NEC Projector PH1202HL User Manual
Here you can view all the pages of manual NEC Projector PH1202HL User Manual. The NEC manuals for Projector are available online for free. You can easily download all the documents as PDF.
Page 131
![Page 131
116
WIRED LAN
PROFILES• The settings for using the built-in Ethernet/HDBaseT port in the
projector can be recorded in the projector memory in two ways.
• Select [PROFILE 1] or [PROFILE 2] and then do settings for
[DHCP] and the other options.
After doing this, select [OK] and press the ENTER button. This
will store your settings in memory.
• To recall the settings from memory:
After selecting [PROFILE 1] or [PROFILE 2] from the [PRO-
FILES] list.
Select [OK] and press the ENTER button.
•...](http://img.usermanuals.tech/thumb/54/100321/w300_projector_manual_9401_d-130.png "Page 131
116
WIRED LAN
PROFILES• The settings for using the built-in Ethernet/HDBaseT port in the
projector can be recorded in the projector memory in two ways.
• Select [PROFILE 1] or [PROFILE 2] and then do settings for
[DHCP] and the other options.
After doing this, select [OK] and press the ENTER button. This
will store your settings in memory.
• To recall the settings from memory:
After selecting [PROFILE 1] or [PROFILE 2] from the [PRO-
FILES] list.
Select [OK] and press the ENTER button.
•...")
116 WIRED LAN PROFILES• The settings for using the built-in Ethernet/HDBaseT port in the projector can be recorded in the projector memory in two ways. • Select [PROFILE 1] or [PROFILE 2] and then do settings for [DHCP] and the other options. After doing this, select [OK] and press the ENTER button. This will store your settings in memory. • To recall the settings from memory: After selecting [PROFILE 1] or [PROFILE 2] from the [PRO- FILES] list. Select [OK] and press the ENTER button. •...
Page 132
117 PROJECTOR NAME PROJECTOR NAMESet a unique projector name. Up to 16 alphanu- meric characters and symbols DOMAIN Set a host name and domain name of the projector. HOST NAMESet a host name of the projector.Up to 15 alphanumeric characters DOMAIN NAMESet a domain name of the projector.Up to 60 alphanumeric characters 5. Using On-Screen Menu
Page 133
![Page 133
118
ALERT MAIL
ALERT MAILThis option will notify your computer of error messages via e-mail
when using wireless or wired LAN.
Placing a checkmark will turn on the Alert Mail feature.
Clearing a checkmark will turn off the Alert Mail feature.
Sample of a message to be sent from the projector:
Subject: [Projector] Projector Inf ormation
THE COOLING FAN HAS STOPPED.
[INFORMATION]
PROJECTOR NAME: PH1202HL Ser ies
LIGHT HOURS USED: 0000[H]
FILTER HOURS USED: 0000[H]
—
HOST NAMEType in a host name.Up to...](http://img.usermanuals.tech/thumb/54/100321/w300_projector_manual_9401_d-132.png "Page 133
118
ALERT MAIL
ALERT MAILThis option will notify your computer of error messages via e-mail
when using wireless or wired LAN.
Placing a checkmark will turn on the Alert Mail feature.
Clearing a checkmark will turn off the Alert Mail feature.
Sample of a message to be sent from the projector:
Subject: [Projector] Projector Inf ormation
THE COOLING FAN HAS STOPPED.
[INFORMATION]
PROJECTOR NAME: PH1202HL Ser ies
LIGHT HOURS USED: 0000[H]
FILTER HOURS USED: 0000[H]
—
HOST NAMEType in a host name.Up to...")
118 ALERT MAIL ALERT MAILThis option will notify your computer of error messages via e-mail when using wireless or wired LAN. Placing a checkmark will turn on the Alert Mail feature. Clearing a checkmark will turn off the Alert Mail feature. Sample of a message to be sent from the projector: Subject: [Projector] Projector Inf ormation THE COOLING FAN HAS STOPPED. [INFORMATION] PROJECTOR NAME: PH1202HL Ser ies LIGHT HOURS USED: 0000[H] FILTER HOURS USED: 0000[H] — HOST NAMEType in a host name.Up to...
Page 134
119 NETWORK SERVICE HTTP SERVERSet a password for your HTTP server.Up to 10 alphanumeric characters PJLink This option allows you to set a passw ord when you use the PJLink feature. NOTE: • Do not forget your password. However, if you forget your password, consult with your dealer. • What is PJLink? PJLink is a standardization of protocol used for controlling projectors of different manufacturers. This standard protocol is established by Japan Business Machine and Information System Industries...
Page 135
![Page 135
120
[SOURCE OPTIONS]
Setting Auto Adjust [AUTO ADJUST]
This feature sets the Auto Adjust mode so that the computer signal can be automatically or manually adjusted for
noise and stability. You can automatically make adjustment in tw o w ays: [NORMAL] and [FINE].
