NEC Neax 2400 Imx System Operations And Maintenance Manual
Here you can view all the pages of manual NEC Neax 2400 Imx System Operations And Maintenance Manual. The NEC manuals for Communications System are available online for free. You can easily download all the documents as PDF.
Page 501
![Page 501
CHAPTER 6 NDA-24238
Page 474
Revision 3.0
SYSTEM OPERATIONS
STEP 4 Analyze the displayed system messages.
After STEPs 1 through 3 are performed, the system messages [7-U] and [7-V] will automati-
cally display. Make sure that no errors occurred during the PLO changeover process.
12.2 Initialization
12.2.1 General
This section explains the initialization types:
System Initialization
System Initialization by Turning ON the Power Supply, Section 12.2.2
System Initialization by Key Operations on the...](http://img.usermanuals.tech/thumb/54/84348/w300_nec-neax2400-imx-system-operations-and-maintenance-manual_d-500.png "Page 501
CHAPTER 6 NDA-24238
Page 474
Revision 3.0
SYSTEM OPERATIONS
STEP 4 Analyze the displayed system messages.
After STEPs 1 through 3 are performed, the system messages [7-U] and [7-V] will automati-
cally display. Make sure that no errors occurred during the PLO changeover process.
12.2 Initialization
12.2.1 General
This section explains the initialization types:
System Initialization
System Initialization by Turning ON the Power Supply, Section 12.2.2
System Initialization by Key Operations on the...")
CHAPTER 6 NDA-24238 Page 474 Revision 3.0 SYSTEM OPERATIONS STEP 4 Analyze the displayed system messages. After STEPs 1 through 3 are performed, the system messages [7-U] and [7-V] will automati- cally display. Make sure that no errors occurred during the PLO changeover process. 12.2 Initialization 12.2.1 General This section explains the initialization types: System Initialization System Initialization by Turning ON the Power Supply, Section 12.2.2 System Initialization by Key Operations on the...
Page 502
NDA-24238 CHAPTER 6 Page 475 Revision 3.0 SYSTEM OPERATIONS 12.2.2 System Initialization by Turning ON Power Supply This initialization executes when the power supply to the system has stopped. Follow the procedure in Table 6-10. Table 6-10 System Initialization by Turning On Power Supply Procedure ACTION REMARKS START ATTENTIONContents Static Sensitive Handling Precautions Required Turn ON power supply at PWR cards. END Confirm all switches are turned OFF on PWR cards. Power supply to the PBX is...
Page 503
CHAPTER 6 NDA-24238 Page 476 Revision 3.0 SYSTEM OPERATIONS 12.2.3 System Initialization by Key Operations on TOPU Table 6-11 shows the system initialization procedure. Figure 6-57 shows the initial program load con- ceptional diagram. Table 6-11 System Initialization Procedure Types TYPE DESCRIPTION Procedure #1 (Table 6-12)System Initialization without Loading Whole system is initialized. All communications are forcibly released. System restarts with current Main Memory Files and Office Data Files...
Page 504
NDA-24238 CHAPTER 6 Page 477 Revision 3.0 SYSTEM OPERATIONS Figure 6-57 Conceptional Diagram of Initial Program Load HDD Main Memory Files Basic Software (#2-11)s (=PROGRAM) Standard Service Software IMAT Software (#1-2) TCP/IP Software (#1) Office Data Files Data Memory (ASYD, AUNT, (=SYSTEM DATA) ANPD, ASPA, ASDT, etc.) Call Forwarding Data Speed Calling Data Name Display Data RCF NDM LDM User Assign Soft Key Data Number Sharing Data Call Block DRAM CPU PBXInitial Program Load
Page 505
CHAPTER 6 NDA-24238 Page 478 Revision 3.0 SYSTEM OPERATIONS To initialize the system, check the lamp indications in Figure 6-58, and operate the keys on PZ-DK222 (TOPU). Figure 6-58 Related Keys and LEDs for System Initialization LOAD NON LOAD PROGRM NON LOAD SYSTEM DATA LOAD 12 34 567 8 OFF 12 34 567 8 OFF 12 34 OFF MBR FDD ON OFF ON OFF OUT PWR IN PWR5AHDD SW MB SYSTEM SELECT2 CPURST SLOT No. 0 1 2 3 4 5 6 ON ON ON ALM RSTON OFF PFTON OFF START INITIAL EFFECT 030413 14 1314 13 14 13 14 FRONT...
