NEC Projector PH1202HL User Manual
Here you can view all the pages of manual NEC Projector PH1202HL User Manual. The NEC manuals for Projector are available online for free. You can easily download all the documents as PDF.
Page 91
![Page 91
76
❸ Menu Descriptions & Functions [INPUT]
HDMI
This projects the video of the device connected to the HDMI IN terminal.
DisplayPort
This projects the video of the device connected to the Display Port IN terminal.
BNC
This projects the video of the device connected to the video input terminal.
(This projects the analog RGB signal or component signal.)
BNC(CV)
This projects the video of the device connected to the BNC (CV) video input terminal.
(This projects the composite video signal.)
BNC(Y/C)
This...](http://img.usermanuals.tech/thumb/54/100321/w300_projector_manual_9401_d-90.png "Page 91
76
❸ Menu Descriptions & Functions [INPUT]
HDMI
This projects the video of the device connected to the HDMI IN terminal.
DisplayPort
This projects the video of the device connected to the Display Port IN terminal.
BNC
This projects the video of the device connected to the video input terminal.
(This projects the analog RGB signal or component signal.)
BNC(CV)
This projects the video of the device connected to the BNC (CV) video input terminal.
(This projects the composite video signal.)
BNC(Y/C)
This...")
76 ❸ Menu Descriptions & Functions [INPUT] HDMI This projects the video of the device connected to the HDMI IN terminal. DisplayPort This projects the video of the device connected to the Display Port IN terminal. BNC This projects the video of the device connected to the video input terminal. (This projects the analog RGB signal or component signal.) BNC(CV) This projects the video of the device connected to the BNC (CV) video input terminal. (This projects the composite video signal.) BNC(Y/C) This...
Page 92
![Page 92
77
Using the Entry List
When you save [IMAGE OPTIONS] and [LENS MEMORY], the adjusted values of the signal are automatically sav ed to
the projector’s [ENTRY LIST]. When needed, the stored signal adjusted values can be accessed from the [ENTRY LIST].
However, only up to 100 patterns can be registered in the Entry List. When 100 patterns have been registered in the
Entry List, an error message is then displayed and no additional patterns can be registered. You should thus delete
(adjustment values of)...](http://img.usermanuals.tech/thumb/54/100321/w300_projector_manual_9401_d-91.png "Page 92
77
Using the Entry List
When you save [IMAGE OPTIONS] and [LENS MEMORY], the adjusted values of the signal are automatically sav ed to
the projector’s [ENTRY LIST]. When needed, the stored signal adjusted values can be accessed from the [ENTRY LIST].
However, only up to 100 patterns can be registered in the Entry List. When 100 patterns have been registered in the
Entry List, an error message is then displayed and no additional patterns can be registered. You should thus delete
(adjustment values of)...")
77 Using the Entry List When you save [IMAGE OPTIONS] and [LENS MEMORY], the adjusted values of the signal are automatically sav ed to the projector’s [ENTRY LIST]. When needed, the stored signal adjusted values can be accessed from the [ENTRY LIST]. However, only up to 100 patterns can be registered in the Entry List. When 100 patterns have been registered in the Entry List, an error message is then displayed and no additional patterns can be registered. You should thus delete (adjustment values of)...
Page 93
![Page 93
78
Entering the currently projected signal into the Entry List [STORE]
1. Press the ▲ or ▼ button to select any number.
2. Press the ◀ or ▶ button to select [STORE] and press the ENTER button.
Calling up a signal from the Entry List [LOAD]
Press the ▲ or ▼ button to select a signal and press the ENTER button.
Editing a signal from the Entry List [EDIT]
1. Press the ▲ or ▼ button to select a signal you wish to edit.
2. Press the ◀, ▶, ▲, or ▼ button to select [EDIT] and press the ENTER button.
The...](http://img.usermanuals.tech/thumb/54/100321/w300_projector_manual_9401_d-92.png "Page 93
78
Entering the currently projected signal into the Entry List [STORE]
1. Press the ▲ or ▼ button to select any number.
2. Press the ◀ or ▶ button to select [STORE] and press the ENTER button.
Calling up a signal from the Entry List [LOAD]
Press the ▲ or ▼ button to select a signal and press the ENTER button.
Editing a signal from the Entry List [EDIT]
1. Press the ▲ or ▼ button to select a signal you wish to edit.
2. Press the ◀, ▶, ▲, or ▼ button to select [EDIT] and press the ENTER button.
The...")
