NEC Np1150 Lcd Projector Users Manual

							
LCD Projector
NP3150/NP2150/NP1150 
NP3151W
User’s Manual 
						

							
© NEC Display Solutions, Ltd. 2007–2008
4th edition, February 2008
Information on USB Wireless LAN:
The NP3150/NP2150/NP1150/NP3151W series projectors distributed in some areas and countries do not come 
standard with the USB Wireless LAN Unit.
If  you  purchase  the  projector  without  the  USB Wireless  LAN  Unit  installed  and  need  to  present  to  the  projector 
via a wireless connection, the optional USB Wireless LAN Unit must be installed.
The model without the USB wireless unit has a dummy cover.
•
  IBM is a trademark or registered trademark of International Business Machines Corporation.
•
  Macintosh, Mac OS X and PowerBook are trademarks of Apple Inc., registered in the U.S. and other countries.
•
  Microsoft, Windows and PowerPoint are trademarks or registered trademarks of Microsoft Corporation. 
•
 
Windows Vista is either a registered trademark or trademark of Microsoft Corporation in the United States and/or 
other countries.
•
 
VESA is a registered trademark of Video Electronics Standards Association.
•
 
All  Rights  Reserved.  Corel,  the  Corel  logo,  Ulead,  the  Ulead  logo,  Ulead  Photo  Explorer,  InterVideo,  the  Inter-
Video logo, are trademarks or registered trademarks of Corel Corporation and/or its subsidiaries.
•
 
HQV is a registered trademark of Silicon Optix Inc.
•
 
Trademark  PJLink  is  a  trademark  applied  for  trademark  rights  in  Japan,  the  United  States  of  America  and  other 
countries and areas.
•
 
Other  product  and  company  names  mentioned  in  this  user’s  manual  may  be  the  trademarks  or  registered  trade
-
marks of their respective holders.
NOTES
(1)   The contents of this guide may not be reprinted in part or whole without permission.
(2)   The contents of this guide are subject to change without notice.
(3)
  Great  care  has  been  taken  in  the  preparation  of  this  manual;  however,  should  you  notice  any  questionable 
points, errors or omissions, please contact us.
(4)
 
Notwithstanding article (3), NEC will not be responsible for any claims on loss of profit or other matters deemed 
to result from using the Projector. 
						

							
i
Important Information
Safety Cautions
Precautions
Please  read  this  manual  carefully  before  using  your  NEC  NP3150/NP2150/NP1150/NP3151W  projector  and  keep 
the manual handy for future reference. Your serial number is located on the bottom of your projector. Record it here:
CAUTION
To turn off main power, be sure to remove the plug from power outlet.
The power outlet socket should be installed as near to the equipment as possible, and should be easily 
accessible.
CAUTION
TO PREVENT SHOCK, DO NOT OPEN THE CABINET.
THERE ARE HIGH-VOLTAGE COMPONENTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
This  symbol  warns  the  user  that  uninsulated  voltage  within  the  unit  may  be  sufficient  to  cause  electrical 
shock. Therefore, it is dangerous to make any kind of contact with any part inside of the unit.
This symbol alerts the user that important information concerning the operation and maintenance of this 
unit has been provided.
The information should be read carefully to avoid problems.
WARNING: TO PREVENT FIRE OR SHOCK, DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE.
DO  NOT  USE  THIS  UNIT’S  PLUG  WITH  AN  EXTENSION  CORD  OR  IN  AN  OUTLET  UNLESS  ALL  THE 
PRONGS CAN BE FULLY INSERTED.
DOC Compliance Notice (for Canada only)
This Class B digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regulations.
Acoustic Noise Information Ordinance-3. GSGV (for Germany only):
The sound pressure level is less than 70 dB (A) according to ISO 3744 or ISO 7779.
WARNING TO CALIFORNIA RESIDENTS:
Handling the cables supplied with this product will expose you to lead, a chemical known to the State of Califor-
nia to cause birth defects or other reproductive harm. Wash hands after handling.
CAUTION
Use of controls or adjustments or performance of procedures other than those specified herein may re-
sult in hazardous radiation exposure.
CAUTION
Do not look into the laser pointer while it is on and do not point the laser beam at a person. Serious in-
jury could result.
CAUTION
Avoid displaying stationary images for a prolonged period of time.
Doing so can result in these images being temporarily sustained on the surface of the LCD panel.
If  this  should  happen,  continue  to  use  your  projector. The  static  background  from  previous  images  will 
disappear.
This label is on the side of the remote control.This mark is on the top of the remote control. 
						