Page 506
![Page 506
NDA-24238 CHAPTER 6
Page 479
Revision 3.0
SYSTEM OPERATIONS
Table 6-12 System Initialization Without Loading [Procedure #1]
ACTION7SEG LED/OPE LAMP/KEY
SETTINGS
START
CPU OPE lamp on the DSP of
active CPU lights steadily green.
IMG0-3 lamps flash.
IMG0 lamp on the DSP of mate
CPU flashes green.
CPU OPE and IMGX lamps on
both DSP go OFF.
STATUS LED (right) on
the CPU is ON.
STATUS LED (right) on
the DSP of CPU is ON.
CPU OPE lamp on the DSP of
active CPU lights steadily green.
IMG0-3 lamps...](http://img.usermanuals.tech/thumb/54/84348/w300_nec-neax2400-imx-system-operations-and-maintenance-manual_d-505.png "Page 506
NDA-24238 CHAPTER 6
Page 479
Revision 3.0
SYSTEM OPERATIONS
Table 6-12 System Initialization Without Loading [Procedure #1]
ACTION7SEG LED/OPE LAMP/KEY
SETTINGS
START
CPU OPE lamp on the DSP of
active CPU lights steadily green.
IMG0-3 lamps flash.
IMG0 lamp on the DSP of mate
CPU flashes green.
CPU OPE and IMGX lamps on
both DSP go OFF.
STATUS LED (right) on
the CPU is ON.
STATUS LED (right) on
the DSP of CPU is ON.
CPU OPE lamp on the DSP of
active CPU lights steadily green.
IMG0-3 lamps...")
NDA-24238 CHAPTER 6 Page 479 Revision 3.0 SYSTEM OPERATIONS Table 6-12 System Initialization Without Loading [Procedure #1] ACTION7SEG LED/OPE LAMP/KEY SETTINGS START CPU OPE lamp on the DSP of active CPU lights steadily green. IMG0-3 lamps flash. IMG0 lamp on the DSP of mate CPU flashes green. CPU OPE and IMGX lamps on both DSP go OFF. STATUS LED (right) on the CPU is ON. STATUS LED (right) on the DSP of CPU is ON. CPU OPE lamp on the DSP of active CPU lights steadily green. IMG0-3 lamps...
Page 507
![Page 507
CHAPTER 6 NDA-24238
Page 480
Revision 3.0
SYSTEM OPERATIONS
Table 6-13 System Initialization With Office Data Loading From HD [Procedure #2]
ACTION7SEG LED/OPE LAMP/KEY
SETTINGS
START
CPU OPE lamp on the DSP of
active CPU lights steadily green.
IMG0-3 lamps flash.
IMG0 lamp on the DSP of mate
CPU flashes green.
CPU OPE and IMGX lamps on
both DSP go OFF.
STATUS LED (right) on
the DSP of CPU is ON.
STATUS LED (right) on
the DSP of CPU is ON.
STATUS LED (right) on
the DSP of active CPU
is ON....](http://img.usermanuals.tech/thumb/54/84348/w300_nec-neax2400-imx-system-operations-and-maintenance-manual_d-506.png "Page 507
CHAPTER 6 NDA-24238
Page 480
Revision 3.0
SYSTEM OPERATIONS
Table 6-13 System Initialization With Office Data Loading From HD [Procedure #2]
ACTION7SEG LED/OPE LAMP/KEY
SETTINGS
START
CPU OPE lamp on the DSP of
active CPU lights steadily green.