OFF ........................The computer signal will not be automatically adjusted. You can manually optimize the computer signal.
NORMAL
................Default setting. The computer signal will be automatically adjusted. Nor\
mally select...](http://img.usermanuals.tech/thumb/54/100321/w300_projector_manual_9401_d-134.png "Page 135
120
[SOURCE OPTIONS]
Setting Auto Adjust [AUTO ADJUST]
This feature sets the Auto Adjust mode so that the computer signal can be automatically or manually adjusted for
noise and stability. You can automatically make adjustment in tw o w ays: [NORMAL] and [FINE].
OFF ........................The computer signal will not be automatically adjusted. You can manually optimize the computer signal.
NORMAL
................Default setting. The computer signal will be automatically adjusted. Nor\
mally select...")
120 [SOURCE OPTIONS] Setting Auto Adjust [AUTO ADJUST] This feature sets the Auto Adjust mode so that the computer signal can be automatically or manually adjusted for noise and stability. You can automatically make adjustment in tw o w ays: [NORMAL] and [FINE]. OFF ........................The computer signal will not be automatically adjusted. You can manually optimize the computer signal. NORMAL ................Default setting. The computer signal will be automatically adjusted. Nor\ mally select...
Page 136
![Page 136
121
[SEAMLESS SWITCHING]
When the input connector is switched, the image displayed before switching is held to switch to the new image without
a break due to absence of a signal.
Setting Closed Caption [CLOSED CAPTION]
This option sets several closed caption modes that allow text to be superimposed on the projected image of Video
or S-Video.
The subtitles and text will be displayed a short while after the on-screen menu disappears.
OFF ........................This exits the closed caption mode....](http://img.usermanuals.tech/thumb/54/100321/w300_projector_manual_9401_d-135.png "Page 136
121
[SEAMLESS SWITCHING]
When the input connector is switched, the image displayed before switching is held to switch to the new image without
a break due to absence of a signal.
Setting Closed Caption [CLOSED CAPTION]
This option sets several closed caption modes that allow text to be superimposed on the projected image of Video
or S-Video.
The subtitles and text will be displayed a short while after the on-screen menu disappears.
OFF ........................This exits the closed caption mode....")
121 [SEAMLESS SWITCHING] When the input connector is switched, the image displayed before switching is held to switch to the new image without a break due to absence of a signal. Setting Closed Caption [CLOSED CAPTION] This option sets several closed caption modes that allow text to be superimposed on the projected image of Video or S-Video. The subtitles and text will be displayed a short while after the on-screen menu disappears. OFF ........................This exits the closed caption mode....
Page 137
![Page 137
122
[POWER OPTIONS]
Selecting Power-saving in [STANDBY MODE]
Setting the power consumption in the standby mode.
NORMAL ................In the standby mode, the power consumption of the projector is minimized\
.
In the standby mode, the POWER indicator lights up in red while the STATUS indicator will go off.
• When set to [NORMAL], the following terminals and functions will be disabled. HDMI OUT terminals,
Ethernet/HDBaseT port, LAN function, mail notification function
HDBaseT STANDBY...](http://img.usermanuals.tech/thumb/54/100321/w300_projector_manual_9401_d-136.png "Page 137
122
[POWER OPTIONS]
Selecting Power-saving in [STANDBY MODE]
Setting the power consumption in the standby mode.
NORMAL ................In the standby mode, the power consumption of the projector is minimized\
.
In the standby mode, the POWER indicator lights up in red while the STATUS indicator will go off.
• When set to [NORMAL], the following terminals and functions will be disabled. HDMI OUT terminals,
Ethernet/HDBaseT port, LAN function, mail notification function
HDBaseT STANDBY...")
122 [POWER OPTIONS] Selecting Power-saving in [STANDBY MODE] Setting the power consumption in the standby mode. NORMAL ................In the standby mode, the power consumption of the projector is minimized\ . In the standby mode, the POWER indicator lights up in red while the STATUS indicator will go off. • When set to [NORMAL], the following terminals and functions will be disabled. HDMI OUT terminals, Ethernet/HDBaseT port, LAN function, mail notification function HDBaseT STANDBY...
Page 138
![Page 138
123
Turning On the Projector By Applying Computer Signal [AUTO POWER ON SELECT]
If set to [HDBaseT STANDBY], the projector automatically detects the synchronizing signal input from the following
selected terminals and projects the picture accordingly: Computer, HDMI, Displa yPort, HDBaseT , and SLO T.
OFF ........................AUTO POWER ON SELECT function will be switch off.
