NEC Xl 6500 Projector User Manual

MultiSync Hivid 6500 Projector
Large Screen MultiSync Projection System
UserÕs Manual
Model number: XL-6500/XL-6500G 

2
CAUTION: To turn off main power, be sure to remove the
plug from power outlet. The power outlet socket should be
installed as near to the equipment as possible, and should
be easily accessible.
3. GSGV Acoustic Noise Information Ordinance:
The sound pressure level is less than 70 dB(A) according to
ISO 3744 or ISO 7779.
WARNING
TO PREVENT FIRE OR SHOCK HAZARDS, DO NOT EXPOSE
THIS UNIT TO RAIN OR MOISTURE. ALSO DO NOT USE THIS
UNITÕS POLARIZED PLUG WITH AN EXTENSION CORD
RECEPTACLE OR OTHER OUTLETS,...

3
INTRODUCTION
Important Safeguards
These safety instructions are to ensure the long life of your projector and to prevent fire and shock. Please read them carefully and heed
all warnings.
Installation
1. Place the projector on a flat, level surface and in a dry area free from dust and moisture.
2. Do not place the projector in direct sunlight, near heaters or heat radiating appliances.
3. Exposure to direct sunlight, smoke or steam could harm internal components.
4. Handle your projector carefully....

4
INTRODUCTION
Recommandations importantes
Ces instructions de sŽcuritŽ ont pour but dassurer une longue vie ˆ votre projecteur et dŽviter un incendie ou une dŽcharge

Installation
1. 
2. 
chaleur.
3. Lexposition aux rayons directs du soleil, ˆ la fumŽe ou ˆ la vapeur pourrait endommager des composants internes.
4. Manipuler le projecteur avec prŽcautions. Laisser tomber le projecteur ou lui donner des chocs pourrait endommager des
composants internes.
5. Ne pas poser dobjets lourds sur le dessus du...

5
VISUAL SYSTEMS DIVISION
NEC Technologies, Inc.(hereafter NECTECH)warrants this prod-
uct to be free from defects in material and workmanship under the
following terms.
HOW LONG IS THE WARRANTY
Parts and labor are warranted for (1) One Year  from the date of
the first customer purchase. The lamp is warranted for 1000
hours of operating time or 90 days, whichever comes first.
WHO IS PROTECTED
This warranty may be enforced only by the first purchaser.
WHAT IS COVERED AND WHAT IS NOT COVERED
Except as...

6
123456
123456
123456
123456
123456
123456 TABLE OF CONTENTS.
INTRODUCTION
Introduction To The MultiSync Hivid 6500 Projector .............. 7
How Do You Get Started? ....................................................... 7
WhatÕs In The Box? ................................................................ 7
1.PART NAMES AND FUNCTIONS
Input Panel Features ............................................................... 8
Remote Control Features ...................................................... 12...

7
123456
123456
123456
123456
123456
123456 INTRODUCTION.
This section introduces you to your new MultiSync Hivid 6500 Projector, provides a list of materials that
comes with your projector and describes the features and controls.
Congratulations On Your Purchase Of The MultiSync Hivid 6500 Projector
The MultiSync Hivid 6500 is one of the very best projectors available today. Digital Light ProcessingTM
(DLPTM ) by Texas Instruments enables you to project high bright precise images up to 500 inches...

8
1234567
1234567
1234567
1234567
1234567
1234567 1.PART NAMES AND FUNCTIONS.
1Breaker Switch
Press the switch to the ON position to turn on the breaker
and press to the OFF position to turn off the breaker.
When abnormal conditions are encountered, the breaker
will trip and turn the projector off.
If the projector will not be used for an extended period of
time, turn off the breaker by pressing the switch to the
OFF position.
2Remote Sensor
Receives the signal from the supplied remote control
when used...

9
POWER ON/OFF
OFF ON
IN OUT POWER STANDBY RCREADY
INDICATOR
REMOTE2
IN OUTOPTION REMOTE1
VIDEO BNC RCA VIDEO S-VIDEO R/Cr G/Y B/Cb H/HV V OSD OUTLAMP
1.PART NAMES AND FUNCTIONS
BOPTION Connectors (D-Sub 9-pin)
For system expansion such as PC-control.
IN: connect to the external equipment such as PC.
OUT: for daisy-chaining multiple projectors and operating
them with the same external equipment. To do so, connect
to a second projectorÕ s IN terminal to relay the input at
the IN terminal of the first...

10 1.PART NAMES AND FUNCTIONS
OPTIONAL Boards
VIDEO INPUT Board [XG VIDIN (A)]
Front view
1Active Indicator (green LED) ......Lights up when this board is selected.
2VIDEO INPUT Terminal ...............Connects composite video output signals.
3S-VIDEO INPUT Terminal ...........Connects S-video output signals.
4VIDEO INPUT Terminal ...............Connect to the audio outputs of the external equipment such as a VCR.
(Not available on this model.)
5S-VIDEO INPUT Terminal ...........Connect to the S-video...