NEC Projector PH1202HL User Manual

156
9. Appendix
❶ Throw distance and screen size
Six	separate	bayonet	style	lenses	can	be	used	on	this	projector.	Refer	to	the	infor mation	on	this	page	and	use	a	lens	
suited	for	the	installation	environment	(screen	size	and	throw	distance).	For	installation	and	replacement	of	lens	units	
contact	your	dealer.
Each	number	provided	in	the	table	below	means	the	throw	distance	between	the	lens	surface	and	the	screen.
Lens types and throw distance
unit	=	m
Screen	sizeLens	model...

157
Projection	range	for	the	different	lenses
60-500
100-500100-500100-500
NP-9LS20ZM1 5.0–46.1 m
70-600
100-500
NP-9LS08ZM1 1.4–18.1 m
NP-9LS13ZM1 3.1–24.8 m
NP-9LS16ZM1 3.8–31.9 m
NP-9LS40ZM1 5.8–74.7 m
NP-9LS12ZM1 2.8–20.2 m
Tables of screen sizes and dimensions
Screen	heightScreen
	width
16:10	screen	size		
(diagonal)
Size	(inches)Screen	widthScreen	height(inches) (cm)(inches) (cm)
60 52132.8 2974.7
70 61155.0 3487.2
100 87221.4 49124.5
150 131332.1 74186.8
200 174442.8 98249.1
250 218553.5 123311.3...

158
Lens shifting range
This	projector	is	equipped	with	a	lens	shift	function	for	adjusting	the	position	of	the	projected	image	by	using	the	LENS	
SHIFT	buttons	(→	page	22).	The	lens	can	be	shifted	within	the	range	sho wn	belo w.
NOTE: 
•	 Please	do	not	use	the	lens	shift	function	when	projecting	portrait	images.	Please	use	it	with	the	lens	in	the	center.
Legend:	V	“Vertical”	refers	to	the	screen	height	and	H	“Horiz ontal”	refers	to	the	screen	width.	The	lens	shift	range	is	
expressed	as	a	ratio	of...

159
❷ Mounting the Optional Board (sold separately)
CAUTION
Before	mounting	or	removing	the	optional	board,	be	sure	to	turn	off	the	projector,	wait	for	the	fans	to	stop	and	turn	
off	the	main	power	switch.
Tool	needed:	Phillips	screwdriver	(plus-head)
1.	 Turn	off	the	main	power	switch	of	the	projector.
2.	 Loosen	the	two	screws	on	the	SLOT	cover	of	the	terminals.
	 Remove	the	two	screws	and	the	SLOT	cover.
NOTE:	Keep	the	two	screws	and	the	slot	cover.
3. Insert the optional board into the slot.
	 Make...

160
4.	 Tighten	the	two	screws	on	both	sides	of	the	slot.
•	 Be	sure	to	tighten	the	screws.
	 This	will	complete	installation	of	the	optional	board.
	 To	select	the	optional	board	source,	select	SLOT	as	the	input.
NOTE:
•	 Mounting	the	optional	board	may	cause	the	fans	to	run	in	the	standby	mode	for	the	purpose	of	cooling	depending	on	the	optional	
board.	The	fan	speed	may	also	increase	in	order	to	cool	the	projector	properly.	Both	of	these	instances	are	considered	normal	
and not a malfunction of the...

161
❸ Compatible Input Signal List
Analog Computer Signal
SignalResolution	(	dots	)Aspect	RatioRefresh	Rate	(	Hz	)VGA640×480 4:3 60/72/75/85/iMac
SVGA 800×600 4:3 56/60/72/75/85/iMac
XGA 1024×768 4:3 60/70/75/85/iMac
XGA+ 1152×864 4:3 60/70/75/85
WXGA 1280
×768 15:9 60
1280 ×800 16:10 60
1360 ×768 *
216:9 60
1366 ×768 *216:9 60
Quad-VGA 1280×960 4:3 60/75/85
SXGA 1280×1024 5:4 60/75/85
SXGA+ 1400×1050 4:3 60/75
WXGA+ 1440×900 16:10 60
WXGA++ 1600×900 16:9 60
UXGA 1600×1200 4:3 60/65/70/75
WSXGA+...

162
HDMI
SignalResolution	(	dots	)Aspect	RatioRefresh	Rate	(	Hz	)VGA640×480 4:3 60
SVGA 800×600 4:3 60
XGA 1024×768 4:3 60
HD 1280×720 16:9 60
WXGA 1280
×768 15:9 60
1280 ×800 16:10 60
1366 ×768 *
216:9 60
Quad-VGA 1280×960 4:3 60
SXGA 1280×1024 5:4 60
SXGA+ 1400×1050 4:3 60
WXGA+ 1440×900 16:10 60
WXGA++ 1600×900 16:9 60
WSXGA+ 1680×1050 16:10 60
UXGA 1600×1200 4:3 60
Full	HD1920×1080 *116:9 60
WUXGA 1920×1200 16:1060	(Reduced	Blanking)2K 2048×1080 17:9 60WQHD	 iMac	27"2560×1440 16:9 60
WQXGA...

163
DisplayPort
SignalResolution	(	dots	)Aspect	RatioRefresh	Rate	(	Hz	)VGA640×480 4:3 60
SVGA 800×600 4:3 60
XGA 1024×768 4:3 60
HD 1280×720 16:9 60
WXGA 1280
×768 15:9 60
1280 ×800 16:10 60
1366 ×768 *
216:9 60
Quad-VGA 1280×960 4:3 60
SXGA 1280×1024 5:4 60
SXGA+ 1400×1050 4:3 60
WXGA+ 1440×900 16:10 60
WXGA++ 1600×900 16:9 60
WSXGA+ 1680×1050 16:10 60
UXGA 1600×1200 4:3 60
Full	HD1920×1080 *116:9 60
WUXGA 1920×1200 16:1060	(Reduced	Blanking)2K 2048×1080 17:9 60WQHD	 iMac	27"2560×1440 16:9 60
WQXGA...

164
❹ Specifications
Model	namePH1202HL
Method3	chip	DMD	reflection	typeSpecifications	of	main	partsDMD	panelSize0.65"	(aspect	ratio:	16:10)Pixels	(*1)2,073,600	(1920	dots	×	1080	lines)Projection	lensesZoomPower	zoom	(zoom	range	depends	on	lens)FocusPower	focusLens	shiftingPower	lens	shiftLight	sourceLaser	DiodeOptical	device	Optical	isolation	by	dichroic	mirror,	combining	by	dichroic	prismLight	output	(*2) (*3)12,000	lmContrast	ratio	(*2)	(all	white/all	black)10,000:1	with	dynamic	contrastScreen...

165
Model	namePH1202HLEthernet/HDBaseT	portRJ-45	×	1,	Supports	BASE-TX3D	SYNC	output	terminal5	V	/	10	mA,	synchronized	signal	output	f or	3D	useControl	TerminalsRemote	terminalStereo	mini	jack	×	1RS-232C	terminal	(PC	control)D-Sub	9-pin	×	13D	terminalD-Sub	15-pin	×	1GP	I/O	terminalD-Sub	37-pin	×	1Usage	environmentOperating	temperature:	5	to	40°C	(*5)
Operating	humidity:	20	to	80%	(with	no	condensation)Storage	temperature:	-10	to	50°C	(*5)
Storage	humidity:	20	to	80%	(with	no	condensation)Operating...