Netgear D7000 Nighthawk Ac1900 Wifi Vdsl Adsl Modem Router User Manual

Your settings are saved.
Set Up an IPv6 6to4 Tunnel Connection
With an IPv6 connection, your modem router creates a 6to4 tunnel to a remote relay router. Make sure that the IPv4
Internet connection is working before you apply the 6to4 tunnel settings for the IPv6 connection. Follow the directions that your IPv6 ISP gave you.
Note
To set up an IPv6 Internet connection by using a 6to4 tunnel: 1.
Launch a web browser from a computer or WiFi device that is connected to the network.
2. Enter...

5.
From the Internet Connection Type menu, select 6to4 Tunnel. The 
modem router automatically detects the information in the Router’s IPv6 Address On LAN field. This field
shows the IPv6 address that is acquired for the modem router’s LAN interface. The number after the slash (/)
is the length of the prefix, which is also indicated b

y the underline (_) under the IPv6 address.
6. Select a Remote 6to4 Relay Router radio button:
•Auto
. Your modem router uses any remote relay modem router that is...

Your settings are saved.
Set Up an IPv6 Pass-Through Connection
In IPv6 pass-through mode, the modem router works as a Layer 2 Ethernet switch with two ports (LAN and WAN
Ether
net ports) for IPv6 packets. The modem router does not process any IPv6 header packets. Follow the directions that your IPv6 ISP gave you.
Note
To set up an IPv6 pass-through Internet connection: 1.
Launch a web browser from a computer or WiFi device that is connected to the network.
2. Enter 
http://www.routerlogin.net.
A login...

A login window opens.
3. Enter the modem router user name and password.
The user name is 
admin. The default password is password. The user name and password are case-sensitive.
The BASIC Home page displays.
4. Select ADVANCED > Advanced Setup > IPv6.
The IPv6 page displa

ys.
5. From the 
Internet Connection Type menu, select Fixed. 6.
Configure the fixed IPv6 addresses for the WAN connection:
•IPv6 Address/Prefix Length
. The IPv6 address and prefix length of the modem router WAN interface that
your...

If you do not specify the DNS servers, the modem router uses the DNS servers that are
configured f
or the IPv4 Internet connection on the Internet Setup page (see Manually Set Up
an ADSL Internet Connection on page 49, Manually Set Up a VDSL Internet Connection on
page 60, or Manually Set Up a Cable or Fiber Internet Connection on page 69).
Note
7. Select an IP Address Assignment r

adio button:
• Use DHCP Server. The modem router assigns IPv6 addresses to the devices on your home network (the
LAN)...

The IPv6 page displays.
5. From the Internet Connection Type menu, select DHCP. The 
modem router automatically detects the information in the following fields:
• Router’s IPv6 Address On WAN
. This field shows the IPv6 address that is acquired for the modem router’s
WAN (or Internet) interface. The number after the slash (/) is the length of the prefix, which is also i\
ndicated
by the underline (_) under the IPv6 address. If no address is acquired, the field displays Not Available.
• Router’s IPv6...

•
Use DHCP Server. The modem router assigns IPv6 addresses to the devices on your home network (the
LAN) through a DHCP ser
ver. This method passes more information to LAN devices, but some IPv6 systems
might not support the DHCPv6 client function. This is the default setting.
• Auto Config
. The modem router automatically configures its IPv6 address based on the IPv6\
 protocol.
9. T
o specify the interface ID for the IPv6 address of the modem router’s LAN interface, select the 
Use This
Interface ID...

5.
From the Internet Connection Type menu, select PPPoE. The 
modem router automatically detects the information in the following fields:
• Router’s IPv6 Address On WAN
. This field shows the IPv6 address that is acquired for the modem router’s
WAN (or Internet) interface. The number after the slash (/) is the length of the prefix, which is also i\
ndicated
by the underline (_) under the IPv6 address. If no address is acquired, the field displays Not Available.
• Router’s IPv6 Address On LAN. This field...

The default setting of the Connection Mode menu is Always On to provide a steady IPv6
connection.
The modem router never terminates the connection. If the connection is
ter

minated, for example, when the modem is turned off, the modem router attempts to
reestab

lish the connection immediately after the PPPoE connection becomes available again.
Note
9. Select an IP Address Assignment radio button:
•Use DHCP Server. The modem router assigns IPv6 addresses to the devices on your home network (the
LAN)...

5.
From the Internet Connection Type menu, select Auto Config. The 
modem router automatically detects the information in the following fields:
• Router’s IPv6 Address On WAN
. This field shows the IPv6 address that is acquired for the modem router’s
WAN (or Internet) interface. The number after the slash (/) is the length of the prefix, which is also i\
ndicated
by the underline (_) under the IPv6 address. If no address is acquired, the field displays Not Available.
• Router’s IPv6 Address On LAN. This...