Netgear D7000 Nighthawk Ac1900 Wifi Vdsl Adsl Modem Router User Manual

If you did not change the name of the network during the setup process, look for the default WiFi network name
(SSID) and select it. The default SSID is on the product label.
4.
Enter the modem router WiFi password.
The default WiFi password (also referred to as the network key or passphrase) is also on the product label.
5. Clic

k the 
Connect button.
The device connects to the WiFi network of the 
modem router.
Wi-Fi Protected Setup Method
Wi-Fi Protected Setup (WPS) is a standard for easily adding...

•
ISP login. The login that your Internet service provider (ISP) gave you logs you in to your Internet service. Your
ISP gave you this login information in a letter or some other way. If you cannot find this login information, contact
your ISP.
• WiFi network key or password
. Your modem router is preset with a unique WiFi network name (SSID) and
pass
word for WiFi access. This information is on the product label. Use this information to connect a WiFi device
to the WiFi network of the modem router
.
•...

If you cannot locate this information, ask your ISP to provide it. When your Internet connection is working, you no
longer need to launch the ISP login program on your computer to access the Internet. When you start an Internet
application, your modem router automatically logs you in.
Set Up Your 
Modem Router for DSL Service
Y
ou can install your modem router for DSL service or for cable or fiber (Ethernet WAN) service. If you use a DSL
modem, f

ollow the procedure that is described in Cable the Modem...

Figure 6. Modem router cabling for DSL service
To connect your modem router to a DSL service: 1.
Unplug your DSL modem’s power, leaving the DSL modem connected to the wall jack for your Internet service.
2. If your DSL modem includes a battery backup, remove the battery.
3. Install an ADSL or DSL microfilter between the phone line and the phone.
The product package contains either an ADSL or DSL microfilter.
4. Use a phone cable to connect the microfilter to the gray DSL port on the modem router.
The...

8.
If the Power LED does not light, press the Power On/Off button.
W
ait for the WiFi LED   to light solid white.
9. If the WiFi LED does not light, press the WiFi On/Off button  .
10. Check the DSL LED  .
If the modem router is connected to a DSL service, the DSL LED lights white.
11. Connect a computer to the modem router
 by one of the following methods:
• Ethernet cable. Use an Ethernet cable to connect your computer to a yellow Ethernet LAN port on the
modem router.
The product pac
 kage contains a...

The modem router checks the Internet connection.
If the Configuring the Internet Connection page displays, skip to Step 14. If it does not display, do the following:
a.
In the address field of the web browser, enter 
www.routerlogin.net.
b. When prompted, enter 
admin for the user name and password for the password.
If the Configuring the Internet Connection page displays, skip to Step 14. If it still does not display, see Step 13.
13. If the browser cannot display the web page, do the following:
a.Make...

15.
From the Internet Service Provider menu, select the Internet service provider (ISP) that you are using.
If your ISP is not in the menu, select 
Other.
16. Select the Yes radio button.
17. Clic

k the 
Next button. When the modem router is connected to the Internet, the Congratulations! page displays, and you successfully
completed the setup process. If the Congratulations! page does not display, other pages might display and you
might need to provide more information, in which case you must continue...

a.
Select the Yes radio button.
b. Click the 
Next button.
The Setup Wizard performs a full scan, which might take up to six minutes. 19.
(Only if the following page displays) Specify how to manage problems with the detection of the Internet connection.
The page that might display states that a problem occurred while the wizard was detecting the Internet connection.
If this page does not display, continue with Step 20. Take one of the following actions:
•
If you did not yet power cycle the modem, do so...

a.
Fully insert the DSL cable in the correct port on the modem and in the gray DSL port on the modem
router.
b. Select the I corrected a problem with the DSL/Ethernet cable radio button.
c. Clic
k the 
Next button.
• If y
ou do not need to power cycle the modem or the DSL cable is already fully inserted in the correct ports,
do the following:
a. Select the None of the above radio button.
b. Clic

k the 
Next button.
20. (Only if the f
ollowing page displays) Specify how to manage problems with the...

a.
Select the Yes radio button.
b. Clic
k the Next button. c.
Enter the address information that your ISP gave you for your fixed IP address configuration.
d. Click the 
Next button.
• If y
our ISP did not assign you a fixed IP address or you do not know if your ISP assigned you a fixed IP
address, do the following:
a. Select either the No or the I don’t know
 radio button.
b. Click the Next
 button. c.
Enter the MAC address of the computer or router with which you previously were able to connect to the...