78 Entering the currently projected signal into the Entry List [STORE] 1. Press the ▲ or ▼ button to select any number. 2. Press the ◀ or ▶ button to select [STORE] and press the ENTER button. Calling up a signal from the Entry List [LOAD] Press the ▲ or ▼ button to select a signal and press the ENTER button. Editing a signal from the Entry List [EDIT] 1. Press the ▲ or ▼ button to select a signal you wish to edit. 2. Press the ◀, ▶, ▲, or ▼ button to select [EDIT] and press the ENTER button. The...
Page 94
![Page 94
79
Cutting a signal from the Entry List [CUT]
1. Press the ▲ or ▼ button to select a signal you wish to delete.
2. Press the ◀, ▶, ▲, or ▼ button to select [CUT] and press the ENTER button.
The signal will be deleted from the Entry List and the deleted signal will be displayed on the clipboard at the bottom
of the Entry List.
NOTE:
• The currently projected signal cannot be deleted.
• When the locked signal is selected, it will be displayed in gray which indicates it is not available.
TIP:
• Data...](http://img.usermanuals.tech/thumb/54/100321/w300_projector_manual_9401_d-93.png "Page 94
79
Cutting a signal from the Entry List [CUT]
1. Press the ▲ or ▼ button to select a signal you wish to delete.
2. Press the ◀, ▶, ▲, or ▼ button to select [CUT] and press the ENTER button.
The signal will be deleted from the Entry List and the deleted signal will be displayed on the clipboard at the bottom
of the Entry List.
NOTE:
• The currently projected signal cannot be deleted.
• When the locked signal is selected, it will be displayed in gray which indicates it is not available.
TIP:
• Data...")
79 Cutting a signal from the Entry List [CUT] 1. Press the ▲ or ▼ button to select a signal you wish to delete. 2. Press the ◀, ▶, ▲, or ▼ button to select [CUT] and press the ENTER button. The signal will be deleted from the Entry List and the deleted signal will be displayed on the clipboard at the bottom of the Entry List. NOTE: • The currently projected signal cannot be deleted. • When the locked signal is selected, it will be displayed in gray which indicates it is not available. TIP: • Data...
Page 95
![Page 95
80
❹ Menu Descriptions & Functions [ADJUST]
[PICTURE]
[MODE]
This function allows you to determine how to save settings for [DETAIL SETTINGS] of [PRESET] for each input.
STANDARD ............Saves settings for each item of [PRESET] (Preset 1 through 7)
PROFESSIONAL
.....Saves all the settings of [PICTURE] for each input.
NOTE:
• When [TEST PATTERN] is displayed, [MODE] cannot be selected.
[PRESET]
This function allows you to select optimized settings for your projected image.
You can adjust neutral...](http://img.usermanuals.tech/thumb/54/100321/w300_projector_manual_9401_d-94.png "Page 95
80
❹ Menu Descriptions & Functions [ADJUST]
[PICTURE]
[MODE]
This function allows you to determine how to save settings for [DETAIL SETTINGS] of [PRESET] for each input.
STANDARD ............Saves settings for each item of [PRESET] (Preset 1 through 7)
PROFESSIONAL
.....Saves all the settings of [PICTURE] for each input.
NOTE:
• When [TEST PATTERN] is displayed, [MODE] cannot be selected.
[PRESET]
This function allows you to select optimized settings for your projected image.
You can adjust neutral...")
80 ❹ Menu Descriptions & Functions [ADJUST] [PICTURE] [MODE] This function allows you to determine how to save settings for [DETAIL SETTINGS] of [PRESET] for each input. STANDARD ............Saves settings for each item of [PRESET] (Preset 1 through 7) PROFESSIONAL .....Saves all the settings of [PICTURE] for each input. NOTE: • When [TEST PATTERN] is displayed, [MODE] cannot be selected. [PRESET] This function allows you to select optimized settings for your projected image. You can adjust neutral...
Page 96
![Page 96
81
[DETAIL SETTINGS]
[GENERAL]
Storing Your Customized Settings [REFERENCE]
This function allows you to store your customized settings in [PRESET 1] to [PRESET 7].
First, select a base preset mode from [REFERENCE], then set [GAMMA CORRECTION] and [COLOR TEMPERATURE].