HDMI, DisplayPort, COMPUTER, HDBaseT, SLOT
..............................When a computer signal of a selected input terminal...](http://img.usermanuals.tech/thumb/54/100321/w300_projector_manual_9401_d-137.png "Page 138
123
Turning On the Projector By Applying Computer Signal [AUTO POWER ON SELECT]
If set to [HDBaseT STANDBY], the projector automatically detects the synchronizing signal input from the following
selected terminals and projects the picture accordingly: Computer, HDMI, Displa yPort, HDBaseT , and SLO T.
OFF ........................AUTO POWER ON SELECT function will be switch off.
HDMI, DisplayPort, COMPUTER, HDBaseT, SLOT
..............................When a computer signal of a selected input terminal...")
123 Turning On the Projector By Applying Computer Signal [AUTO POWER ON SELECT] If set to [HDBaseT STANDBY], the projector automatically detects the synchronizing signal input from the following selected terminals and projects the picture accordingly: Computer, HDMI, Displa yPort, HDBaseT , and SLO T. OFF ........................AUTO POWER ON SELECT function will be switch off. HDMI, DisplayPort, COMPUTER, HDBaseT, SLOT ..............................When a computer signal of a selected input terminal...
Page 139
![Page 139
124
Returning to Factory Default [RESET]
The RESET feature allows you to change adjustments and settings to the factory preset for a (all) source (s) except
the following:
[CURRENT SIGNAL]
Resets the adjustments for the current signal to the factory preset levels.
The items that can be reset are: [PRESET], [CONTRAST], [BRIGHTNESS], [COLOR], [HUE], [SHARPNESS], [AS-
PECT RATIO], [HORIZONTAL], [VERTICAL], [CLOCK], [PHASE], and [OVERSCAN].
[ALL DATA]
Reset all the adjustments and settings for all the...](http://img.usermanuals.tech/thumb/54/100321/w300_projector_manual_9401_d-138.png "Page 139
124
Returning to Factory Default [RESET]
The RESET feature allows you to change adjustments and settings to the factory preset for a (all) source (s) except
the following:
[CURRENT SIGNAL]
Resets the adjustments for the current signal to the factory preset levels.
The items that can be reset are: [PRESET], [CONTRAST], [BRIGHTNESS], [COLOR], [HUE], [SHARPNESS], [AS-
PECT RATIO], [HORIZONTAL], [VERTICAL], [CLOCK], [PHASE], and [OVERSCAN].
[ALL DATA]
Reset all the adjustments and settings for all the...")
124 Returning to Factory Default [RESET] The RESET feature allows you to change adjustments and settings to the factory preset for a (all) source (s) except the following: [CURRENT SIGNAL] Resets the adjustments for the current signal to the factory preset levels. The items that can be reset are: [PRESET], [CONTRAST], [BRIGHTNESS], [COLOR], [HUE], [SHARPNESS], [AS- PECT RATIO], [HORIZONTAL], [VERTICAL], [CLOCK], [PHASE], and [OVERSCAN]. [ALL DATA] Reset all the adjustments and settings for all the...
Page 140
![Page 140
125
❼ Menu Descriptions & Functions [INFO.]
Displays the status of the current signal and light module usage. This item has nine pages. The information included
is as follows:
TIP: Pressing the HELP button on the remote control will show the [INFO.] menu items.
[USAGE TIME]
[LIGHT HOURS USED] (H)
[FILTER HOURS USED] (H)
[TOTAL CARBON SAVINGS] (kg-CO2)
• [TOTAL CARBON SAVINGS]
This displays the estimated carbon saving information in kg. The carbon footpr int factor in the carbon saving cal-
culation...](http://img.usermanuals.tech/thumb/54/100321/w300_projector_manual_9401_d-139.png "Page 140
125
❼ Menu Descriptions & Functions [INFO.]
Displays the status of the current signal and light module usage. This item has nine pages. The information included
is as follows:
TIP: Pressing the HELP button on the remote control will show the [INFO.] menu items.
[USAGE TIME]
[LIGHT HOURS USED] (H)
[FILTER HOURS USED] (H)
[TOTAL CARBON SAVINGS] (kg-CO2)
• [TOTAL CARBON SAVINGS]
This displays the estimated carbon saving information in kg. The carbon footpr int factor in the carbon saving cal-
culation...")
125 ❼ Menu Descriptions & Functions [INFO.] Displays the status of the current signal and light module usage. This item has nine pages. The information included is as follows: TIP: Pressing the HELP button on the remote control will show the [INFO.] menu items. [USAGE TIME] [LIGHT HOURS USED] (H) [FILTER HOURS USED] (H) [TOTAL CARBON SAVINGS] (kg-CO2) • [TOTAL CARBON SAVINGS] This displays the estimated carbon saving information in kg. The carbon footpr int factor in the carbon saving cal- culation...