NEC Plasmasync 50xm5 Users Manual

En-30
“SINGLE”, “SIDE BY SIDE1~3” and “PICTURE
IN PICTURE (BOTTOM LEFT~TOP LEFT)”.
•Use the 
 and  buttons to select “MAIN”/ “SUB”
and “LEFT”/“RIGHT”, then use the 
 and  buttons
to choose from “VIDEO1~3”, “HD/DVD1~2” and
“RGB/PC1~3”.
SEL. RETURN
PROGRAM TIMER
EXIT
ZOOMADJ.
DATE
MON
TUE
SAT
*FRI
—
SAT
*INPUT
MULTI
—
VIDEO1
HD/DVD1
—
VIDEO1
RGB1FUNCTION
INVERSE
—
WHITE
—
—
WHITE
— ON
08 : 30
- - : - -
 08 : 30
08 : 30
- - : - -
 08 : 30
15 : 30
OFF
10 : 30
18 : 15
12 : 15
10 : 00
- - : - -
 12 : 15
16...

En-31
Enabling/disabling remote control wireless
transmission
This function enables/disables remote control wireless
transmission.
Example: Setting “OFF”
On “IR REMOTE” of “OPTION3” menu, select “OFF”, then
press the MENU/ENTER button.
SEL. ADJ. RETURN
OPTION 3 3 / 4
      PREVIOUS PAGE
TIMER
PWR. ON MODE
CONTROL LOCK
IR REMOTE
LOOP OUT 
REMOTE ID
ID NUMBER
VIDEO WALL
      NEXT PAGE:   OFF 
:   OFF 
:   OFF
:   ALL
:   ALL
EXIT
Information

 IR REMOTE settings
ON: Enables remote control wireless...

En-32
VIDEO WALL POSITION
Set the position of each display.
Example: Setting “4”
On “VIDEO WALL” menu, select “POSITION”, then press
the MENU/ENTER button.
The “VIDEO WALL POSITION” screen appears.
Select “NO. 4” of “POSITION NO.”.
ADJ. RETURN
VIDEO WALL POSITION 
POSITION NO.   4
EXIT
NO. 1
NO. 2
NO. 4
NO. 3NO. 7NO. 8NO. 9
NO. 10NO. 11NO. 12
NO. 13NO. 14NO. 15
AUTO ID
This feature automatically sets the ID numbers of multiple
displays connected to each other.
Example: Setting “ON”
Set the ID number for...

En-33
PLE LINK
Use this function to set a uniform brightness for each
display.
Turn on the AUTO ID and set the DIVIDER (at 1, 4 or 9)
before the following operations.
Example: Setting “ON”
On “PLE LINK” of “VIDEO WALL” menu, select “ON”,
then press the MENU/ENTER button.
SEL. ADJ. RETURN
VIDEO WALL
DIVIDER
POSITION
DISP. MODE
AUTO ID
IMAGE ADJUST
P. ON DELAY
PLE LINK
REPEAT TIMER:   1 
:   SPLIT 
:   OFF 
:   OFF 
:   ON
:   OFF
EXIT
Information

 PLE LINK settings
ON: Sets a uniform brightness for each...

En-34
Option4 Settings Menu
Set “ADVANCED OSM” to “ON” in the MAIN MENU.
Removing the sub screen area when there is
no input signal detected for the sub picture
This function automatically removes the black frame of
the sub screen when there is no sub screen input signal.
This feature is available only when the picuture-in-picuture
mode is selected.
Example: Setting “DISPLAY” to “FADE”
On “SUB. PICTURE” of “OPTION4” menu, press the
MENU/ENTER button.
The “SUB. PICTURE” screen appears.
Adjust the items....

En-35
Switching the input source quickly
This feature enables quick input selection.
After setting ON, press the CLEAR/SEAMLESS SW
button for quick switching between the two selected input
signals.
Example: Set to switch quickly between RGB1 and
RGB2.
On “SEAMLESS SW” of “OPTION4” menu, select “ON”.
Select “RGB1” and “RGB2”.
SEL. ADJ. RETURN
OPTION 4 4 / 4
      PREVIOUS PAGE
SUB. PICTURE
ZOOM NAV
PIC FREEZE
SEAMLESS SW
  SELECT1
  SELECT2 
TEXT INSERT:   BTM LFT 
:   S BY S1
:   ON
:   RGB1 
:   RGB2 
:...

En-36
Displaying the information as a text
Example: Setting “TEXT INSERT” to “BOTTOM”,
“INPUT” to “RGB1”, “PIC. RATE” to “100%” and
“DISPLAY” to “NORMAL”
On “TEXT INSERT” of “OPTION4” menu, select
“BOTTOM”, then press the MENU/ENTER button.
The “TEXT INSERT” screen appears.
Adjust the items.
Information

 TEXT INSERT setting
OFF: Displays no text.
TOP/MID HIGH/MID LOW/BOTTOM: Displays a
text at the specified location.

 INPUT setting
Sets the input of the text to the RGB1 to 3.

 PIC. RATE setting
Sets...

En-37
Color System Settings Menu
Setting the video signal format
Use these operations to set the color systems of composite
video signals or Y/C input signals.
Example: Setting the color system to “3.58 NTSC”
On the MAIN MENU, select “COLOR SYSTEM”, then press
the MENU/ENTER button.
The “COLOR SYSTEM” screen appears.
On “COLOR SYSTEM”, select “ 3.58NTSC ”.
RETURN
COLOR SYSTEM
COLOR SYSTEM
:   3.58NTSC 
EXITADJ.
Information

 Video signal formats
Different countries use different formats for video...

En-38
Application
These specifications cover the communications control of
the plasma monitor by external equipment.
Connections
Connections are made as described below.
Connector on the plasma monitor side: EXTERNAL
CONTROL connector.
Use a crossed (reverse) cable.
Type of connector: D-Sub 9-pin male
DisplayExternal equipment
e.g., Personal computer
External Control Codes (Reference)
FUNCTION CODE DATA
Power ON 9FH 80H 60H 4EH 00H CDH
OFF 9FH 80H 60H 4FH 00H CEH
Input Switch Video1 (BNC) DFH 80H 60H 47H...

En-39
Troubleshooting
Remedy
• If there are no abnormalities in the image and sound,
the noise is caused by the cabinet reacting to
changes in temperature. This will not affect
performance.
• Leave some space between the display and the
connected components.
• Replace both batteries with new ones.
• Set IR REMOTE OFF on OPTION3 menu.
• Set an ID number with the ID SELECT button, or set
the ID number to ALL.
• Plug the monitor’s power cord into a power outlet.
• Press the power button on the monitor to...