NEC Neax 2400 Ipx Wireless Features And Specifications

NEAX2400 IPX Wireless Features and SpecificationsPage 36NDA-24313, Issue 1
H-23 Handover
H-23 Handover
General Description
When speech transmission quality becomes inferior, the Dterm PS re-originates a call automatically and seizes
another radio channel, making the PBX hand the call over to another zone transceiver to maintain speech quality.
Operating Procedure
No manual operation is required. The Dterm PS series automatically sends HANDOVER request to the PBX.
Service Conditions
1. This service is...

NEAX2400 IPX Wireless Features and Specifications
NDA-24313, Issue 1Page 37
DTMF Signal Sender D-154
D-154 DTMF Signal Sender
General Description
This service allows the Dterm PS series user to send the PB signal (tone) to the called party (terminal, voice mail
system, etc.) while engaged in communication.
Operating Procedure
To send the DTMF signal
1. Press a key while engaged in communication. The PBX automatically sends the corresponding signal tone
to the called party.
Service Conditions
1. When the...

NEAX2400 IPX Wireless Features and SpecificationsPage 38NDA-24313, Issue 1
C-156 Consultation Hold
C-156 Consultation Hold
General Description
This service allows the Dterm PS user to place a call on hold. Only that Dterm PS user can retrieve the held call.
Operating Procedure
To place a call on hold
1. While engaged in a call, press the TRF or F2 key; receive Special Dial Tone. The called number displayed
on the LCD while engaged in a call will go out when the TRF or F2 key is pressed. The called party...

NEAX2400 IPX Wireless Features and Specifications
NDA-24313, Issue 1Page 39
Flexible PS Numbering F-34
F-34 Flexible PS Numbering
General Description
Each Dterm PS series is assigned an unique number.
Operating Procedure
No manual operation is required. The data is entered via the maintenance administration terminal.
Service Conditions
1. A maximum of nine digits can be assigned for a Dterm PS number, including # and *. The Dterm PS
numbers must be assigned in uniform number of digits. 

NEAX2400 IPX Wireless Features and SpecificationsPage 40NDA-24313, Issue 1
P-64 PS Service Class
P-64 PS Service Class
P-65 PS Restriction Class
General Description
This service permits all the Dterm PS series to be assigned a class of service in accordance with the degree of the
system use desired.
Operating Procedure
No manual operation is required.
Service Conditions
1. The route service class is assigned to determine the accessibility to the following service features.
ANNOUNCEMENT - DONT ANSWER...

NEAX2400 IPX Wireless Features and Specifications
NDA-24313, Issue 1Page 41
PS-to-Station Calling P-66
P-66 PS-to-Station Calling
General Description
This service allows the Dterm PS series user to place a call to a PBX station, and vice versa.
Operating Procedure
To place a call using OVERLAP DIALING
1. Press the SEND or L1 key; receive Dial Tone.
2. Dial the desired number; receive Ringback Tone.
To place a call using PRESET DIALING
1. Dial the desired number, then press the SEND L1 key; receive...

NEAX2400 IPX Wireless Features and SpecificationsPage 42NDA-24313, Issue 1
S-131 Stack Dialing - Station
S-131 Stack Dialing - Station
General Description
This service allows the Dterm PS series user to store the last five numbers dialed and to redial the numbers by
pressing the REDIAL/PAUSE or F3 key.
Operating Procedure
To store the number
1. Using either OVERLAP DIALING or PRESET DIALING, dial the desired number. The number dialed
is stored automatically.
To redial the stored number using OVERLAP...

NEAX2400 IPX Wireless Features and Specifications
NDA-24313, Issue 1Page 43
Speed Calling - Station S-132
S-132  Speed Calling - Station
General Description
This service allows the Dterm PS series user to dial certain frequently called numbers using 2-digit abbreviated call
codes.
Operating Procedure
The Speed Calling data is set via the user definable data assignment. For detailed operation, refer to the Dterm PS
User Guide.
Service Conditions
1. Each abbreviated call code can store a maximum of 40...

NEAX2400 IPX Wireless Features and SpecificationsPage 44NDA-24313, Issue 1
A-128 Automatic Announcement - Disconnected PS Out Of Zone
A-128   Automatic Announcement - Disconnected PS 
Out Of Zone
General Description
When a talking Dterm PS series user moves Out of Zone, that is, the Wireless service area, to have the progressing
call disconnected, the counterpart hears the announcement that the talks are disconnected due to the talking party
moving Out of Zone. This also can apply when the power of...

NEAX2400 IPX Wireless Features and Specifications
NDA-24313, Issue 1Page 45
Automatic Announcement - Called PS Out of Zone A-129
A-129 Automatic Announcement - Called PS
Out of Zone
C-155  Call Forwarding PS Incoming Call Incomplete
General Description
When a call cannot be terminated due to the called Dterm PS series which is Out of ZT or whose power is OFF, the
system automatically answers the call and provides an announcement to notify the calling party that the called Dterm
PS is Out of Zone or if...