Netgear D7000 Nighthawk Ac1900 Wifi Vdsl Adsl Modem Router User Manual

The following figure shows the settings that display when you configure an ADSL connection for the Internet
interface.
12.
Enter the ADSL settings as described in the following table. Manage the Internet Settings Manually
51
Nighthawk AC1900 WiFi VDSL/ADSL Modem Router Model D7000 

Description
Field
Select LLC-BASED or VC-BASED, as indicated by your ISP.
The m
ultiplexing method can either be virtual circuit (VC) based or logical link control
(LLC) based. This setting does not apply to the IPTV interface.
Note
Multiplexing Method
Enter a number between 0 and 255 for the virtual circuit number for the virtual path
identifier (VPI), as indicated by your ISP.
If your ISP did not provide you with a VPI setting, leave the default setting (8). The
VPI might be required not only for a...

Description
Field
Enter the account name, as indicated by your ISP. This name might also be called
the host name.
If your ISP did not provide you with an account name or host name, leave the default
setting.
Account Name
Enter the domain name, as indicated by your ISP.
If your ISP did not provide you with a domain name, leave this field blank.
Domain Name
Internet IP Address or IPTV IP Address (depending on your selection in Step 7)
Y
our ISP uses DHCP to assign your IP address. Your ISP automatically...

Description
Field
Use the default MAC address.
Use Default Address
The modem router captures and uses the MAC address of the computer that you
are no
w using. You must use the one computer that is registered by the ISP.
Use Computer MAC Address
Enter the MAC address that you want to use. By default, the field displays the MAC
address of the Internet port.
Use This MAC Address
DHCP Options
Enter the vendor class identifier (VCI) string, as indicated by your ISP.
If your ISP did not provide you with a VCI...

To view or specify the settings for an ADSL Internet connection that requires a login and uses a
PPPoE or PPPoA service:
1.
Launch a web browser from a computer or WiFi device that is connected to the network.
2. Enter http://www.routerlogin.net.
A login window opens.
3. Enter the 
modem router user name and password.
The user name is 
admin. The default password is password. The user name and password are case-sensitive.
The BASIC Home page displays.
4. Select Internet.
The Inter

net Setup page...

The following figure shows the settings that display when you configure an ADSL connection for the Internet
interface.
12.
Enter the ADSL settings as described in the following table. Manage the Internet Settings Manually
56
Nighthawk AC1900 WiFi VDSL/ADSL Modem Router Model D7000 

Description
Field
Select LLC-BASED or VC-BASED, as indicated by your ISP.
The m
ultiplexing method can either be virtual circuit (VC) based or logical link control
(LLC) based. This setting does not apply to the IPTV interface.
Note
Multiplexing Method
Enter a number between 0 and 255 for the virtual circuit number for the virtual path
identifier (VPI), as indicated by your ISP.
If your ISP did not provide you with a VPI setting, leave the default setting (8). The
VPI might be required not only for a...

Description
Field
Select the encapsulation, as indicated by your ISP:
•PPPoE (PPP over Ethernet). Your Internet connection uses PPP over Ethernet.
• PPPoA (PPP over ATM). Your Internet connection uses PPP over ATM.
Encapsulation
Enter the login name that y
ou use to log in to your Internet service, as indicated by
your ISP.
This login name is often an email address.
Login
Enter the password that you use to log in to your Internet service, as indicated by
your ISP.
Password
Enter the service name that you...

Description
Field
Enter the IP address, IP subnet mask, and gateway IP address that your ISP
assigned you for static IP address service. The gateway is the ISP router to which
your modem router connects.
Use Static IP Address
Domain Name Ser
ver (DNS) Address
The DNS server is used to look up site addresses based on their domain names.
Your ISP uses DHCP to assign your DNS servers. Your ISP automatically assigns
this address.
Get Automatically from ISP
If you know that your ISP does not automatically...

Manually Set Up a VDSL Internet Connection
You can view or change the modem router’s VDSL Internet connection settings manually. The following sections
descr
ibe the options that are available to you to manually set up the VDSL Internet connection:
• Specify a VDSL Connection Without a Login Requirement on page 
60
• Specify a VDSL Connection With a Login Requirement and PPPoE Service on page 
65 Some ISPs require that you register on their website before you can obtain Internet service.
Follow the...