							
ii
Important Information
EU-wide  legislation  as  implemented  in  each  Member  State  requires  that  used  electrical  and  electronic 
products carrying the mark (left) must be disposed of separately from normal household waste. This in-
cludes projectors and their electrical accessories or lamps. When you dispose of such products, please 
follow the guidance of your local authority and/or ask the shop where you purchased the product.
After collecting the used products, they are reused and recycled in a proper way. This effort will help us 
reduce  the  wastes  as  well  as  the  negative  impact  such  as  mercury  contained  in  a  lamp  to  the  human 
health and the environment at the minimum level.
The mark on the electrical and electronic products only applies to the current European Union Member 
States.
Disposing of your used product 
						

							
iii
Important Information
RF Interference (for USA only)
WARNING
The  Federal  Communications  Commission  does  not  allow  any  modifications  or  changes  to  the  unit  EXCEPT 
those specified by NEC Display Solutions of America, Inc. in this manual. Failure to comply with this government 
regulation could void your right to operate this equipment. This equipment has been tested and found to comply 
with  the  limits  for  a  Class  B  digital  device,  pursuant  to  Part  15  of  the  FCC  Rules. These  limits  are  designed  to 
provide reasonable protection against harmful interference in a residential installation. This equipment generates, 
uses,  and  can  radiate  radio  frequency  energy  and,  if  not  installed  and  used  in  accordance  with  the  instructions, 
may  cause  harmful  interference  to  radio  communications.  However,  there  is  no  guarantee  that  interference  will 
not occur in a particular installation.
If  this  equipment  does  cause  harmful  interference  to  radio  or  television  reception,  which  can  be  determined  by 
turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the 
following measures:• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio / TV technician for help.
For  UK  only:  In  UK,  a  BS  approved  power  cable  with  moulded  plug  has  a  Black  (five  Amps)  fuse  installed  for  use 
with this equipment. If a power cable is not supplied with this equipment please contact your supplier.
Important Safeguards
These  safety  instructions  are  to  ensure  the  long  life  of  your  projector  and  to  prevent  fire  and  shock.  Please  read 
them carefully and heed all warnings.
Installation
• Do not place the projector in the following conditions: - on an unstable cart, stand, or table.
-  near water, baths or damp rooms.
-  in direct sunlight, near heaters or heat radiating appliances.
-  in a dusty, smoky or steamy environment. 
-  on a sheet of paper or cloth, rugs or carpets.
• If you wish to have the projector installed on the ceiling:
- Do not attempt to install the projector yourself.
-  The  projector  must  be  installed  by  qualified  technicians  in  order  to  ensure  proper  operation  and  reduce  the 
risk of bodily injury.
-  In  addition,  the  ceiling  must  be  strong  enough  to  support  the  projector  and  the  installation  must  be  in  accor
-
dance with any local building codes.
-  Please consult your dealer for more information.
10
Place the projector in a horizontal position
The tilt angle of the projector should not exceed 10 degrees, nor should the projector be installed in any way other 
than the desktop and ceiling mount, otherwise lamp life could decrease dramatically. 
						