HIGH-BRIGHT ........Recommended for use in a brightly lit room.
PRESENTATION
.....Recommended for making a presentation using a PowerPoint file.
VIDEO
....................Recommended for typical TV program viewing.
MOVIE...](http://img.usermanuals.tech/thumb/54/100321/w300_projector_manual_9401_d-95.png "Page 96
81
[DETAIL SETTINGS]
[GENERAL]
Storing Your Customized Settings [REFERENCE]
This function allows you to store your customized settings in [PRESET 1] to [PRESET 7].
First, select a base preset mode from [REFERENCE], then set [GAMMA CORRECTION] and [COLOR TEMPERATURE].
HIGH-BRIGHT ........Recommended for use in a brightly lit room.
PRESENTATION
.....Recommended for making a presentation using a PowerPoint file.
VIDEO
....................Recommended for typical TV program viewing.
MOVIE...")
81 [DETAIL SETTINGS] [GENERAL] Storing Your Customized Settings [REFERENCE] This function allows you to store your customized settings in [PRESET 1] to [PRESET 7]. First, select a base preset mode from [REFERENCE], then set [GAMMA CORRECTION] and [COLOR TEMPERATURE]. HIGH-BRIGHT ........Recommended for use in a brightly lit room. PRESENTATION .....Recommended for making a presentation using a PowerPoint file. VIDEO ....................Recommended for typical TV program viewing. MOVIE...
Page 97
![Page 97
82
Adjusting Color Temperature [COLOR TEMPERATURE]
This option allows you to select the color temperature of your choice.
A value between 5000 K and 10500 K can be set in 100 K units.
NOTE: When [PRESENTATION] or [HIGH-BRIGHT] is selected in [REFERENCE], this function is not available.
Adjusting Brightness and Contrast [DYNAMIC CONTRAST]
Select [MOTION IMAGE] or [STILL IMAGE] depending on the picture you wish to project, and the contrast ration will
be adjusted to the optimum value.
NOTE:
• Depending...](http://img.usermanuals.tech/thumb/54/100321/w300_projector_manual_9401_d-96.png "Page 97
82
Adjusting Color Temperature [COLOR TEMPERATURE]
This option allows you to select the color temperature of your choice.
A value between 5000 K and 10500 K can be set in 100 K units.
NOTE: When [PRESENTATION] or [HIGH-BRIGHT] is selected in [REFERENCE], this function is not available.
Adjusting Brightness and Contrast [DYNAMIC CONTRAST]
Select [MOTION IMAGE] or [STILL IMAGE] depending on the picture you wish to project, and the contrast ration will
be adjusted to the optimum value.
NOTE:
• Depending...")
82 Adjusting Color Temperature [COLOR TEMPERATURE] This option allows you to select the color temperature of your choice. A value between 5000 K and 10500 K can be set in 100 K units. NOTE: When [PRESENTATION] or [HIGH-BRIGHT] is selected in [REFERENCE], this function is not available. Adjusting Brightness and Contrast [DYNAMIC CONTRAST] Select [MOTION IMAGE] or [STILL IMAGE] depending on the picture you wish to project, and the contrast ration will be adjusted to the optimum value. NOTE: • Depending...
Page 98
![Page 98
83
[HUE]
Varies the color level from +/− green to +/− blue. The red level is used as ref erence.
Input signalCONTRASTBRIGHTNESS SHARPNESS COLORHUE
RGB system of “COMPUTER/DisplayPort/HDMI/HDBaseT” Ye s
Ye sYe s NoNo
COMPONENT system of “COMPUTER/DisplayPort/HDMI/HDBaseT” Ye s
Ye sYe sYe sYe s
Composite Video/S-VideoYe sYe sYe sYe sYe s
Yes = Adjustable, No = Not adjustable
NOTE:
• When [TEST PATTERN] is displayed, [CONTRAST], [BRIGHTNESS], [SHARPNESS], [COLOR] and [HUE] cannot be adjusted.
[RESET]
The...](http://img.usermanuals.tech/thumb/54/100321/w300_projector_manual_9401_d-97.png "Page 98
83
[HUE]
Varies the color level from +/− green to +/− blue. The red level is used as ref erence.
