NEC Np1150 Lcd Projector Users Manual


6. Using On-Screen Menu
[ENTRY LIST]
Using the Entry List
When any source adjustments are made, the adjustments are automatically registered in the Entry List. The (adjust-
ment values of) registered signals can be loaded from the Entry List whenever necessary.
However, only up to 100 patterns can be registered in the Entry List. When 100 patterns have been registered in the  
Entry List, an error message is then displayed and no additional patterns can be registered. You should thus delete...

8
.
Source	NaMe:
Enter.a.signal.name..Up.to.18.alphanumeric.characters.can.be.used.
INput	terMINal:
Change.the.input.terminal.
lock:
Set.so.that. the.selected. signal.cannot. be.deleted. when.[ALL. DELETE ].is. executed.. After.executing. [LOCK ],.
the.changes.cannot.be.saved.
SkIp:
Set.so.that.the.selected.signal.will.be.skipped.during.auto.search.
When.complete,.select.OK.and.press.ENTER..To.exit.without.storing.the.setting,.select.Cancel..Select.
[ SOURCE.NAME...

9
6. Using On-Screen Menu
 Menu Descriptions & Functions [ADJUST]
[PICTURE]
[mODE]
This function allows you to determine how to save settings for [DETAIL SETTINGS] of [PRESET] for each input.
STANDARD............. Saves.settings.for.each.item.of.[ PRESET].(Preset.1.through.6)
PROFESSIONAL......Saves.all.the.settings.of.[ PICTURE].for.each.input..
[pRESET]
This option allows you to adjust neutral tint for yellow, cyan or magenta. There are six factory presets optimized for 
various types of images,...

80
6. Using On-Screen Menu
[DETAIL SETTINGS]
This will provide you with three pages of menus that provide more detailed settings.
[GENERAL]
Selecting Reference Setting [ REFERENCE]
This feature allows you to use color correction or gamma values as reference data to optimize for various types 
of images. You can select one of the following six settings.
HIGH-BRIGHT
..... Recommended.for.use.in.a.brightly.lit.room.
PRESENTATION
.. Recommended.for.making.a.presentation.using.a.PowerPoint.file.
VIDEO...

8
6. Using On-Screen Menu
[CONTRAST]
Adjusts the intensity of the image according to the incoming signal.
[BRIGhTNESS]
Adjusts the brightness level or the back raster intensity.
[ShARpNESS]
Controls the detail of the image for Video (not valid for RGB and digital signals).
[COLOR]
Increases or decreases the color saturation level (not valid for RGB and digital signals).
[hUE]
Varies  the  color  level  from  +/-  green  to  +/-blue. The  red  level  is  used  as  reference. This  adjustment  is...

8
6. Using On-Screen Menu
[IMAGE OPTIONS]
Adjusting Clock and phase [CLOCK/phASE]
This allows you to manually adjust  CLOCK and PHASE.
CLOCK.................... Use.this.item. to.fine. tune. the.computer. image.or.to.remove. any.vertical. banding. that.might. appear.. This.
function.adjusts.the.clock.frequencies.that.eliminate.the.horizontal.banding.in.the.image.
This.adjustment.may.be.necessary.when.you.connect.your.computer.for.the.first.time.
PHASE.................... Use.this.item. to.adjust....

83
6. Using On-Screen Menu
Adjusting horizontal/Vertical p osition [hORIZONTAL/VERTICAL pOSITION
]
Adjusts the image location horizontally and vertically.
Selecting Overscan p ercentage [OVERSCAN]
Select overscan percentage (0%, 5% and 10%) for signal.
Projected image
Overscaned by 10%
NOTE: When [NATIVE] is selected in [RESOLUTION], [OVERSCAN] is not available. 

84
6. Using On-Screen Menu
Selecting Aspect Ratio [ASpECT RATIO]
.Screen.Type.4:3.SCREEN.(VIDEO). Screen.Type.WIDE.SCREEN.(VIDEO). RGB
   
Aspect Ratio allows you to select the best Aspect mode to display your source image.
When screen type 4:3 SCREEN is selected for the source, the following selections will display:
For VIDEO
4:3..........................Standard.4:3.aspect
LETTERBOX
............ Reduced.to.display.the.true.aspect.with.black.borders.on.top.and.bottom
WIDE.SCREEN
...........

85
6. Using On-Screen Menu
[NP3150/NP2150/NP1150]
VIDEO
4:3 FILL
ZOOM
SQUEEZE
LETTERBOX
LETTERBOX
LETTERBOX
4:3 WINDOW
4:3
4:3
WIDE SCREEN
WIDE SCREEN
INPUTSIGNAL
ASPECT RATIO
4:3 SCREEN
ASPECT RATIO
WIDE SCREEN
RGB
ASPECT RATIO 
ASPECT RATIO 
WIDE SCREEN 
4:3 SCREEN 
4:3 
4:3 
4:3 
16:9 
16:9 
INPUTSIGNAL5:4 
5:4 
16:9 15:9 
15:9 
15:9 5:4 
16:10 
16:10 
16:10 
[NP3151W]
VIDEO
ASPECT RATIO
4:3 SCREEN
ZOOM
SQUEEZE
4:3
LETTERBOX
LETTERBOX4:3
4:34:3
WIDE SCREEN
INPUTSIGNAL
ASPECT RATIO
WIDE SCREEN...

86
6. Using On-Screen Menu
RGBINPUTSIGNAL
ASPECT RATIO
ASPECT RATIO
WIDE SCREEN
4:3 SCREEN
4:3
4:3
4:3
16:9
16:9
5:4
5:4
16:915:9
15:9
15:95:4
16:10
16:10
16:10
Selecting Resolution [RESOLUTION]
[AUTO]:	 Displays	 an 	 RGB 	 signal 	 to 	 fit 	 the 	 screen 	 in 	 the 	 projector’s 	 native 	 resolution 	 (NP3150/NP2150/NP1150: 	
1024 	 x 	 768 	 pixels/NP3151W: 	 1280 	 x 	 800 	 pixels).
[NATIVE]:	 Displays
	 an 	 RGB 	 signal 	 in 	 its 	 true 	 resolution.
Example:	 When
	 a 	 source 	 with 	 800...