Netgear Netgar VPN FIrewall FVS336Gv2 Reference Manual

Customize Firewall Protection 
290 ProSAFE Dual WAN Gigabit WAN SSL VPN Firewall FVS336Gv2 
12. Repeat the previous two steps to add more IP addresses to the IP Addresses Grouped 
table.
13. Click the Edit button again.
The IP Groups screen displays. The group configuration is complete.
Change an IP Address Group
The following procedure describes how you can change an existing IP group.
To change an IP group: 
1. On your computer, launch an Internet browser.
2. In the address field of your browser,...

Customize Firewall Protection 
291  ProSAFE Dual WAN Gigabit WAN SSL VPN Firewall FVS336Gv2
The selected IP addresses are removed from the IP Addresses Grouped table.
c. In the IP Address field, type an IP address.
d. Click the Add button.
The IP address is added to the IP Addresses Grouped table.
e. To add another IP address, repeat Step c and Step d.
10. Click the Edit button again.
Your settings are saved and the IP Groups screen displays. The modified IP group 
displays in the Custom IP Groups...

Customize Firewall Protection 
292 ProSAFE Dual WAN Gigabit WAN SSL VPN Firewall FVS336Gv2 
Define a Schedule
Schedules define the time frames under which firewall rules are applied. Three schedules, 
Schedule 1, Schedule 2, and Schedule 3, can be defined, and you can select any one of 
these when defining firewall rules.
Other than the tab that you click to specify the schedule that you want to configure, the procedure 
to define Schedule 2 and Schedule 3 is identical to the procedure to define Schedule...

Customize Firewall Protection 
293  ProSAFE Dual WAN Gigabit WAN SSL VPN Firewall FVS336Gv2
7. In the Scheduled Days section, select a radio button:
•All Days. The schedule is in effect all days of the week.
•Specific Days. The schedule is in effect only on specific days. To the right of the 
radio buttons, select the check box for each day that you want the schedule to be in 
effect.
8. In the Scheduled Time of Day section, select a radio button:
•All Day. The schedule is in effect all hours of the...

Customize Firewall Protection 
294 ProSAFE Dual WAN Gigabit WAN SSL VPN Firewall FVS336Gv2 
•Change an IPv4 QoS Profile
•Remove One or More IPv4 QoS Profiles
IPv4 QoS Profiles Overview
A QoS profile becomes active only when it is associated with a nonblocking inbound or 
outbound firewall rule or service and IPv4 traffic that matches the firewall rule or service is 
processed by the VPN firewall. The Type of Service in the Internet Protocol Suite standards, 
RFC
 1349, defines the priorities.
You can...

Customize Firewall Protection 
295  ProSAFE Dual WAN Gigabit WAN SSL VPN Firewall FVS336Gv2
3. In the Username field, type your user name and in the Password / Passcode field, type 
your password.
For the default administrative account, the default user name is admin and the default 
password is password.
4. If you changed the default domain or were assigned a domain, from the Domain menu, 
select the domain.
If you did not change the domain or were not assigned a domain, leave the menu 
selection at...

Customize Firewall Protection 
296 ProSAFE Dual WAN Gigabit WAN SSL VPN Firewall FVS336Gv2 
8. Enter the settings as described in the following table.
9. Click the Apply button.
Your settings are saved. The new QoS profile is added to the List of QoS Profiles table.
Change an IPv4 QoS Profile
The following procedure describes how to change an existing IPv4 QoS profile.
To change an IPv4 QoS profile:
1. On your computer, launch an Internet browser.
2. In the address field of your browser, enter the IP...

Customize Firewall Protection 
297  ProSAFE Dual WAN Gigabit WAN SSL VPN Firewall FVS336Gv2
3. In the Username field, type your user name and in the Password / Passcode field, type 
your password.
For the default administrative account, the default user name is admin and the default 
password is password.
4. If you changed the default domain or were assigned a domain, from the Domain menu, 
select the domain.
If you did not change the domain or were not assigned a domain, leave the menu 
selection at...

Customize Firewall Protection 
298 ProSAFE Dual WAN Gigabit WAN SSL VPN Firewall FVS336Gv2 
If you did not change the domain or were not assigned a domain, leave the menu 
selection at geardomain.
5. Click the Login button.
The Router Status screen displays.
6. Select Security > Services > QoS Profiles.
The QoS Profiles screen displays.
7. In the List of QoS Profiles table, select the check box to the left of each QoS profile that you 
want to remove, or click the Select All button to select all...

Customize Firewall Protection 
299  ProSAFE Dual WAN Gigabit WAN SSL VPN Firewall FVS336Gv2
Manage Bandwidth Profiles for IPv4 Traffic
Bandwidth profiles determine how fast or slow data is communicated with the hosts. The 
following sections provide information about managing quality of service profiles for IPv4 
firewall rules:
•Bandwidth Profiles Overview
•Add and Enable a Bandwidth Profile
•Change a Bandwidth Profile
•Remove One or More Bandwidth Profiles
Bandwidth Profiles Overview
The purpose of...