							
iv
Important Information
Fire and Shock Precautions
• Ensure  that  there  is  sufficient  ventilation  and  that  vents  are  unobstructed  to  prevent  the  build-up  of  heat  inside 
your projector. Allow at least 4 inches (10cm) of space between your projector and a wall.
•  Do not try to touch the ventilation outlet on the left front (when seen from the front) as it can become heated while 
the projector is turned on.
•  Prevent  foreign  objects  such  as  paper  clips  and  bits  of  paper  from  falling  into  your  projector.  Do  not  attempt  to 
retrieve  any  objects  that  might  fall  into  your  projector.  Do  not  insert  any  metal  objects  such  as  a  wire  or  screw-
driver into your project. If something should fall into your projector, disconnect it immediately and have the object 
removed by a qualified service personnel.
•  Do not place any objects on top of the projector.
•  Do not touch the power plug during a thunderstorm. Doing so can cause electrical shock or fire.
•  The projector is designed to operate on a power supply of 100-240V AC 50/60 Hz. Ensure that your power supply 
fits this requirement before attempting to use your projector.
•  Do not look into the lens while the projector is on. Serious damage to your eyes could result.
•  Keep any items such as magnifying glass out of the light path of the projector. The light being projected from the 
lens is extensive, therefore any kind of abnormal objects that can redirect light coming out of the lens, can cause 
unpredictable outcome such as fire or injury to the eyes.
•  Do not cover the lens with the black lens cap or equivalent while the projector is on. Doing so can lead to melting 
of the cap and possibly burning your hands due to the heat emitted from the light output.
•  Do  not  place  any  objects,  which  are  easily  affected  by  heat,  in  front  of  the  projector  lens  or  a  projector  exhaust 
vent.
  Doing so could lead to the object melting or getting your hands burned from the heat that is emitted from the light 
output and exhaust.
•  Handle the power cable carefully. A damaged or frayed power cable can cause electric shock or fire.
- Do not use any power cables than the supplied one.   
-  Do not bend or tug the power cable excessively.
-  Do not place the power cable under the projector, or any heavy object.
-  Do not cover the power cable with other soft materials such as rugs.
-  Do not heat the power cable.
-  Do not handle the power plug with wet hands.
•  Turn  off  the  projector,  unplug  the  power  cable  and  have  the  projector  serviced  by  a  qualified  service  personnel 
under the following conditions:
- When the power cable or plug is damaged or frayed.
-  If liquid has been spilled into the projector, or if it has been exposed to rain or water. 
-  If the projector does not operate normally when you follow the instructions described in this user’s manual.
-  If the projector has been dropped or the cabinet has been damaged.
-  If the projector exhibits a distinct change in performance, indicating a need for service.
•  Disconnect the power cable and any other cables before carrying the projector
•  Turn off the projector and unplug the power cable before cleaning the cabinet or replacing the lamp.
•  Turn off the projector and unplug the power cable if the projector is not to be used for an extended period of time.
•  When using a LAN cable:
  For safety, do not connect to the connector for peripheral device wiring that might have excessive voltage. 
						