IMG0-3 lamps flash.
IMG0 lamp on the DSP of mate
CPU flashes green.
CPU OPE and IMGX lamps on
both DSP go OFF.
STATUS LED (right) on
the DSP of CPU is ON.
STATUS LED (right) on
the DSP of CPU is ON.
STATUS LED (right) on
the DSP of active CPU
is ON....")
CHAPTER 6 NDA-24238 Page 480 Revision 3.0 SYSTEM OPERATIONS Table 6-13 System Initialization With Office Data Loading From HD [Procedure #2] ACTION7SEG LED/OPE LAMP/KEY SETTINGS START CPU OPE lamp on the DSP of active CPU lights steadily green. IMG0-3 lamps flash. IMG0 lamp on the DSP of mate CPU flashes green. CPU OPE and IMGX lamps on both DSP go OFF. STATUS LED (right) on the DSP of CPU is ON. STATUS LED (right) on the DSP of CPU is ON. STATUS LED (right) on the DSP of active CPU is ON....
Page 508
![Page 508
NDA-24238 CHAPTER 6
Page 481
Revision 3.0
SYSTEM OPERATIONS
Table 6-14 System Initialization with Program Loading From HD [Procedure #3]
ACTION7SEG LED/OPE LAMP/KEY
SETTINGS
START
CPU OPE lamp on the DSP of
active CPU lights steadily green.
IMG0-3 lamps flash.
IMG0 lamp on the DSP of
active CPU flashes green.
CPU OPE and IMGX lamps on
both DSP go OFF.
STATUS LED (right) on
the DSP of CPU is ON.
STATUS LED (right) on
the DSP of CPU is ON.
STATUS LED (right) on
the DSP of active CPU
is ON.
CPU...](http://img.usermanuals.tech/thumb/54/84348/w300_nec-neax2400-imx-system-operations-and-maintenance-manual_d-507.png "Page 508
NDA-24238 CHAPTER 6
Page 481
Revision 3.0
SYSTEM OPERATIONS
Table 6-14 System Initialization with Program Loading From HD [Procedure #3]
ACTION7SEG LED/OPE LAMP/KEY
SETTINGS
START
CPU OPE lamp on the DSP of
active CPU lights steadily green.
IMG0-3 lamps flash.
IMG0 lamp on the DSP of
active CPU flashes green.
CPU OPE and IMGX lamps on
both DSP go OFF.
STATUS LED (right) on
the DSP of CPU is ON.
STATUS LED (right) on
the DSP of CPU is ON.
STATUS LED (right) on
the DSP of active CPU
is ON.
CPU...")
NDA-24238 CHAPTER 6 Page 481 Revision 3.0 SYSTEM OPERATIONS Table 6-14 System Initialization with Program Loading From HD [Procedure #3] ACTION7SEG LED/OPE LAMP/KEY SETTINGS START CPU OPE lamp on the DSP of active CPU lights steadily green. IMG0-3 lamps flash. IMG0 lamp on the DSP of active CPU flashes green. CPU OPE and IMGX lamps on both DSP go OFF. STATUS LED (right) on the DSP of CPU is ON. STATUS LED (right) on the DSP of CPU is ON. STATUS LED (right) on the DSP of active CPU is ON. CPU...
Page 509
![Page 509
CHAPTER 6 NDA-24238
Page 482
Revision 3.0
SYSTEM OPERATIONS
Table 6-15 System Initialization With Office Data And Program Loading From HD [Procedure #4]
ACTION7SEG LED/OPE LAMP/KEY
SETTINGS
START
CPU OPE lamp on the DSP of
active CPU lights steadily green.
IMG0-3 lamps flash.
IMG0 lamp on the DSP of mate
CPU flashes green.
CPU OPE and IMGX lamps on
both DSP go OFF.
STATUS LED (right) on
the DSP of CPU is ON.
