NEC Neax 2400 Ipx Wireless Features And Specifications

NEAX2400 IPX Wireless Features and SpecificationsPage 56NDA-24313, Issue 1
I-41 ISDN Roaming
Service Conditions (cont’d)
13. A PS can move to any node of the FCCS network that has a different SYS-ID, on the condition that a
Q.931a Tie Line is established between the different SYS-ID FCCS networks. (Available for Series 7400
software.)
Q.931a Tie 
Line
FCCS-Roaming FCCS-RoamingRoaming
Roaming
Roaming
Roaming Node A
Node BFCCS PS
Node C FCCS
Node D
PSFCCS Network B
(SYS-ID:ZZZZZZZZZ) FCCS Network A...

NEAX2400 IPX Wireless Features and Specifications
NDA-24313, Issue 1Page 57
Call Forwarding - Dropped Calls C-161
C-161  Call Forwarding - Dropped Calls
General Description
This feature provides a call forwarding function when a PS encounters a Squelch Disconnection (such as PS moving
out of zone, failing to hand over a call, or a sudden power down of the PS) during a two-way connection with a
station/trunk. If this feature is set, the PS can forward the unexpectedly disconnected call to a pre-assigned...

NEAX2400 IPX Wireless Features and SpecificationsPage 58NDA-24313, Issue 1
C-161 Call Forwarding - Dropped Calls
Service Conditions (cont’d)
5. When a call is currently being transferred by this feature, the forwarded party (not the forwarding
destination but the party first connected to the Squelch PS) hears the Ringback Tone.
6. When this feature has been activated during a two-way call between a PS and a station (including PS), the
station now being transferred to the forwarding destination, cannot...

NEAX2400 IPX Wireless Features and Specifications
NDA-24313, Issue 1Page 59
Call Forwarding - Dropped Calls C-161
Interactions
1. When a Squelch Disconnection occurs during a two-way connection between a PS and a station (including
PS), the following ensue according to the assigned service(s):
 When AUTOMATIC ANNOUNCEMENT - CALLED PS OUT OF ZONE is assigned to the
Squelch PS
The party, not the Squelch PS, hears the announcement.
 When this feature is assigned to the Squelch PS
The disconnected call is...

NEAX2400 IPX Wireless Features and SpecificationsPage 60NDA-24313, Issue 1
I-40 ISDN Data Communications - 32 kbps
I-40 ISDN Data Communications - 32 kbps
General Description
This feature enables a data terminal connected to a PS to develop the data communications via the 32 kbps
unrestricted digital network. By using this feature, the PS-connected terminals can communicate with the TA
equipment available for V.110 or PCS Internet Access Forum Standard (PIAFS) and also with the terminals
available via...

NEAX2400 IPX Wireless Features and Specifications
NDA-24313, Issue 1Page 61
ISDN Data Communications - 32 kbps I-40
General Description
Bearer Capability
Between the PBX and ZT, the following message conversion is performed:
1. When originating via Wireless (Low Layer Compatibility element = Without User Information Layer 1
Protocol)
2. When originating via Wireless (Low Layer Compatibility element = With User Information Layer 1
Protocol)
3. When terminating to Wireless (Low Layer Compatibility element...

NEAX2400 IPX Wireless Features and SpecificationsPage 62NDA-24313, Issue 1
I-40 ISDN Data Communications - 32 kbps
Operating Procedure
Use the ATD command for data sending (origination) and the ATA command for answering.
Service Conditions
Conditions between PBX and ZT
1. Only CCITT standardized rate adaption, V.110 or X.30, can be used as the User Information Layer 1
Protocol in case of data termination.
2. Allowed User Rate of the Bearer is 32 kbps only.
3. The sub-line of the two-line D
term PS does...

NEAX2400 IPX Wireless Features and Specifications
NDA-24313, Issue 1Page 63
Authorization Code - Dterm PSII A-137
A-137 Authorization Code - Dterm PSII
General Description
An AUTHORIZATION CODE is a numerical code dialed by PS users (up to ten digits), which will override the
station CLASS OF SERVICE - INDIVIDUAL [C-15] for facility access restriction.
Operating Procedure
Procedure 1
 With feature Access Code
1. Go on-hook and receive Dial Tone.
2. Enter the feature Access Code and receive Service Set...

NEAX2400 IPX Wireless Features and SpecificationsPage 64NDA-24313, Issue 1
C-166 Call Park - Dterm PSII
C-166 Call Park - Dterm PSII
General Description
This feature enables a PS user to “Park” a call (C.O. line, Tie Line, station and PS) by hooking and dialing a Call
Park Access Code, and by dialing the Call Park retrieval code and the telephone number that parked a call, the parked
call can easily be retrieved from any PS/Station within the system. If the user forgets to retrieve the parked call, the...

NEAX2400 IPX Wireless Features and Specifications
NDA-24313, Issue 1Page 65
Call Park - Dterm PSII C-166
Service Conditions
1. This feature is also available for Sub Line (L2) of a two-line Dterm PS (by using Two-Line Operation).
2. The parked PS cannot hold a terminal.
3. A PS can park only one call at a time.
4. A PS cannot park an Attendant Console.
5. When the Call Park key of Attendant Console key pattern is valid, and the Attendant  Console is parking
a PS, the Attendant Console operator can...