NEC Projector PH1202HL User Manual

Projector
PH1202HL
User’s Manual
Model No.
NP-PH1202HL 

Ver. 1 3/15
•	 Apple,	Mac,	Mac	OS,	and	MacBook	are	trademarks	of	Apple	Inc.	registered	in	the	U.S.	and	other	countr ies.
•	 Microsoft,	Windows,	Windows	Vista,	Internet	Explorer,	.NET	Fr amework	and	Po werPoint	are	either	a	registered	
trademark	or	trademark	of	Microsoft	Corporation	in	the	United	States	and/or	other	countries.
•	 MicroSaver	is	a	registered	trademark	of	Kensington	Computer	Products	Group,	a	division	of	ACCO	Brands.
•	 Adobe,	Adobe	PDF,	Adobe	Reader,	and	Acrobat	are	either	registered...

i
Important Information
Safety Cautions
Precautions
Please	read	this	manual	carefully	before	using	your	NEC	projector	and	keep	the	manual	handy	for	future	reference.
CAUTION
To	turn	off	main	power,	be	sure	to	remove	the	plug	from	power	outlet.
The	power	outlet	socket	should	be	installed	as	near	to	the	equipment	as	possible ,	and	should	be	easily	
accessible.
CAUTION
TO	PREVENT	SHOCK,	DO	NOT	OPEN	THE	CABINET.
THERE	ARE	HIGH-VOLTAGE	COMPONENTS	INSIDE.
REFER	SERVICING	TO	QUALIFIED	SER VICE	PERSONNEL.
This...

ii
WARNING TO CALIFORNIA RESIDENTS:
Handling	the	cables	supplied	with	this	product	will	expose	you	to	lead,	a	chemical	known	to	the	State	of	California	
to	cause	birth	defects	or	other	reproductive	harm.	WASH	HANDS	AFTER	HANDLING.
For	UK	only:	In	UK,	a	BS	approved	pow er	cord	with	moulded	plug	has	a	Black	(five	Amps)	fuse	installed	for	use	with	
this	equipment.	If	a	power	cord	is	not	supplied	with	this	equipment	please	contact	y our	supplier .
Important Safeguards
These	safety	instructions	are	to	ensure...

iii
WARNING
•	 Do	not	cover	the	lens	with	the	lens	cap	or	equivalent	while	the	projector	is	on.	Doing	so	can	lead	to	melting	of	
the	cap	due	to	the	heat	emitted	from	the	light	output.
•	 Do	not	place	any	objects,	which	are	easily	affected	by	heat,	in	front	of	the	projector	lens.	Doing	so	could	lead	
to	the	object	melting	from	the	heat	that	is	emitted	from	the	light	output.	
Do	not	use	the	projector	with	it	leaning	to	the	left	and	right.	This	may	result	in	a	malfunction,	how ever,	portr ait	instal-...

iv
•	 Handle	the	power	cord	carefully.	A	damaged	or	frayed	po wer	cord	can	cause	electr ic	shoc k	or	fire .
-	 Do	not	use	any	power	cord	other	than	the	one	supplied	with	the	projector.
-	 Do	not	bend	or	tug	the	power	cord	excessively.
-	 Do	not	place	the	power	cord	under	the	projector,	or	any	heavy	object.
-	 Do	not	cover	the	power	cord	with	other	soft	materials	such	as	rugs.
-	 Do	not	heat	the	power	cord.
-	 Do	not	handle	the	power	plug	with	wet	hands.
•	 Turn	off	the	projector,	unplug	the	power	cord...

v
Remote Control Precautions
•	 Handle	the	remote	control	carefully.
•	 If	the	remote	control	gets	wet,	wipe	it	dry	immediately.
•	 Avoid	excessive	heat	and	humidity.
•	 Do	not	short,	heat,	or	take	apart	batteries.
•	 Do	not	throw	batteries	into	fire.
•	 If	you	will	not	be	using	the	remote	control	for	a	long	time,	remove	the	batteries.
•	 Ensure	that	you	have	the	batteries’	polarity	(+/−)	aligned	correctly .
•	 Do	not	use	new	and	old	batteries	together,	or	use	different	types	of	batteries	together.
•...

vi
•	 The	label	is	stuck	on	the	below	indicated	position.
 
Label
Important Information  

vii
About High Altitude mode
•	 Using	the	projector	at	highlands	can	shorten	the	life	of	optical	components	such	as	the	light	module.
About Copyright of original projected pictures:
Please	note	that	using	this	projector	for	the	purpose	of	commercial	gain	or	the	attraction	of	public	attention	in	a	venue	
such	as	a	coffee	shop	or	hotel	and	employing	compression	or	expansion	of	the	screen	image	with	the	following	func-
tions	may	raise	concern	about	the	infringement	of	copyrights	which	are	protected	by...

viii
 Health precautions to users viewing 3D images
Before	viewing,	be	sure	to	read	health	care	precautions	that	may	be	found	in	the	user’s	manual	included	with	your	3D	
eyeglasses	or	your	3D	compatible	content	such	as	Blu-ray	Discs,	video	games,	computer’s	video	files	and	the	like .
To	avoid	any	adverse	symptoms,	heed	the	following:
•	 Do	not	use	3D	eyeglasses	for	viewing	any	material	other	than	3D	images.
•	 Allow	a	distance	of	2	m/7	feet	or	greater	between	the	screen	and	a	user.	Viewing	3D	images	from...