NEC Neax 2400 Ipx Hotel Office Data Specification
Have a look at the manual NEC Neax 2400 Ipx Hotel Office Data Specification online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1168 NEC manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
NDA-24315 CHAPTER 4 Page 69 Issue 1 AHSY: Assignment of Hotel System Parameter 179 b0 Not usedb1 b2 b3 b4Designation of Guest Access Code b7b6b5b4ACC - CODEb7b6b5b4ACC - CODE 0000 Out of Service 0111 7 0001 1 1000 8 0010 2 1001 9 0011 3 1010 0 0100 4 1011 * 0101 5 1100 # 0110 6 b5 b6 b7 18000Not used 18100Not used 182 0b0Not used b1 Called # printout (Alert Service) 0/1 = No/Yes b2 When a guest station has been called out by Alert Service, if that guest station is Busy, Locked Out, or under Make-Busy status, that information is printed out. 0/1 = Not Required/Required 9b3 STA # Answers = Printout 0/1 = No/Yes b4 When a guest station has been called out by Alert Service, if that guest station does not answer, the information is printed out. 0/1 = Not Required/Required 0b5 Not used0b6 0b7 INDEX (0 – 1023)DATA (DATA) 00 – FF (Hex)BIT CORRESPONDING DATA CONTENTS DATA 0/1BIT
CHAPTER 4 NDA-24315 Page 70 Issue 1 AHSY: Assignment of Hotel System Parameter 183 b0Setting of Attendant Console that sets Alert Service 0 Hex: Service can be set from any of the Attendant Consoles 1 - F Hex: Service can be set only from the Attendant Console of the designated Console Number b1 b2 b3 b4 Classifying the call termination indicating keys based on the Language category of the guest at the time an incoming call from the guest station terminated to the Attendant Console. 0/1 = Not Required/Required b5Not used b6 In the case of “All Event No Printout,” the Hotel printer prints out only the information pertaining to outgoing calls. 0/1 = Out/In Service (The outgoing call data is assigned by INDEXes 360 through 367.) 0b7Not used 184 0b0 Not used 0b1 0b2 0b3 0b4 0b5 b6Processing for “No Answer” at the Attendant Console in the case where Automatic Wake-Up Attendant - Assistance service is provided. b7b6 0 0 : Changeover to Automatic Wake-Up 0 1 : No processing for “No Answer” 1 0 : Call termination to Attendant Console is canceled. 1 1 : All Wake-Up calls are terminated to the Attendant Console (including Automatic Wake-Up Call). b7 INDEX (0 – 1023)DATA (DATA) 00 – FF (Hex)BIT CORRESPONDING DATA CONTENTS DATA 0/1BIT
NDA-24315 CHAPTER 4 Page 71 Issue 1 AHSY: Assignment of Hotel System Parameter 185 0b0Not used b1 Guest Room Calling - Attendant Console Service 0/1 = Out/In Service 0b2 Not used 0b3 0b4 0b5 0b6 0b7 186 b0 Not used b1 b2 b3 b4 b5 b6 b7 Double Suite Room Service 0/1 = Out/In Service 187 0b0Not used0b1 b2 Processing for the case where there is any busy station among the Suite Room stations generally called by Suite Room Calling - Attendant Console service 0/1 = Sending Busy Tone/Idle Station Calling 0b3 Not used 0b4 0b5 0b6 0b7 INDEX (0 – 1023)DATA (DATA) 00 – FF (Hex)BIT CORRESPONDING DATA CONTENTS DATA 0/1BIT
CHAPTER 4 NDA-24315 Page 72 Issue 1 AHSY: Assignment of Hotel System Parameter 188 b0Processing for Suite Room Station/Connecting Room Station Busy b1b0 0 0 : Busy Tone 0 1 : An idle station within the room is called 1 0 : From a station, the call is transferred to the Attendant Console if the caller is not the console operator. b1 0b2Fixed Data0b3 0b4Not used b5 When a call terminates to the Double Suite Room: 0/1 = All stations ring simultaneously/Alternately between Primary Suite and Secondary Suite 1b6Fixed Data b7 Suite Room Service 0/1 = Out/In Service 189 b0 Not used b1 b2 b3 b4 b5 Calling an Individual Suite Room Station Calling 0: An individual Suite Room station can be called from a Guest Station, Administration Station, and Attendant Console. 1: An individual Suite Room station can be called from a Special Administration and Attendant Console. b6 Ringing at the time of general calling in the Connecting Room or Suite Room stations. 0: Ringing all stations. 1: Ringing the station in the main room for the Connecting Room; ringing the Primary station for a Suite Room b7 Number to be dialed for general calling of the station in the Suite Room 0: Primary Station Number or Pilot (Phantom) Number 1: Only Pilot (Phantom) Number 19000Not used INDEX (0 – 1023)DATA (DATA) 00 – FF (Hex)BIT CORRESPONDING DATA CONTENTS DATA 0/1BIT
NDA-24315 CHAPTER 4 Page 73 Issue 1 AHSY: Assignment of Hotel System Parameter 19100Not used 19200Not used 19300Not used 19400Not used 19500Not used 19600Not used 19700Not used 19800Not used 19900Not used 20000Not used 20100Not used 20200Not used 20300Not used 20400Not used 20500Not used 20600Not used 20700Not used 20800Not used 20900Not used 21000Not used 21100Not used 21200Not used 21300Not used 21400Not used 21500Not used 21600Not used 21700Not used 21800Not used 21900Not used 22000Not used 22100Not used 22200Not used 22300Not used 22400Not used 22500Not used INDEX (0 – 1023)DATA (DATA) 00 – FF (Hex)BIT CORRESPONDING DATA CONTENTS DATA 0/1BIT
