NEC Np1150 Lcd Projector Users Manual

8
6. Using On-Screen Menu
[VIDEO]
Using Noise Reduction [NOISE REDUCTION]
This function is used to reduce video noise.RANDOM.NR
.......... Reduces.flickering.random.noise.in.an.image..
MOSQUITO.NR
....... Reduces.mosquito.noise.that.appears.around.the.edges.of.an.image.during.DVD.playback.
BLOCK.NR
.............. Reduces.block.noise.or.mosaic-like.patterns.by.selecting.ON.
Selecting Interlaced progressive Conversion process mode [DEINTERLACE]
This function allows you to select an...

88
6. Using On-Screen Menu
[SOUND]
Controlling Sound [VOLUmE/B ASS/TREBLE/B ALANCE]
Adjusts  the  volume,  bass  and  treble  level,  left  and  right  balance  of  the  projector  speaker  and  AUDIO  OUT  (Stereo 
Mini Jack).
Enabling 3D Surround [ 3D SURROUND]
Turn on or off the 3D surround effect.
If the AUDIO OUT stereo mini jack of the projector is connected to external equipment, adjusting the sound on the 
external  equipment  can  cause  sound  to  be  distorted  or  cracked,  depending  on...

89
6. Using On-Screen Menu
 Menu Descriptions & Functions [SETUP]
[BASIC]
Selecting Keystone mode [KEYSTONE]
This feature allows you to correct keystone distortion.
Selecting this item will display the Keystone setting menu.
You can correct vertical distortion manually from the menu. (→ page 30)
Changes will be saved even when you turn off the projector.
NOTE: When [CORNERSTONE] is selected, [KEYSTONE] is not available. 

90
6. Using On-Screen Menu
Selecting Cornerstone mode [CORNERSTONE]
 
This option allows you to correct trapezoidal distortion.
Selecting this item will display the Cornerstone adjustment screen. (→ page 40)
NOTE: When [KEYSTONE] is selected, [CORNERSTONE] is not available.
Using the pIp Function
This function allows you to view two different signals simultaneously.
PIP POSITION: 
This option allows you to select the position of a sub picture in the main picture.
The options are: top-left, top-right,...

9
6. Using On-Screen Menu
Using the Wall Color Correction [WALL COLOR]
 
This function allows for quick adaptive color correction in applications where the screen material is not white.
The following nine options are available.
Setting Lamp mode to Normal or Eco [ LAmp mODE]
This feature enables you to select two brightness modes of the lamp: Normal and Eco modes. The lamp life can be 
extended by using the Eco mode. Selecting Eco mode decreases fan noise when compared to Normal mode.
Lamp Mode...

9
6. Using On-Screen Menu
Using Off Timer [OFF TImER]
1. Select your desired time between 30 minutes and 16 hours:  OFF, 0:30, 1:00, 2:00, 4:00, 8:00, 12:00, 16:00.
2.  Press the ENTER button on the remote control.
3.  The remaining time starts counting down.
4.  The projector will turn off after the countdown is complete.
NOTE:
•  To cancel the preset time, set [ OFF
] for the preset time or turn off the power.
•  When the remaining time reaches 3 minutes before the projector is turned off, the...

93
6. Using On-Screen Menu
Setting a new program timer
1. On the PROGRAM TIMER screen, use the SELECT  or  button to select [SETTINGS] and press the EN-
TER button.
The [PROGRAM LIST] screen will be displayed.
NOTE: When the Program Timer is turned on, the [PROGRAM LIST] cannot be edited.
2. Select a blank program number and press the ENTER button.
The [EDIT] screen will be displayed.
3. Make settings for each item as required....

94
6. Using On-Screen Menu
4. Select [OK] and press the ENTER button. 
This will complete the settings. 
You will be returned to the [PROGRAM LIST] screen.
NOTE: 
• 
Up to 30 different timer settings can be programmed.
• 
When [PROGRAM TIMER] is turned on, the [STANDBY MODE] setting is ignored.
•  The Program Timer is executed on a set time basis, not in a program basis.
• 
Once the program not marked with a check in [REPEAT] has been executed, the check mark in the [ACTIVE] check box will be 
cleared...

95
6. Using On-Screen Menu
Deleting the programs
1.  On  the  [PROGRAM  LIST]  screen,  select  a  program  number  you  want  to  delete  and  press  the  SELECT  
button.
2. Press the SELECT  button to select [DELETE].
3. Press the ENTER button.
The confirmation screen will be displayed.
4. Select [YES] and press the ENTER button.  
 
The program will be deleted.
This will complete deleting the program.
Using [CORNERSTONE]
(→ page 40)
Using [ENTRY LIST]
(→ page 77)
Setting the Current Date and Time...

9
6. Using On-Screen Menu
Logging Off Your projector [LOGOFF]
This feature allows you to log off your projector without turning it off.
Logging off your projector will prevent an unauthorized user from operating your projector.
To log off your projector, follow the steps below.
1. Press the MENU button and use the SELECT 
 button to highlight [SETUP].
 
2.   Use the SELECT  or the ENTER button to highlight [BASIC].
 
3. Use the SELECT  button to highlight [LOGOFF], and press the ENTER button....