							
v
Caution on Handling the Optional Lens
When shipping the projector with the optional lens, remove the optional lens before shipping the projector. The lens 
and the lens shift mechanism may encounter damage caused by improper handling during transportation. 
Do not hold the lens part when carrying the projector.
Doing so could cause the focus ring to rotate, resulting in accidental dropping of the projector.
Lamp Replacement
• To replace the lamp, follow all instructions provided on page 124.
•  Be sure to replace the lamp when the message 
[ThE  LAmp hAS  REAChED ThE END  OF ITS  USABLE  LIFE. 
pLEASE  REpLACE  ThE LAmp
.] appears. If you continue to use the lamp after the lamp has reached the end 
of its usable life, the lamp bulb may shatter, and pieces of glass may be scattered in the lamp case. Do not touch 
them as the pieces of glass may cause injury.
  If this happens, contact your dealer for lamp replacement.
A Lamp Characteristic
The projector has a high-pressure mercury lamp as a light source.
A lamp has a characteristic that its brightness gradually decreases with age. Also repeatedly turning the lamp on 
and off will increase the possibility of its lower brightness.
CAUTION:
When  removing  the  lamp  from  a  ceiling-mounted  projector,  make  sure  that  no  one  is  under  the  projector.  Glass 
fragments could fall if the lamp has been burned out.
Important Information
Remote Control Precautions
• Handle the remote control carefully.
•  If the remote control gets wet, wipe it dry immediately.
•  Avoid excessive heat and humidity.
•  Do not heat, take apart, or throw batteries into fire.
•  If you will not be using the remote control for a long time, remove the batteries.
•  Ensure that you have the batteries’ polarity (+/–) aligned correctly.
•  Do not use new and old batteries together, or use different types of batteries together.
•  Dispose of used batteries according to your local regulations.
CAUTION
• 
Always carry your projector by the carrying handle. Before doing so, be sure to lock the carrying handle in place.
 To lock the carrying handle, see “To lock the carrying handle” on page 6.
•  Do  not  use  the  tilt-foot  for  purposes  other  than  originally  intended.  Misuses  such  as  using  the  tilt  foot  to  carry 
or hang (from the wall or ceiling) the projector can cause damage to the projector.
•  Do not send the projector in a soft case by parcel delivery service or cargo shipment. The projector inside the 
soft case could be damaged.
•  Select  [ HIGH
]  in  Fan  mode  if  you  continue  to  use  the  projector  for  consecutive  days.  (From  the  menu,  select 
[SETUP - OPTIONS] → [ FAN MODE] → [ HIGH].)
•  Before  using  Direct  Power  Off,  be  sure  to  allow  at  least  20  minutes  immediately  after  turning  on  the  projector 
and starting to display an image. 
•  Do not unplug the power cable from the wall outlet or projector when the projector is powered on. Doing so can 
cause damage to the AC IN connector of the projector and (or) the prong plug of the power cable.
  To  turn  off  the  AC  power  supply  when  the  projector  is  powered  on,  use  a  power  strip  equipped  with  a  switch 
and a breaker.
•  The projector can be unplugged during its cool down period after it is turned off. 
  Do  not  try  to  touch  the  ventilation  outlet  on  the  left  front  (when  seen  from  the  front)  as  it  can  become  heated 
while the projector is turned on and immediately after the projector is turned off.
•  Do  not  turn  off  the  AC  power  for  60  seconds  after  the  lamp  is  turned  on  and  while  the  POWER  indicator  is 
blinking green. Doing so could cause premature lamp failure. 
						

							
vi
Important Information
About High Altitude mode
•  Set  [FAN  MODE]  to  [HIGH  ALTITUDE]  when  using  the  projector  at  altitudes  approximately  5500  feet/1600  me-
ters or higher.
  Using  the  projector  at  altitudes  approximately  5500  feet/1600  meters  or  higher  without  setting  to  [HIGH  ALTI
-
TUDE]  can  cause  the  projector  to  overheat  and  the  protector  could  shut  down.  If  this  happens,  wait  a  couple 
minutes and turn on the projector.
•   Using the projector at altitudes less than approximately 5500 feet/1600 meters and setting to [ HIGH ALTITUDE
] 
can cause the lamp to overcool, causing the image to flicker. Switch [FAN MODE] to [AUTO].
•   Using  the  projector  at  altitudes  approximately  5500  feet/1600  meters  or  higher  can  shorten  the  life  of  optical 
components such as the lamp.
USB Wireless LAN Unit
Cautions on Usage
 Warning
•  The USB Wireless LAN Unit
 is not meant for use with facilities or equipment involving the safeguard of 
human life, such as medical equipment, nuclear facilities or equipment, aeronautical or space equipment, 
transportation facilities or equipment, etc., or with facilities or equipment requiring high levels of reliability. Do 
not use the USB Wireless LAN Unit in such cases. 
• 
Do not use the USB Wireless LAN Unit near cardiac pacemakers. 
• 
Do not use the USB Wireless LAN Unit near medical equipment. Doing so may cause electromagnetic inter-
ference with the medical equipment, possible leading to death. 
• 
Do not disassemble or modify the USB Wireless LAN Unit in any way. Doing so could lead to fire or electric 
shock. 
• 
Do not use the USB Wireless LAN Unit in wet or moist places, such as in bathrooms or near humidifiers. Do-
ing so could lead to fire, electric shock or malfunction.
 
