NEC Np1150 Lcd Projector Users Manual

0
[pROJECTOR NAmE]
Specify a unique projector name. Press  to display the software keyboard and type in. Up to 16 alphanumeric 
characters, signs and symbols can be used. After entering a name, select [OK] and press the ENTER button.
NOTE: The [PROJECTOR NAME] will not be affected even when [RESET] is don\
e from the menu.
Using Software Keyboard
1.to.0.and
Characters........ Use.to.type.in.password.or.keyword.
MODE........................

08
6. Using On-Screen Menu
[WIRED]
Profiles (for LAN port [RJ-45]):
Up to two settings for the LAN port (RJ-45) can be stored in memory of the projector.
Select [PROFILE 1] or [PROFILE 2] and then do settings for [DHCP] and the other options. 
After doing this, select [OK] and press the ENTER button. This will store your settings in memory.
To recall the settings from memory:
After selecting the [WIRED] tab, select the [PROFILE 1] or [PROFILE 2] from the [PROFILES] list.
Select [OK] and press the...

09
6. Using On-Screen Menu
[WIRELESS]
PROFILES (for USB Wireless LAN unit):
To execute a wireless LAN easily using Image Express Utility 2.0, select [EASY CONNECTION].
Up to two settings for the USB wireless LAN unit can be stored in memory of the projector.
Select [PROFILE 1] or [PROFILE 2] and then do settings for [DHCP] and the other options. 
After doing this, select [OK] and press the ENTER button. This will store your settings in memory.
To recall the settings from memory:
After selecting the...

0
6. Using On-Screen Menu
[ADVANCED] menu
[CONNECTION] (required for wireless only)
SITE SURVEY:
Displays a list of available SSIDs for wireless LAN on site. Select an SSID which you can access.
To select an SSID, highlight [SSID] and use the SELECT  to select [OK] and press the ENTER button.
 : Wireless access point
 : Ad Hoc PC
 : WEP or WPA enabled
SSID (Network name):
Enter  an  identifier  (SSID)  for  wireless  LAN  when  selecting  [ INFRASTRUCTURE]  or  [AD  HOC]  in  [NETWORK 
TYPE]....


6. Using On-Screen Menu
[SECURITY] (required for wireless only)
SECURITY TYpE
Select encryption mode for secure transmission.
When [WEP] or [DISABLE] is selected in [SECURITY TYPE]:
Select  this  option  whether  using  the WEP  (Wired  Equivalent  Privacy)  key  for  encryption  or  not. To  use  encryp-
tion, specify WEP key.DISABLE
................. Will.not.turn.on.the.encryption.feature..y our.communications.may.be.monitored.by.someone....


6. Using On-Screen Menu
Using Software Keyboard to enter an encryption key1.  Select one of [ KEY 1
], [KEY 2], [KEY 3] and [ KEY 4] and press the ENTER button.
  The software keyboard will be displayed.
 
2. Use the SELECT   button to select one key and press the ENTER button.
3.  After finishing entering the WEP key, use the SELECT 
 button to select [OK] and press the EN-
TER button.
  The software keyboard will disappear.
When [WPA-PSK] or [WPA2-PSK] is selected in [SECURITY...

3
6. Using On-Screen Menu
[mAIL]
ALERT MAIL:
Checking this box enables Alert Mail feature.
This option notifies your computer of an error message via e-mail when using wireless or wired LAN. The error 
message will be notified when the projector lamp has reached the end of its usable life or an error occurs in the 
projector.
Sample of a message sent from the projector:the lamp is at the end of its usable life. Please replace the lamp.
Projector name: X X X X
lamp hours Used: xxxx [h]
SENDER’S...

4
6. Using On-Screen Menu
Selecting Communication Speed [COmmUNICATION SpEED]
This feature sets the baud rate of the PC Control port (D-Sub 9 Pin). It supports data rates from 4800 to 38400 bps. 
The  default  is  38400  bps.  Select  the  appropriate  baud  rate  for  your  equipment  to  be  connected  (depending  on  the 
equipment, a lower baud rate may be recommended for long cable runs).
Your selected communication speed will not be affected even when [ RESET] is done from the menu....

5
6. Using On-Screen Menu
[OPTIONS]
Setting Auto Adjust [AUTO ADJUST]
This feature sets the Auto Adjust mode so that the RGB image can be automatically or manually adjusted for noise 
and stability. You can automatically make adjustment in two ways: [ NORMAL] and [FINE].
OFF
......................... The.RGB.image.will.not.be.automatically.adjusted.
you.can.manually.optimize.the.RGB.image.
NORMAL
....................

116
6. Using On-Screen Menu
Selecting Default Source [Default Source Select]
You can set the projector to default to any one of its inputs each time the projector is turned on.
Last.......................s ets . the . projector . to . default . to . the . previous . or . last . active . input . each . time . the . projector . is . turned . on.
a
uto
...................... s earches . for . an . active . source . in . order . of . Computer1 .→. Computer2 .→. Computer3 .→. Component .
→. Video .→.s -Video...