NEC Variable Forward No Answer Operations Guide

NDA-30155  Revision 1.0Page 5
Variable Forward No Answer Operations Guide Installation
Figure 2-3   Release Media Devices 
4. Type F for floppy disk, then press Enter.
The Install Procedure screen displays (Figure 2-4).
Figure 2-4   Install Procedure 
5. Insert your disk, then press Enter. 
The display prompts: Has all release media been loaded [y or n] ?
6. Type Y, then press Enter. 
The Processing Files screen displays (Figure 2-5). 

Page 6NDA-30155  Revision 1.0
Installation Variable Forward No Answer Operations Guide
Figure 2-5   Processing Files 
The VFNA application is now installed.
7. Press Enter to return to the APM Administration Main Menu screen. 
The APM Administration Main Menu displays (Figure 2-6).
Figure 2-6   APM Administration Main Menu 
8. If you now wish to exit the APM system, press L for Logout. 

NDA-30155  Revision 1.0Page 7
Variable Forward No Answer Operations Guide Configuration
Chapter 3 Configuration
This chapter provides step-by-step instructions for configuring the VFNA 
application.
Note:The VFNA installation process automatically performs all necessary 
configuration functions. The section below entitled Modifying the Installed 
Configuration shows you how to manually modify these installed parameters.
Database Administration
The Variable Forward No Answer application uses the APM...

Page 8NDA-30155  Revision 1.0
Configuration Variable Forward No Answer Operations Guide
Figure 3-1   System Administration 
2. Select A for Application Configuration, then press Enter.
The Application Selection screen displays (Figure 3-2).
Figure 3-2   Application Selection 
3. Press S for Select, then press Enter.
4. Cursor down to vfna. 
Note:Use the Page Down key if more screen choices are needed.
5. Select vfna, then press Enter.
The Configuration Entry screen displays (Figure 3-3). 

NDA-30155  Revision 1.0Page 9
Variable Forward No Answer Operations Guide Configuration
Figure 3-3   Configuration Entry 
6. Select O for OAI-Conf, then press Enter. 
The vfna/Database Name screen displays (Figure 3-4).
Figure 3-4   vfna/Database Name 
7. Select U for User Defined, then press Enter.
The vfna/User Defined screen displays (Figure 3-5). 

Page 10NDA-30155  Revision 1.0
Configuration Variable Forward No Answer Operations Guide
Figure 3-5   vfna/User Defined 
8. Select M for Modify, then press Enter.
9. Select User Defined #1, then type in the monitored number, then press Enter 
to accept it.
10. Select User Defined #2, then type in the monitored number’s tenant, then 
press Enter to accept it.
11. Select User Defined #3, then type in the forward extension busy call number, 
then press Enter to accept it.
Note:A sample setting might be as...

NDA-30155  Revision 1.0Page 11
Variable Forward No Answer Operations Guide Configuration
Figure 3-6   Administration Main Menu 
Your user defined settings are now complete.
Modifying the Installed Configuration
Use the following steps to manually modify the installed configuration parameters.
1. Go to the System Administration screen. 
The System Administration screen displays (Figure 3-7).
Note:See the Applications Manager documentation for more information on this 
screen. 

Page 12NDA-30155  Revision 1.0
Configuration Variable Forward No Answer Operations Guide
Figure 3-7   System Administration 
2. Select A for Application Configuration, then press Enter.
The Application Selection screen displays (Figure 3-8).
Figure 3-8   Application Selection 
3. Press S for Select, then press Enter.
4. Cursor down to vfna. 
Note:Use the Page Down key if more screen choices are needed.
5. Select vfna, then press Enter.
The Configuration Entry screen displays (Figure 3-9). 

NDA-30155  Revision 1.0Page 13
Variable Forward No Answer Operations Guide Configuration
Figure 3-9   Configuration Entry 
This screen shows the installed default configuration. To modify the 
application name, do as follows:
Note:This is the only item you would reasonably change.
6. Select M for Modify, then press Enter.
7. Select the application name, then change it to the new name.
8. Press Enter to accept the change.
9. Press the Escape key to return to the command line.
Note:The command line is the...

Page 14NDA-30155  Revision 1.0
Configuration Variable Forward No Answer Operations Guide
Figure 3-10   Administration Main Menu 
The modification of the installed default configuration of the VFNA application is 
now complete.