Netgear Netgar VPN FIrewall FVS336Gv2 Reference Manual

Set Up Virtual Private Networking With IPSec Connections 
359  ProSAFE Dual WAN Gigabit WAN SSL VPN Firewall FVS336Gv2
11. Specify the settings that are described in the following table.
12. Click the Save button. 
Your settings are saved. Continue the manual configuration of the VPN client with the 
global parameters.
13. In the tree list pane of the Configuration Panel screen, click Global Parameters.
SettingDescription
VPN Client address Either enter 0.0.0.0 as the IP address, or enter a virtual IP...

Set Up Virtual Private Networking With IPSec Connections 
360 ProSAFE Dual WAN Gigabit WAN SSL VPN Firewall FVS336Gv2 
14. Specify the default lifetimes in seconds:
•Authentication (IKE), Default. The default lifetime value is 3600 seconds. Change 
this setting to 28800 seconds to match the configuration of the VPN firewall.
•Encryption (IPSec), Default. The default lifetime value is 1200 seconds. Change this 
setting to 3600 seconds to match the configuration of the VPN firewall.
15. Click the Save...

Set Up Virtual Private Networking With IPSec Connections 
361  ProSAFE Dual WAN Gigabit WAN SSL VPN Firewall FVS336Gv2
Test the NETGEAR ProSAFE VPN Client VPN Tunnel Connection
Note:In this section, the NETGEAR ProSAFE VPN Client is referred to as 
the VPN client.
After you configure the IPSec VPN connection on the VPN firewall and the VPN client, you 
can test the VPN tunnel connection.
The following procedure assumes that you use the default authentication phase name 
Gateway and the default IPSec...

Set Up Virtual Private Networking With IPSec Connections 
362 ProSAFE Dual WAN Gigabit WAN SSL VPN Firewall FVS336Gv2 
Figure 11. VPN client system tray color codes
Both the NETGEAR ProSAFE VPN Client and the VPN firewall provide VPN connection and 
status information. This information is useful for verifying the status of a connection and 
troubleshooting problems with a connection. For more information, see the following 
sections:
•NETGEAR ProSAFE VPN Client Status and Log Information on page 362...

Set Up Virtual Private Networking With IPSec Connections 
363  ProSAFE Dual WAN Gigabit WAN SSL VPN Firewall FVS336Gv2
View the VPN Firewall IPSec VPN Connection Status and 
Terminate or Establish Tunnels
You can view the connection status of all IPSec VPN tunnel sessions on the VPN firewall. 
For a gateway-to-gateway connection, you can terminate or establish a tunnel. For a 
client-to-gateway connection, you can terminate a tunnel. 
To view the status of IPSec VPN tunnels on the VPN firewall and...

Set Up Virtual Private Networking With IPSec Connections 
364 ProSAFE Dual WAN Gigabit WAN SSL VPN Firewall FVS336Gv2 
The Connection Status submenu tabs display with the IPSec VPN Connection Status 
screen in view. The following figure shows an IPSec security association (SA) as an 
example.
The Active IPSec SA(s) table lists each active connection with the information that is 
described in the following table.
7. To disable an active gateway-to-gateway or client-to-gateway VPN IPsec tunnel, in the...

Set Up Virtual Private Networking With IPSec Connections 
365  ProSAFE Dual WAN Gigabit WAN SSL VPN Firewall FVS336Gv2
To display the IPSec VPN log on the VPN firewall:
1. On your computer, launch an Internet browser.
2. In the address field of your browser, enter the IP address that was assigned to the VPN 
firewall during the installation process.
The VPN firewall factory default IP address is 192.168.1.1.
The NETGEAR Configuration Manager Login screen displays.
3. In the Username field, type your...

Set Up Virtual Private Networking With IPSec Connections 
366 ProSAFE Dual WAN Gigabit WAN SSL VPN Firewall FVS336Gv2 
You can change existing policies or manually add new VPN and IKE policies directly in the 
policy tables. 
The following sections provide information about managing IPSec VPN policies manually:
•Manage IKE Policies
•Manage VPN Policies
Manage IKE Policies
The following sections provide information about managing IKE policies:
•IKE Policies
•View the IKE Policies
•Manually Add an IKE...

Set Up Virtual Private Networking With IPSec Connections 
367  ProSAFE Dual WAN Gigabit WAN SSL VPN Firewall FVS336Gv2
View the IKE Policies
The following procedure describes how to view the IKE policies that were automatically 
added and that you manually added.
To view the IKE policies:
1. On your computer, launch an Internet browser.
2. In the address field of your browser, enter the IP address that was assigned to the VPN 
firewall during the installation process.
The VPN firewall factory default IP...

Set Up Virtual Private Networking With IPSec Connections 
368 ProSAFE Dual WAN Gigabit WAN SSL VPN Firewall FVS336Gv2 
Each policy contains the settings that are described in the following table. These settings 
apply to both IPv4 and IPv6 IKE policies. For more information about these settings, see 
Manually Add an IKE Policy on page 368.
Manually Add an IKE Policy
The following procedure describes how to add an IKE policy manually.
To manually add an IKE policy for IPv4 or IPv6:
1. On your computer,...