NEC Plasmasync 50xm5 Users Manual
Here you can view all the pages of manual NEC Plasmasync 50xm5 Users Manual. The NEC manuals for Television are available online for free. You can easily download all the documents as PDF.
Page 1
PlasmaSync Plasma Monitor NEC Solutions (America), Inc. User’s Manual Manuel d’utilisation Manual del Usuario Manual de Usuário User’s Manual PlasmaSync ™ 42XM4 PX-42XM4A PlasmaSync ™ 50XM5 PX-50XM5A PlasmaSync ™ 61XM4 PX-61XM4A
Page 2
ENGLISH User’s Manual (Enhanced split screen Model)
Page 3
En-2
Precautions
Please read this manual carefully before using your plasma monitor and
keep the manual handy for future reference.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION:
TO REDUCE THE RISK OF ELECTRIC SHOCK, DO
NOT REMOVE COVER. NO USER-SERVICEABLE
PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE
PERSONNEL.
This symbol warns the user that uninsulated voltage
within the unit may have sufficient magnitude to cause
electric shock. Therefore, it is dangerous to make any
kind of contact...
Page 4
En-3 NOTE: When you connect a computer to this monitor, use an RGB cable including the ferrite core on both ends of the cable. And regarding power cable, attach the supplied ferrite cores. If you do not do this, this monitor will not conform to mandatory FCC standards. Set the ferrite cores on both ends of the power cable (supplied). Use the band to fasten the ferrite core (supplied) to the power cable. Powercable(supplied) corecore bandband Warning Not for use in a computer room as defined in the...
Page 5
En-4 Contents Contents of the Package Plasma monitor Power cord Remote control with two AAA Batteries Manuals (Start up Guide and CD-ROM) Ferrite cores Cable clamps Options • Wall mount unit • Ceiling mount unit • Tilt mount unit • Tabletop Stand • Attachable speakers Important Information.................................. En-2 Contents...................................................... En-4 Contents of the Package........................................En-4...
Page 6
En-5 50mm (2) 50mm (2) 50 mm (2) Wall Wall 50mm (2) 50mm (2) You can attach your optional mounts or stand to the plasma monitor in one of the following two ways: * While it is upright. (See Drawing A) * As it is laid down with the screen face down (See Drawing B). Lay the protective sheet, which was wrapped around the monitor when it was packaged, beneath the screen surface so as not to scratch the screen face. * Do not touch or hold the screen face when carrying the unit. • This device cannot be...
Page 7
En-6 Back of the unit mounting holes Back of the unit mounting holes Note: 1. The VIDEO1 and RGB1 terminals can be used for either INPUT or OUTPUT. When LOOP OUT is ON, do not connect an OUTPUT signal from another unit as it may damage the other unit due to an extraordinary load. 2. LOOP OUT can not be turned ON while signals are input to the RGB1 terminal. 3. LOOP OUT can be turned ON while signals are input to the RGB1 terminal if the POWER is switched ON. Information • To loop signals out to another...
Page 8
En-7
MENU/ ENTERINPUT SELECT
DOWN UP LEFT/-RIGHT/+
/ EXITVOLUME
MENU/ ENTERINPUT SELECT
DOWN UP LEFT/-RIGHT/+
/ EXITVOLUME
Top side
Bottom side 90°
: RGB
: RGB
: AUTO
: 1080B
: OFF
: OFF
1024768
EXITSEL.
RETURNMENU/ENTEROK
OPTION1
OSM
BNC INPUT
D-SUB INPUT
RGB SELECT
HD SELECT
INPUT SKIP
ALL RESET
Caution when placing the plasma monitor in portrait mode
•Use the optional unit. Contact your store of purchase when installing.
•Rotate 90° clockwise as seen from the front when installing....
Page 9
En-8 qPower Turns the monitor’s power on and off. wRemote sensor window Receives the signals from the remote control. ePOWER/STANDBY indicator When the power is on ............................. Lights green. When the power is in the standby mode ... Lights red. rINPUT SELECT / EXIT Switches the input. Functions as the EXIT buttons in the On-Screen Menu (OSM) mode. Front View MENU/ ENTERINPUT SELECT DOWN UP LEFT/-RIGHT/+ / EXIT VOLUME MENU/ ENTERINPUT SELECT DOWN UP LEFT/-RIGHT/+ / EXIT VOLUME 4567132...
Page 10
En-9 AAC IN Connect the included power cord here. BEXT SPEAKER L and R Connect speakers (optional) here. Maintain the correct polarity. Connect the (positive) speaker wire to the EXT SPEAKER terminal and the (negative) speaker wire to the EXT SPEAKER terminal on both LEFT and RIGHT channels. Please refer to your speaker’s owner’s manual. CVIDEO1, 2, 3 (BNC, RCA, S-Video) Connect VCR’s, DVD’s or Video Cameras, etc. here. VIDEO1 can be used for Input or Output. DAUDIO1, AUDIO2, AUDIO3 These are audio...