 Caution
To prevent damage due to static electricity, eliminate any static electricity from your body before touching the 
USB Wireless LAN Unit. 
•  Static electricity from the human body may damage the USB Wireless LAN Unit. Before touching the USB 
Wireless LAN Unit, touch an aluminum sash, a door knob, or some other metal object around you to elimi-
nate the static electricity.
 Caution
The radio waves used by the USB Wireless LAN Unit pass through the wood or glass used in normal homes 
(but not through window panes with built-in metallic mesh).
The radio waves do not pass through iron reinforcing bars, metal or concrete, however, so the USB Wireless 
LAN Unit cannot be used for communicating through walls or floors made with these materials.  
						

							
vii
FCC Compliance 
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:(1) this 
device  may  not  cause  harmful  interference  and  (2)  this  device  must  accept  any  interference  received,  including 
interference that may cause undesired operation. 
This equipment has been tested and found to comply with the limits for a Class B Personal Computer and Peripher-
al, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harm-
ful interference in a residential installation.
This  equipment  generates,  uses  and  can  radiate  radio  frequency  energy  and,  if  not  installed  and  used  in  accor-
dance with the instructions, may cause harmful interference to radio communications.
However,  there  is  no  guarantee  that  interference  will  not  occur  in  a  particular  installation.  If  this  equipment  does 
cause  harmful  interference  to  radio  or  television  reception,  which  can  be  determined  by  turning  the  equipment  off 
and on, the user is encouraged to try to correct the interference by one or more of the following measures: •  Reorient or relocate the receiving antenna. 
•   Increase the separation between the equipment and receiver. 
•   Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. 
•   Consult the dealer or an experienced radio/TV technician for help. 
This equipment has been tested to comply with the limits for a Class B personal computer and peripheral, pursuant 
to  Subpart  B  of  Part  15  of  FCC  Rules.  Only  peripherals  (computer  input/output  devices,  terminals,  printers,  etc.) 
certified  (DoC)  or  verified  to  comply  with  Class  B  limits  may  be  attached  to  this  equipment.  Operation  with  non-
certified  (DoC)  or  non-verified  personal  computer  and/or  peripherals  is  likely  to  result  in  Interference  to  radio  and 
TV reception. 
The connection of a unshielded equipment interface cable to this equipment will invalidate the FCC Certification of 
this device and may cause interference levels which Exceed the limits established by FCC for equipment. 
You  are  cautioned  that  changes  or  modifications  not  expressly  approved  by  the  party  responsible  for  compliance 
could void your authority to operate the equipment. 
Regulatory Information/Disclaimers
Installation  and  use  of  this Wireless  LAN  device  must  be  in  strict  accordance  with  the  instructions  included  in  the 
user documentation provided with the product. Any changes or modifications (including the antennas) made to this 
device that are not expressly approved by the manufacturer may void the user’s authority to operate the equipment. 
The manufacturer is not responsible for any radio or television interference caused by unauthorized modification of 
this  device,  or  the  substitution  of  the  connecting  cables  and  equipment  other  than  manufacturer  specified.  It  is  the 
responsibility  of  the  user  to  correct  any  interference  caused  by  such  unauthorized  modification,  substitution  or  at-
tachment.  Manufacturer  and  its  authorized  resellers  or  distributors  will  assume  no  liability  for  any  damage  or  viola-
tion of government regulations arising from failing to comply with these guidelines.
CAUTION
To  comply  with  FCC  RF  exposure  compliance  requirements,  the  antenna  used  for  this  transmitter  must  be  in-
stalled  to  provide  a  separation  distance  of  at  least  7.87"/20cm  from  all  persons  and  must  not  be  co-located  or 
operating in conjunction with any other antenna or transmitter.
SAR  compliance  has  been  established  in  typical  laptop  computer(s)  with  USB  slot,  and  product  could  be  used  in 
typical  laptop  computer  with  USB  slot.  Other  application  like  handheld  PC  or  similar  device  has  not  been  verified 
and may not compliance with related RF exposure rule and such use shall be prohibited.
Important Information 
						

