the dropped IPv6 packets.
9. Click the Stop button. 
10. Wait for the confirmation that the operation succeeded.
11. In the Poll Interval field, enter new poll interval in seconds.
12. Click the Set Interval button. 
13. Close the pop-up screen.
Manage Port Triggering
The following sections provide information about managing port triggering:
•Port Triggering Overview
•Add a Port Triggering Rule...

Protect Your Network 
326 ProSAFE Dual WAN Gigabit WAN SSL VPN Firewall FVS336Gv2 
3. The remote system receives the computer’s request and responds using the incoming port 
or ports that are associated with the port triggering rule on the VPN firewall. 
4. The VPN firewall matches the response to the previous request and forwards the response 
to the computer. 
Without port triggering, the response from the external application would be treated as a new 
connection request rather than a response to a...

Protect Your Network 
327  ProSAFE Dual WAN Gigabit WAN SSL VPN Firewall FVS336Gv2
The Port Triggering screen displays. The following figure shows a rule in the Port 
Triggering Rules table as an example.
7. In the Add Port Triggering Rule section, enter the settings as described in the following 
table.
8. Click the Add button. 
Your settings are saved and the new port triggering rule is added to the Port Triggering 
Rules table.
SettingDescription
Name A descriptive name of the rule for identification...

Protect Your Network 
328 ProSAFE Dual WAN Gigabit WAN SSL VPN Firewall FVS336Gv2 
Change a Port Triggering Rule
The following procedure describes how to change an existing port triggering rule.
To change a port triggering rule:
1. On your computer, launch an Internet browser.
2. In the address field of your browser, enter the IP address that was assigned to the VPN 
firewall during the installation process.
The VPN firewall factory default IP address is 192.168.1.1.
The NETGEAR Configuration Manager...

Protect Your Network 
329  ProSAFE Dual WAN Gigabit WAN SSL VPN Firewall FVS336Gv2
2. In the address field of your browser, enter the IP address that was assigned to the VPN 
firewall during the installation process.
The VPN firewall factory default IP address is 192.168.1.1.
The NETGEAR Configuration Manager Login screen displays.
3. In the Username field, type your user name and in the Password / Passcode field, type 
your password.
For the default administrative account, the default user name is admin...