Home > Netgear > Router > Netgear D7000 Nighthawk Ac1900 Wifi Vdsl Adsl Modem Router User Manual

Netgear D7000 Nighthawk Ac1900 Wifi Vdsl Adsl Modem Router User Manual

Here you can view all the pages of manual Netgear D7000 Nighthawk Ac1900 Wifi Vdsl Adsl Modem Router User Manual. The Netgear manuals for Router are available online for free. You can easily download all the documents as PDF.

Page 61

If your ISP is not in the menu, select Other.
7. Select the vir
tual interface:
• Internet interface. From the menu above the Enable This Interface
 check box, leave the default menu
selection at Internet.
• IPTV interface. From the menu above the Enable This Interface
 check box, select IPTV.
8. From the 
Transfer Mode menu, select VDSL(PTM).
When y
ou select VDSL(PTM) from the Transfer Mode menu, the only option in the DSL Mode menu is VDSL2.
9. Specify that your ISP does not require you to log in:
•If...

Page 62

The following figure shows the settings that display when you configure a VDSL connection for the Internet
interface.
11.
Enter the VDSL settings as described in the following table. Manage the Internet Settings Manually
62
Nighthawk AC1900 WiFi VDSL/ADSL Modem Router Model D7000 

Page 63

Description
Field
These settings are disabled because they do not apply to a VDSL connection.
Multiplexing Method
VPI
VCI
Select the Use VLANID check box and enter the VLAN ID, as indicated by your
ISP
.
A VLAN ID might be required if you subscribe to both Internet service and IPTV
service. In some unusual situations, a VLAN ID is required for VDSL Internet service.
If your ISP did not provide you with a VLAN ID, leave the Use VLANID check box
cleared, which is the def

ault setting.
Use VLANID
If your...

Page 64

Description
Field
Your ISP uses DHCP to assign your DNS servers. Your ISP automatically assigns
this address.
Get Automatically from ISP
If you know that your ISP does not automatically transmit DNS addresses to the
modem router during login, select this option and enter the IP address of your ISP
pr
imary DNS server. If a secondary DNS server address is available, enter it also.
Use These DNS Servers
NAT (Network Address Translation)
NAT allows computers on your home network to share the modem router...

Page 65

If the NETGEAR website does not display within one minute, see Troubleshoot the Internet Connection on page
279.
Specify a VDSL Connection With a Login Requirement and
PPPoE Service
If you want to manually configure the VDSL connection settings, use the information that your ISP gave you to log
in and connect to your Internet service. If you cannot find this information, contact your ISP. Entering incorrect
information might prevent the modem router from connecting to the Internet.
The modem router pro...

Page 66

8.
From the Transfer Mode menu, select VDSL(PTM).
When y
ou select VDSL(PTM) from the Transfer Mode menu, the only option in the DSL Mode menu is VDSL2.
9. Specify that your ISP requires you to log in:
•If you are configuring the Internet interface, scroll down to the Does your Internet connection require a login?
section and select the 
Yes radio button.
• If y
ou are configuring the IPTV interface, scroll down to the Does your IPTV connection require a login?
section and select the 
Yes radio button....

Page 67

11.
Enter the VDSL settings as described in the following table. Description
Field
These settings are disabled because they do not apply to a VDSL connection.
Multiplexing Method
VPI
VCI
Select the Use VLANID check box and enter the VLAN ID, as indicated by your ISP.
A 
VLAN ID might be required if you subscribe to both Internet service and IPTV
service. In some unusual situations, a VLAN ID is required for VDSL Internet service.
If your ISP did not provide you with a VLAN ID, leave the Use VLANID check...

Page 68

Description
Field
Select how the Internet connection functions:
•Always On. Once the Internet connection is established, it remains active. This
is the def
ault setting.
• Dial on Demand. When someone attempts to connect to the Internet, the
Inter

net connection is established. When the idle time-out period expires, the
Internet connection is terminated.
• Manually Connect. You must connect to the Internet manually (see View,
Rene

w, or Release the TCP/IP Internet Connection on page 233 or View,
Estab...

Page 69

Description
Field
Router MAC Address
The Ethernet MAC address that the modem router uses on the Internet port. Some ISPs register the MAC address of the
netw
ork interface card in your computer when your account is first opened. They accept traffic only from the MAC address
of that computer.
This feature allows your modem router to use your computer’s MAC address (also called cloning).
Use the def
ault MAC address.
Use Default Address
The modem router captures and uses the MAC address of the computer...

Page 70

Specify a Cable or Fiber Connection Without a Login
Requirement
If you want to manually configure the cable or fiber connection settings, use the information that your ISP gave you
to connect to your Internet service. If you cannot find this information, contact your ISP. Entering incorrect information
might prevent the modem router from connecting to the Internet.
The modem router pro
vides a virtual Internet interface and a virtual IPTV interface. In most situations, you only need
to configure the...
Start reading Netgear D7000 Nighthawk Ac1900 Wifi Vdsl Adsl Modem Router User Manual

Related Manuals for Netgear D7000 Nighthawk Ac1900 Wifi Vdsl Adsl Modem Router User Manual

All Netgear manuals