NEC Xl 6500 Projector User Manual

41
Enables you to program to turn on or off your projector automati-
cally at a specified time. The two timer functions are available: On/
Off Timer and Sleep Timer.
NOTE: When the On Timer is set and the projector is in standby, the
two digit indicator flashes 00 to indicate that the On Timer is
active.
Proceed as follows:
 ¥ Before setting On/Off Timer, maker sure that Date, Time Preset
feature is set.
 ¥ Even after setting On/Off Timer, turning the projector on or off
with the remote control is...

42 3.OPERATION
4) Select the Entry and press ENTER. This enables the On Timer or
Off Timer function.
To cancel your data such as week, day, on/off time, select the Cancel
and press ENTER.
To delete the setting data such as week, day and on/off time for the
program number, select the Clear and press ENTER.
NOTE:
When setting On Timer during cooling the fan, the projector will
turn on after the cooling has finished.
To set the Sleep Timer:
1) Use the CURSOR 
 or  button to select the Sleep Timer and
press...

43
Adjusting and Setting (Adjustment)
Source Registry
On Source Registry
The projector uses a micro-processor to automatically read and
distinguish between all video signals input at the same time. These
signals are then used to make optimum adjustments for best image.
Various parameters must be registered into the micro-processor
beforehand to ensure the video signals are recognized and adjusted to
optimum quality.
This function registers these video signals in the Source Select list
and at the same...

44 3.OPERATION
Items to select
¥ New Entry ----- Registers a new signal.
¥ Registry Edit. - Changes setting various parameters of the
registered signals.
3Use the CURSOR 
or button to highlight the Ò1.New
RegistryÓ line and press ENTER.
¥ The Ò1. SlotÓ menu is displayed. Then proceed as follows:
1. Select slot.
2. Select signal system.
3. Set HDTV or not when selecting component signal.
4. Input a user name.
5. Select a location number for your registry.
To advance the next item, select Next 
 and press...

45
Source Registry
1. INPUT A
2. Signal
3. HDTV
4. User  Name
5. No.Select Signal System
 Cancel2. Signal System
RGB
C-Video
S-Video
COMPONENT
Source Registry
1. INPUT  A
2. COMPONENT
3. HDTV
4. User  Name
5. No.Is Signal HDTV?
 Cancel3. HDTV
Yes
No
Source Registry
1. INPUT A
2. COMPONENT
3. HDTV  Mode
4. User  Name
5. No.Input User Name
 Cancel4. User Name
[          ]4) To Input a User Name.
Input the source name by selecting one character at a time with
the INPUT buttons 1 through 10 and by moving the...

46 3.OPERATION
For example: A ® B ® C ®1 ® A .....
¥ When pressing the INPUT button while holding down the
CTL button, another group of characters will be rotated.
For example: a ® b ® c ® ! ® a .....
¥ The characters corresponding to these INPUT buttons are as
follows:
When using With CTL
INPUT 1 A, B, C, and 1 a, b, c, and !
INPUT 2 D, E, F, and 2 d, e, f, and Ò\par INPUT 3 G, H, I, and
3 g, h, i, and #
INPUT 4 J, K, L, and 4 j, k, l, and $
INPUT 5 M, N, O, and 5 m, n, o, and %
INPUT 6 P, Q, R, and 6...

47
n Registry Edit
This feature allows you to change various parameters of the
source on the selected line. This can be done to the current
projected signal as well as not projected source.
To edit the registered signal, proceed as follows:
1) Press the ADJUST button.
 ¥ The Adjust menu is displayed.
2) Use the CURSOR 
or button to highlight the Ò1.Source
RegistryÓ line and press ENTER.
 ¥ The Source Registry menu will be displayed.
 ¥ You can also select the Source Registry menu directly by
pressing the...

48 3.OPERATION
Amplitude
Enables you to adjust the horizontal and vertical amplitude of the
image.
NOTE: Normally use the normal value.
Use the CURSOR 
or to adjust the horizontal amplitude.
Use the CURSOR 
or to adjust the vertical amplitude.
When the amplitude adjusting is completed, press the END button.
White Balance
White Balance
- White /Black Level -
255
0 WhiteRed64
128 Blue
Black
Enables you to adjust the white balance of the image.
Items to select
¥ White/Red-Blue ---------- Adjust the white...

49
Uniformity
-Uniformity-
1. White Uniformity
2. Edge Blending
Enables you to adjust the white uniformity and edge blending.
The white uniformity feature allows you to adjust color balance on
the left and right side of the screen; the edge-blending feature allows
you to adjust the brightness on the area which two images projected
from the two projectors are overlapped.
To Adjust White Uniformity
1) Press R or B button while pressing and holding CTL to select
the color you want to adjust. Note that Green...

50 3.OPERATION
Display Function
Enables you to adjust various items such as the input signal size,
output signal size, output position, interlace mode and sync protect if
the image is not displayed correctly. Normally you do not need to set
these items.
1) Input Signal Size
Adjusts the size of input signal.
The CURSOR 
or button adjusts the horizontal size.
The CURSOR 
or button adjusts the vertical size.
2) Output Signal Size
Adjusts the size of output picture.
The CURSOR 
or button adjusts the...