CHAPTER 4 NDA-24315 Page 74 Issue 1 AHSY: Assignment of Hotel System Parameter 22600Not used 22700Not used 22800Not used 22900Not used 23000Not used 23100Not used 23200Not used 23300Not used 23400Not used 23500Not used 23600Not used 23700Not used 23800Not used 23900Not used 24000Not used 24100Not used 24200Not used 24300Not used 24400Not used 245 00Not used 24600Not used 24700Not used 24800Not used 24900Not used 25000Not used 25100Not used 252b0 Room Key Information 0/1 = Key Rack Type/Card Rack Type 0b1~b7Not used 25300Not used 25400Not used 25500Not used 25600Not used 25700Not used INDEX (0 – 1023)DATA (DATA) 00 – FF (Hex)BIT CORRESPONDING DATA CONTENTS DATA 0/1BIT
NDA-24315 CHAPTER 4 Page 75 Issue 1 AHSY: Assignment of Hotel System Parameter 258 0b0Not used b1 Maid Status - Cleaning Start via Guest Station (Feature Code = 11, Function Code = 1) Sending Service Feature Text (Information) to PMS 0/1 = In Service/Out Service When the text is not to be sent to PMS, “1” is assigned to the corresponding bit. b2 Maid Status - Cleaning End via Guest Station (Feature Code = 11, Function Code = 2) b3 Maid Status - Inspection End via Guest Station (Feature Code = 11, Function Code = 3) 0b4 Not used0b5 0b6 0b7 259Not used 260 b0Not used b1 Maid Status - Cleaning Start via Special Admin. Station (Feature Code = 12, Function Code = 1) Sending Service Feature Text (Information) to PMS 0/1 = In Service/Out Service When the text is not to be sent to PMS, “1” is assigned to the corresponding bit. b2 Maid Status - Cleaning End via Special Admin. Station (Feature Code = 12, Function Code = 2) b3 Maid Status - Inspection End via Special Admin. Station (Feature Code = 12, Function Code = 3) b4 Not usedb5 b6 b7 26100Not used INDEX (0 – 1023)DATA (DATA) 00 – FF (Hex)BIT CORRESPONDING DATA CONTENTS DATA 0/1BIT
CHAPTER 4 NDA-24315 Page 76 Issue 1 AHSY: Assignment of Hotel System Parameter 262 0b0 Not used Sending Service Feature Text (Information) to PMS 0/1 = In Service/Out Service When the text is not to be sent to PMS, “1” is assigned to the corresponding bit. 0b1 0b2 b3 Message Waiting Lamp - On (Feature Code = 13, Function Code = 3) b4 Message Waiting Lamp - Off (Feature Code = 13, Function Code = 4) 0b5 Not used0b6 0b7 26300Not used 264 0b0Not used Sending Service Feature Text (Information) to PMS 0/1 = In Service/Out of Service When the text is not to be sent to PMS, “1” assigned to the corresponding bit. 0b1 b2 Call Detail Data (Feature Code = 14, Function Code = 2) b3 Not used 0b4 0b5 0b6 0b7 26500Not used INDEX (0 – 1023)DATA (DATA) 00 – FF (Hex)BIT CORRESPONDING DATA CONTENTS DATA 0/1BIT
NDA-24315 CHAPTER 4 Page 77 Issue 1 AHSY: Assignment of Hotel System Parameter 266 0b0Not used Sending a Service Feature Text (Information) to PMS. 0/1 = In Service/Out Service When the text is not to be sent to PMS, “1” assigned to the corresponding bit. 0b1 b2 Room Cutoff and Do Not Disturb (Feature Code = 15, Function Code = 2) b3 Not used 0b4 0b5 0b6 0b7 26700Not used 268 0b0 Not used0b1 0b2 0b3 b4 Checkout - C.O. line Outgoing Call Report (Feature Code = 16, Function Code = 5) b5 Checkout - Message Off Report (Feature Code = 16, Function Code = 6) 0b6 Checkout - Message On Report (Feature Code = 16, Function Code = 6) 0b7Not used 269 0b0 Not used0b1 0b2 0b3 b4 Checkout - C.O. line Outgoing Call Report (Feature Code = 16, Function Code = C) b5 Checkout - Message Waiting Report (Feature Code = 16, Function Code = D) 0b6Not used0b7 INDEX (0 – 1023)DATA (DATA) 00 – FF (Hex)BIT CORRESPONDING DATA CONTENTS DATA 0/1BIT
CHAPTER 4 NDA-24315 Page 78 Issue 1 AHSY: Assignment of Hotel System Parameter 270 0b0Not used Sending a Service Feature Text (Information) to PMS 0/1 = In Service/Out of Service When the text is not to be sent to PMS, “1” is assigned to the corresponding bit. 0b1 b2 Room Data Image - Room Data Report (Feature Code = 17, Function Code = 2) 0b3Not used b4 Room Data Image - Room Data Exchange (Feature Code = 17, Function Code = 4) 0b5Not used b6 Room Data Image - Room Data Report (Feature Code = 17, Function Code = 6) 0b7Not used 271 b0 Room Data Image - Room Data Exchange (Feature Code = 17, Function Code = 8) 0b1Not used b2 Room Data Image - Room Data Report (Feature Code = 17, Function Code = A) 0b3Not used b4 Room Data Image - Room Data Exchange (Feature Code = 17, Function Code = C) 0b5Not used b6 Station Delete Report (Feature Code = 17, Function Code = E) b7 Station Delete Report (Feature Code = 17, Function Code = F) 27200Not used 27300Not used INDEX (0 – 1023)DATA (DATA) 00 – FF (Hex)BIT CORRESPONDING DATA CONTENTS DATA 0/1BIT