STATUS LED (right) on
the DSP of CPU is ON.
STATUS LED (right) on
the DSP of CPU is...](http://img.usermanuals.tech/thumb/54/84348/w300_nec-neax2400-imx-system-operations-and-maintenance-manual_d-508.png "Page 509
CHAPTER 6 NDA-24238
Page 482
Revision 3.0
SYSTEM OPERATIONS
Table 6-15 System Initialization With Office Data And Program Loading From HD [Procedure #4]
ACTION7SEG LED/OPE LAMP/KEY
SETTINGS
START
CPU OPE lamp on the DSP of
active CPU lights steadily green.
IMG0-3 lamps flash.
IMG0 lamp on the DSP of mate
CPU flashes green.
CPU OPE and IMGX lamps on
both DSP go OFF.
STATUS LED (right) on
the DSP of CPU is ON.
STATUS LED (right) on
the DSP of CPU is ON.
STATUS LED (right) on
the DSP of CPU is...")
CHAPTER 6 NDA-24238 Page 482 Revision 3.0 SYSTEM OPERATIONS Table 6-15 System Initialization With Office Data And Program Loading From HD [Procedure #4] ACTION7SEG LED/OPE LAMP/KEY SETTINGS START CPU OPE lamp on the DSP of active CPU lights steadily green. IMG0-3 lamps flash. IMG0 lamp on the DSP of mate CPU flashes green. CPU OPE and IMGX lamps on both DSP go OFF. STATUS LED (right) on the DSP of CPU is ON. STATUS LED (right) on the DSP of CPU is ON. STATUS LED (right) on the DSP of CPU is...
Page 510
![Page 510
NDA-24238 CHAPTER 6
Page 483
Revision 3.0
SYSTEM OPERATIONS
Table 6-16 System Initialization by Phase 1 Restart [Procedure #5]
ACTION7SEG LED/OPE LAMP/KEY
SETTINGS
START
CPU OPE lamp on the DSP of
active CPU light steadily green.
(IMG0-3 lamps flash.)
IMG0 lamp on the DSP of mate
CPU flashes green.
CPU OPE and IMGX lamps on
both DSP go OFF.
STATUS LED (right) on
the CPU is ON.
STATUS LED (right) on
the DSP of CPU is ON.
CPU OPE lamp on the DSP of
active CPU lights steady green.
(IMG0-3 lamps...](http://img.usermanuals.tech/thumb/54/84348/w300_nec-neax2400-imx-system-operations-and-maintenance-manual_d-509.png "Page 510
NDA-24238 CHAPTER 6
Page 483
Revision 3.0
SYSTEM OPERATIONS
Table 6-16 System Initialization by Phase 1 Restart [Procedure #5]
ACTION7SEG LED/OPE LAMP/KEY
SETTINGS
START
CPU OPE lamp on the DSP of
active CPU light steadily green.
(IMG0-3 lamps flash.)
IMG0 lamp on the DSP of mate
CPU flashes green.
CPU OPE and IMGX lamps on
both DSP go OFF.
STATUS LED (right) on
the CPU is ON.
STATUS LED (right) on
the DSP of CPU is ON.
CPU OPE lamp on the DSP of
active CPU lights steady green.
(IMG0-3 lamps...")
NDA-24238 CHAPTER 6 Page 483 Revision 3.0 SYSTEM OPERATIONS Table 6-16 System Initialization by Phase 1 Restart [Procedure #5] ACTION7SEG LED/OPE LAMP/KEY SETTINGS START CPU OPE lamp on the DSP of active CPU light steadily green. (IMG0-3 lamps flash.) IMG0 lamp on the DSP of mate CPU flashes green. CPU OPE and IMGX lamps on both DSP go OFF. STATUS LED (right) on the CPU is ON. STATUS LED (right) on the DSP of CPU is ON. CPU OPE lamp on the DSP of active CPU lights steady green. (IMG0-3 lamps...