NEC Neax 2400 Ipx Wireless Features And Specifications

NEAX2400 IPX Wireless Features and SpecificationsPage 66NDA-24313, Issue 1
G-23 Group Call - Automatic Conference (20-Party)
G-23 Group Call - Automatic Conference (20-Party)
General Description
This feature enables a PS user to call a maximum of “20-Party (self + other 19 members)” conference, only by
dialing a pre-programmed Group Calling Conference Number. If the Group Calling Conference Number is once
dialed, the member PSs/Stations are automatically called in assigned order at the interval of every...

NEAX2400 IPX Wireless Features and Specifications
NDA-24313, Issue 1Page 67
Group Call - Automatic Conference (20-Party) G-23
Service Conditions (cont’d)
8. By assigning the Phantom Telephone Number to the telephone number, the maximum number of
conference group per set of CFTB circuit cards is 17 (Phantom Telephone Number: 16 + telephone
number: 1).
9. This service must not be assigned to the ports of LC used for LC-COT connection.
10. If a conference leader hangs up (or is out of zone), the conference...

NEAX2400 IPX Wireless Features and SpecificationsPage 68NDA-24313, Issue 1
S-134 Short Text Messaging Service (STM Service)
S-134  Short Text Messaging Service (STM Service)
General Description
This feature enables a short text message (STM), once arrived at a mail box of the Short Text Message Server
(external equipment), to be automatically distributed to the addressee PS via Open Application Interface (OAI).This
feature also provides a Zip Tone and “TM WAITING” notification on the display (LCD) of the...

NEAX2400 IPX Wireless Features and Specifications
NDA-24313, Issue 1Page 69
Short Text Messaging Service (STM Service) S-134
Service Conditions (cont’d)
10. Hardware Requirements: PS and ZT that are both supporting this feature should be used. If other PS/ZT
is used, the following occurs at the PBX side:
 PBX sends an STM request to a PS.
 PBX cannot obtain a response signal from the PS. Also, PBX cannot identify that the PS/ZT is
not compatible with the STM feature.
 PBX judges the PS as in (and...

NEAX2400 IPX Wireless Features and SpecificationsPage 70NDA-24313, Issue 1
This page is for your notes. 

NEAX2400 IPX Wireless Features and Specifications
NDA-24313, Issue 1Page 71
Movement of PS in NEAX2400 IPX
Movement of PS in NEAX2400 IPX
PCS Community
The SYS-ID is a unique ID which was given in order to manage the PCS system. The area where the SYS-ID is
effective is called PCS Community. Every PCS Community in a FCCS network is given a unique PCS Community
Number (PCN). Each PCN has its own SYS-ID. The PCN is used in stead of the SYS-ID for MAT command, and
this can reduce the effect upon changing...

NEAX2400 IPX Wireless Features and SpecificationsPage 72NDA-24313, Issue 1
Movement of PS in NEAX2400 IPX
MOVE TO
MOVE FROMA, B HOME 
NODE 
HOME PCNC, D 
OTHER 
NODE 
HOME PCNE, F HOME 
NODE 
OTHER 
PCNG, H 
OTHER 
NODE 
OTHER 
PCNI
OTHER 
FCCS 
FIRST VISIT 
NODE 
FIRST PCSK
OTHER 
FCCS 
OTHER 
NODE   
FIRST PCNJ
OTHER 
FCCS 
FIRST 
VISIT 
NODE 
OTHER 
PCNL
OTHER 
FCCS 
OTHER 
NODE 
OTHER 
PCNM
YET OTHER 
FCCS
A
HOME NODE 
HOME PCN
Stand-by 
condition 
Movement 
H-OStand-by 
condition 
Movement...

NEAX2400 IPX Wireless Features and Specifications
NDA-24313, Issue 1Page 73
Movement of PS in NEAX2400 IPX
Note:This pattern is treated as Roaming by re-Roaming to the home node in FCCS-I.
I
OTHER FCCS 
FIRST VISIT 
NODE FIRST 
PCN
Roaming Roaming Roaming RoamingStand-by 
condition 
Movement 
H-OStand-by 
condition 
Movement 
H-ORoaming Note
Roaming 
NoteRoaming
K
OTHER FCCS 
OTHER NODE 
FIRST PCN
Roaming Roaming Roaming RoamingStand-by 
condition 
Movement 
H-OStand-by 
condition 
Movement 
H-ORoaming...

NEAX2400 IPX Wireless Features and SpecificationsPage 74NDA-24313, Issue 1
This page is for your notes.