NEC Plasmasync 50xm5 Users Manual

En-40
Table of Signals Supported
Screen modeDots 
 lines
640
400
720
400
640
480
720
400
848
480
852
480*
1
800
600
1024
768
1152
864
1280
768
1280
768*
9
1280
800*9
1280
854*9
1280
960
1360
765
1360
768
1376
768
1280
1024
1680
1050*
9
1600
1200
1920
1200*
9
1920
1200RB*9
640
480
832
624
1024
768
1152
870
1440
900*
9
1280
1024
1280
1024
1152
900
1280
1024Vertical
frequency
(Hz)
70.1
70.1
59.9
72.8
75.0
85.0
100.4
120.4
85.1
60.0
60.0
56.3
60.3
72.2
75.0
85.1
99.8
120.0
60.0
70.1
75.0
85.0
100.6
75.0...

En-41
Dots 
 lines
1024
768
1280
1024
768
576
640
480
1152
864
1400
1050Vertical
frequency
(Hz)
60.0
60.0
50.0
59.9
60.0
72.0
60.0
75.0
85.0Horizontal
frequency
(kHz)
49.7
63.9
31.4
31.5
53.7
64.9
65.3
82.3
93.9NORMAL
(4:3)
YES
YES*
4
YES*7
YES*7
YES
YES
YES
YES
YESFULL
(16:9)
YES*
3
YES
YES*
7
YES*7
YES
YES
YES
YES
YES
RGB
select*5
– –
– –
– –
640
480
1152
864
– –
– –
– –
– –
Horizontal
– –
– –
NEG
NEG
POS
POS
NEG
NEG
NEGSignal TypeVertical
– –
– –
NEG
NEG
NEG
NEG
POS
POS
POS   Sync Polarity
  Presence...

En-42
Supported resolution (50XM5/61XM4)• When the screen mode is NORMAL, each signal is converted to a 1024 dots
768 lines signal. (Except for *2, 3, 4)
• When the screen mode is TRUE, the picture is displayed in the original resolution.
• When the screen mode is FULL, each signal is converted to a 1365 dots
768 lines signal. (Except for *
3)Computer input signals supported by this system
  Screen modeDots 
 lines
640
400
720
400
640
480
720
400
848
480
852
480*
1
800
600
1024
768
1152
864
1280
768...

En-43
*1 Only when using a graphic accelerator board that is capable of displaying 852
480.
*2 This signal is converted to a 1024 dots
640 lines signal.
*3 The picture is displayed in the original resolution.
*4 The aspect ratio is 5:4. This signal is converted to a 960 dots
768 lines signal.
*5 Normally the RGB select mode suite for the input signals is set automatically. If the picture is not displayed properly, set the
RGB mode prepared for the input signals listed in the table above.
*6 To connect...

En-44
Specifications
Screen Size36.3(H)
20.3(V) inches
922(H)
515(V) mm
diagonal 42
Aspect Ratio16 : 9
Resolution1024(H)
768(V) pixels
Pixel Pitch0.036(H)
0.027(V) inches
0.9(H)
0.671(V) mm
Color Processing4,096 steps, 68.7 billion colors
Signals
Synchronization RangeHorizontal : 15.5 to 110.0 kHz
(automatic : step scan)
Vertical : 50.0 to 120.0 Hz
(automatic : step scan)
Input SignalsRGB, NTSC (3.58/4.43), PAL (B,G,M,N),
PAL60, SECAM, HD*1 , DVD*1 , DTV*1
Input Terminals (VIDEO1 and RGB1 can also be...

En-45
Specifications
Units are in inch
(mm)
3.8
(96) 1.5
(38)2.3
(58)
48.1 (1222)
30 (736)
43.5 (1106)
24.5 (622)
Screen Size43.5(H)
24.5(V) inches
1106(H)
622(V) mm
diagonal 50
Aspect Ratio16 : 9
Resolution1365(H)
768(V) pixels
Pixel Pitch0.032(H)
0.032(V) inches
0.81(H)
0.81(V) mm
Color Processing4,096 steps, 68.7 billion colors
Signals
Synchronization RangeHorizontal : 15.5 to 110.0 kHz
(automatic : step scan)
Vertical : 50.0 to 120.0 Hz
(automatic : step scan)
Input SignalsRGB, NTSC (3.58/4.43), PAL...

En-46
Specifications
Screen Size53.2(H)
29.9(V) inches
1351(H)
760(V) mm
diagonal 61
Aspect Ratio16 : 9
Resolution1365(H)
768(V) pixels
Pixel Pitch0.039(H)
0.039(V) inches
0.99(H)
0.99(V) mm
Color Processing4,096 steps, 68.7 billion colors
Signals
Synchronization RangeHorizontal : 15.5 to 110.0 kHz
(automatic : step scan)
Vertical : 50.0 to 120.0 Hz
(automatic : step scan)
Input SignalsRGB, NTSC (3.58/4.43), PAL (B,G,M,N),
PAL60, SECAM, HD*1 , DVD*1 , DTV*1
Input Terminals (VIDEO1 and RGB1 can also be...

En-47
NEC Solutions, Inc. (hereinafter NEC Solutions) warrants
this product to be free from defects in material and
workmanship under the following terms and, subject to
the conditions set forth below, agrees to repair or replace
(at NEC Solutions’ sole option) any part of the enclosed
unit which proves defective. Replacement parts or products
may be new or refurbished and will meet specifications of
the original parts or products.
HOW LONG IS THE WARRANTY?
Parts and labor are warranted for (1) one year...

FRANÇAIS
Manuel d’utilisation
(Modèle à découpe d’image
avancée)
 

Fr-2
Précaution
Veuillez lire avec attention ce manuel avant d’utiliser le moniteur à plasma
et le conserver accessible pour s’y référer ultérieurement.
  ATTENTION..
RISQUE D’ELECTROCUTION
NE PAS OUVRIR
ATTENTION:
POUR EVITER TOUT RISQUE D’ELECTROCUTION,
NE PAS OUVRIR LE BOITIER. A L’INTERIEUR,
AUCUNE PIECE NE NECESSITE L’INTER-VENTION
DE L’UTILISATEUR. EN CAS DE PROBLEME,
S’ADRESSER A UN REPARATEUR SPECIALISTE.
Ce symbole est une mise en garde contre les risques
d’électrocution que présentent certaines...