Input signalCONTRASTBRIGHTNESS SHARPNESS COLORHUE
RGB system of “COMPUTER/DisplayPort/HDMI/HDBaseT” Ye s
Ye sYe s NoNo
COMPONENT system of “COMPUTER/DisplayPort/HDMI/HDBaseT” Ye s
Ye sYe sYe sYe s
Composite Video/S-VideoYe sYe sYe sYe sYe s
Yes = Adjustable, No = Not adjustable
NOTE:
• When [TEST PATTERN] is displayed, [CONTRAST], [BRIGHTNESS], [SHARPNESS], [COLOR] and [HUE] cannot be adjusted.
[RESET]
The...")
83 [HUE] Varies the color level from +/− green to +/− blue. The red level is used as ref erence. Input signalCONTRASTBRIGHTNESS SHARPNESS COLORHUE RGB system of “COMPUTER/DisplayPort/HDMI/HDBaseT” Ye s Ye sYe s NoNo COMPONENT system of “COMPUTER/DisplayPort/HDMI/HDBaseT” Ye s Ye sYe sYe sYe s Composite Video/S-VideoYe sYe sYe sYe sYe s Yes = Adjustable, No = Not adjustable NOTE: • When [TEST PATTERN] is displayed, [CONTRAST], [BRIGHTNESS], [SHARPNESS], [COLOR] and [HUE] cannot be adjusted. [RESET] The...
Page 99
![Page 99
84
[IMAGE OPTIONS]
Adjusting Clock and Phase [CLOCK/PHASE]
This allows you to manually adjust CLOCK and PHASE.
CLOCK ...................Use this item to fine tune the computer image or to remove any vertical banding that might appear. This
function adjusts the clock frequencies that eliminate the horizontal ban\
ding in the image.
This adjustment may be necessary when you connect your computer for the first time.
PHASE ...................Use this item to adjust the clock phase or to reduce video noise,...](http://img.usermanuals.tech/thumb/54/100321/w300_projector_manual_9401_d-98.png "Page 99
84
[IMAGE OPTIONS]
Adjusting Clock and Phase [CLOCK/PHASE]
This allows you to manually adjust CLOCK and PHASE.
CLOCK ...................Use this item to fine tune the computer image or to remove any vertical banding that might appear. This
function adjusts the clock frequencies that eliminate the horizontal ban\
ding in the image.
This adjustment may be necessary when you connect your computer for the first time.
PHASE ...................Use this item to adjust the clock phase or to reduce video noise,...")
84 [IMAGE OPTIONS] Adjusting Clock and Phase [CLOCK/PHASE] This allows you to manually adjust CLOCK and PHASE. CLOCK ...................Use this item to fine tune the computer image or to remove any vertical banding that might appear. This function adjusts the clock frequencies that eliminate the horizontal ban\ ding in the image. This adjustment may be necessary when you connect your computer for the first time. PHASE ...................Use this item to adjust the clock phase or to reduce video noise,...
Page 100
![Page 100
85
Adjusting Horizontal/Vertical Position [HORIZONTAL/VERTICAL]
Adjusts the image location horizontally and vertically.
• An image can be distorted during the adjustment of [CLOCK] and [PHASE]. This is not malfunction.
• The adjustments for [CLOCK], [PHASE], [HORIZONTAL], and [VERTICAL] will be stored in memory for the
current signal. The next time you project the signal with the same resolution, horizontal and ver tical frequency,
its adjustments will be called up and applied.
To delete...](http://img.usermanuals.tech/thumb/54/100321/w300_projector_manual_9401_d-99.png "Page 100
85
Adjusting Horizontal/Vertical Position [HORIZONTAL/VERTICAL]
Adjusts the image location horizontally and vertically.
• An image can be distorted during the adjustment of [CLOCK] and [PHASE]. This is not malfunction.
• The adjustments for [CLOCK], [PHASE], [HORIZONTAL], and [VERTICAL] will be stored in memory for the
current signal. The next time you project the signal with the same resolution, horizontal and ver tical frequency,
its adjustments will be called up and applied.
To delete...")
85 Adjusting Horizontal/Vertical Position [HORIZONTAL/VERTICAL] Adjusts the image location horizontally and vertically. • An image can be distorted during the adjustment of [CLOCK] and [PHASE]. This is not malfunction. • The adjustments for [CLOCK], [PHASE], [HORIZONTAL], and [VERTICAL] will be stored in memory for the current signal. The next time you project the signal with the same resolution, horizontal and ver tical frequency, its adjustments will be called up and applied. To delete...