							
viii
Usage restrictions in North America
The following channels can be used indoors only.•  In the United States and Canada: 36, 40, 44, and 48 channels
•   In Mexico: 149, 153, 157, 161, and 165 channels
The other channels can be used both indoors and outdoors.
This Class B digital apparatus complies with Canadian RSS-210.
Cet appareil numerique de la Classe B est conforme a la norme CNR-210 du Canada.
To  comply  with  Canada  RSS-210(Issue  7)  section  A9.4(b)(ii);  this  radio  product  will  not  transmit  on  any  channels 
operating  in  the  exclusion  band  of  5600  -  5650MHz.  All  channels  in  the  5600  -  5650MHz  band  will  be  disabled  by 
factory firmware and is not user changeable.
Regulatory Statement:
Operation of this device is subjected to the following National regulations and may be prohibited to use if certain re-
striction should be applied. 
France:
Outdoor  use  limited  to  10mW  e.i.r.p.  within  the  band  2454  –  2483.5  MHz.  Derogation  in  French  overseas  depart-
ments of Guyane and La Reunion: outdoor use not allowed in band 2400 - 2420 MHz.
Hereby,  NEC  Display  Solutions,  Ltd.  declares  that  this  USB Wireless  LAN  Unit  (Model:  NP01LM)  is  in  compliance 
with the essential requirements and other relevant provisions of Directive 1999/5/EC.
Cautions on security when using wireless LAN products 
With  a  wireless  LAN,  radio  waves  are  used  instead  of  LAN  cables  for  the  exchange  of  data  between  the  wireless 
access  points  (computers,  etc.),  offering  the  advantage  that  LAN  connections  can  be  made  freely  within  the  range 
of the radio waves.
On the other hand, the radio waves reach all points within this range, regardless of walls or other obstacles, possi-
bly resulting in the problems described below if the proper security measures are not taken. 
•   Contents of transmissions may be intercepted 
Malicious third parties may purposely intercept the radio waves and steal information contained in the transmis
-
sions,  including  such  personal  information  as  ID  numbers,  passwords,  credit  card  numbers,  e-mail  messages, 
etc. 
•   Improper intrusions 
Malicious  third  parties  may  without  permission  access  the  personal  or  company  network  and  steal  personal  or 
confidential information, pretend to be someone else and leak incorrect information, rewrite information that has 
been intercepted, introduce computer viruses or otherwise damage data or the system, etc. 
Wireless  LAN  cards  and  wireless  access  points  generally  include  security  measures  for  dealing  with  these  prob-
lems. Making the proper security settings before using the products can reduce the risk of such problems arising. 
We recommend that you fully understand the problems that can arise when using the products without making the 
security settings, then that you make the security settings based on your own decision and at your own discretion. 
Operation  of  the  USB Wireless  LAN  Unit  is  subjected  to  the  regulations  of  the  countries  listed  below,  and  may  be 
prohibited  to  use  outside  the  country  where  you  purchased.  If  you  need  to  use  the  projector  outside  the  country 
where you purchased, you must remove the USB Wireless LAN Unit from the projector before exporting.
Important Information