NEC Np1150 Lcd Projector Users Manual

4
4. Convenient Features
8. Enter an alphanumeric keyword using the Software keyboard.
  For example, to enter “1234”, follow the steps 8-1 to 8-4 below.
 
NOTE: 
•  When using your USB mouse, click each number or alphabet.
 
BS: Delete the character before the cursor or highlight. 
: Confirm the keyword and close the Software keyboard.
• The keyword must be 1 to 10 characters long.
• Please make a note of your keyword.
enter a keyword by using the remote control.
8-1.  Press the MenU button and...

48
4. Convenient Features
10. Press the SELECT  button to highlight [OK] and press the ENTER button.
  The confirmation screen will be displayed.
 
11. Press the SELECT  or  button to highlight [YES] and press the ENTER button.
  The Security Function will take effect when the projector is turned on next time.
Checking If Security is enabled
Turn off the projector and turn it back on to check if the Security function is enabled.
1. Press the POWER (ON/STANDBY) button.
  the [POWer Off / are YOU...

49
Disabling the Security
1. Press the MENU button.
  the menu will be displayed.
NOTE: Immediately after the projector has been turned on and the “Projector is locked! Enter your keyword.” message is dis-
played at the bottom of the screen, pressing the MENU button will display the Keyword entry will be displayed. At this time, 
pressing the MENU button will display the menu.
2.  Press the SELECT 
 button to highlight [ SETUP] and press the ENTER button.
  the page tab [ BasiC
] will be highlighted....

50
4. Convenient Features
 Limiting Access Level to Available Menu Items
The Account function allows you to manage available menu items by user level.
The projector has two menu modes: the ADVANCED menu and the BASIC menu.ADVANCED.menu
...This.is.the.menu.that.contains.all.the.available.menus.and.commands..Users.with.an.ADMINISTRATOR.or.
ADVANCED.account.can.access.the.ADVANCED.menu.
BASIC.menu
........... This.is.the. basic. menu. that.contains. minimum. essentials. of.menus. and.commands.....

5
4. Convenient Features
Creating or Adding a User
1.  From the menu, select [SETUP] → [INSTALLATION] → [SECURITY SETTINGS].
2.   Select [ACCOUNT]-[SETTINGS].
  the [a CCOUnt] setting screen will be displayed.
 
3.  Select [CREATE].
  the [a CCOUnt] create screen will be displayed.
 
4. Enter a user name, user type, and password.
•  A user name must be 16 alphanumeric characters or less (case sensitive).
•  User type has two options: [ADVANCED] and [BASIC].
•  Use the software keyboard to enter a...

5
4. Convenient Features
Editing a User (Changing Account Settings)
1.  From the menu, select [SETUP] → [INSTALLATION] → [SECURITY SETTINGS].
NOTE: A user with an ADMINISTRATOR account is recommended to change the account settings.
2.  Select [ACCOUNT]-[SETTINGS].
  the [a CCOUnt] setting screen will be displayed.
3.  Select a user name you wish to edit.
4.   Select [EDIT].
  the [edit] screen will be displayed.
  enter your password and press the enter button.
  if no password is set, simply press...

53
L Operation Using an HTTP Browser
Overview
The  use  of  HTTP  server  functions  will  allow  control  of  the  projector  from  a  web  browser  without  the  installation  of 
special software. Please be sure to use “Microsoft Internet Explorer 4.x” or a higher version for the web browser. (This 
device uses “JavaScript” and “Cookies” and the browser should be set to accept these functions. The setting meth-
od will vary depending on the version of browser. Please refer to the help files and the...

54
Structure of the HTTP Server
POWER: This controls the power of the projector.
ON .....................................Power is switched on.
OFF  ...................................Power is switched off.
VOLUME: This controls the volume of the projector.
    .....................................Increases the volume adjustment value.
    .....................................Decreases the volume adjustment value.
AV-MUTE: This controls the mute function of the projector.
PICTURE ON...

55
SOURCE SELECT: This switches the input connector of the projector.COMPUTER1  ....................
Switches to the COMPUTER 1 IN connector.
COMPUTER2  ....................
Switches to the COMPUTER 2 IN connector.
COMPUTER3  ....................
Switches to the COMPUTER 3 (DVI-D) IN connector. 
COMPONENT  ...................
Switches to the COMPONENT IN connectors.
VIDEO  ...............................
Switches to the VIDEO IN connector.
S- VIDEO  ...........................Switches to the S-VIDEO IN...

5
M Projecting Your Computer’s Screen Image from the Projector  
via a Network [NETWORK PROJECTOR]
A Windows Vista-based  computer  can  be  operated  using  the  projector  over  a  network. The  projector  supports  the 
Network Projector function and the Remote Desktop function of Windows Vista. 
By selecting the projector connected to the same network as that of your PC, the PC screen image can be project-
ed to the screen via network. There is no need of connection using the VGA signal cable....