NEC Neax 2400 Ipx Wireless Features And Specifications

NEAX2400 IPX Wireless Features and SpecificationsPage 46NDA-24313, Issue 1
C-155 Call Forwarding PS Incoming Call Incomplete
Service Conditions (cont’d)
9. The incoming incomplete call to a Dterm PS can be transferred to other Dterm PS’s, stations, Attendant
Consoles, Central Office and TIE lines when CALL FORWARDING PS INCOMING CALL
INCOMPLETE is in service.
10. The timer value of incoming incomplete call is approximately eight seconds, time duration until the
system recognizes that the D
term PS is Out...

NEAX2400 IPX Wireless Features and Specifications
NDA-24313, Issue 1Page 47
Dterm PSII Two Line Operation D-155
D-155 Dterm PSII Two Line Operation
General Description
This feature allows for the appearance of two lines on the line (L1 and L2) keys of the PS.
Operating Procedure
No manual operation is required.
Service Conditions
1. This feature is available for Series 7300 or later software. 
2. Two kinds of lines can appear on the PS: My Line and Sub Line. These lines are associated with the
telephone...

NEAX2400 IPX Wireless Features and SpecificationsPage 48NDA-24313, Issue 1
N-43 Name Display - Intra-Node Call
N-43  Name Display - Intra-Node Call
General Description
This feature allows a PS to indicate user information corresponding to the calling Physical Station Number while
engaged in a station-to-station call.
Operating Procedure
 When originating a station-to-station call:
LCD display of the calling station:
LCD display of the called station:
 When a station call has been transferred to another...

NEAX2400 IPX Wireless Features and Specifications
NDA-24313, Issue 1Page 49
Name Display - Intra-Node Call - CCIS N-44
N-44  Name Display - Intra-Node Call - CCIS
General Description
Between CCIS nodes this feature allows the calling or called party information to be displayed on the LCD of a PS.
Operating Procedure
 When originating a call:
LCD display of the calling station:
LCD display of the called station:
 When a call has been transferred to another station by CALL FORWARDING - ALL CALLS/BUSY...

NEAX2400 IPX Wireless Features and SpecificationsPage 50NDA-24313, Issue 1
N-45 Number Sharing
N-45 Number Sharing
General Description
This feature allows the Dterm user to use a PS as a Sub Station. In this feature, the Dterm and PS are referred as Main
Station and Sub Station, respectively. The main functions of this feature are as follows:
1. Call Forwarding - All Calls to PS - When the D
term (Main Station) user presses the feature key or dials the
access code, Call Forwarding - All Calls to PS (Sub...

NEAX2400 IPX Wireless Features and Specifications
NDA-24313, Issue 1Page 51
Number Sharing N-45
Service Conditions (cont’d)
9. When this feature is set while a call is terminating to Main Station, the call is not transferred to Sub Station.
In this case, this feature is available from the next call.
10. Message Waiting Lamp control by MEASSAGE REMINDER or CMWL command is applied only to the
called/designated station.
11. Even if this feature is set, recall to Main Station is not forwarded to Sub...

NEAX2400 IPX Wireless Features and SpecificationsPage 52NDA-24313, Issue 1
V-24 Voice Mail Indication (VMI)
V-24 Voice Mail Indication (VMI)
General Description
This feature allows the system to notify a PS that a voice mail has been received.
Operating Procedure
No manual operation is required.
Service Conditions
1. This feature is available for Series 7300 or later software. 
2. When a voice mail is received while the PS user is in conversation, the system notifies the PS after the
conversion ends.
3....

NEAX2400 IPX Wireless Features and Specifications
NDA-24313, Issue 1Page 53
Wireless Analog Adjunct Connection W-8
W-8 Wireless Analog Adjunct Connection
General Description
This feature allows the existing PBX (no wireless function) to operate a PS as well  as a station  in the office. Each
PS is connected with the dedicated COT in the Built-in Wireless system. When a call is originated from the PS, it
terminates to the LC in the existing PBX via the corresponding COT and is handled by the existing...

NEAX2400 IPX Wireless Features and SpecificationsPage 54NDA-24313, Issue 1
W-8 Wireless Analog Adjunct Connection
Service Conditions (cont’d)
11. When a call terminates to the PS using this feature, the calling number is not displayed on the PS.
12. The following PBX services are available for PS’s using this feature:
 C.O. call origination
 C.O. call termination
 Intra-office services
 Common, the other services
ISDN service
 Network service
 Call charging management service
 Maintenance...

NEAX2400 IPX Wireless Features and Specifications
NDA-24313, Issue 1Page 55
ISDN Roaming I-41
I-41 ISDN Roaming
General Description
This feature allows PS to move to another PBX which has a different SYS-ID via Q.931a connection. The PBX
which PS can roam from/to is assigned Network Number (NWN). Network Number must be assigned as a unique
number for each network.
Operating Procedure
1. PS moves to another PBX which has a different SYS-ID.
2. PS registers its location automatically to the Home PBX at the...