NEC Neax 2400 Imx Installation Manual

NDA-24234 CHAPTER 7
Page 371
Revision 3.0
WORK AFTER INSTALLATION TESTS
Figure 7-6   Rear Cover Mounting Method (FANU)
FA N U
REAR COVER
SCREW
SCREW
FA N U
REAR COVER 

CHAPTER 7 NDA-24234
Pag e 37 2
Revision 3.0
WORK AFTER INSTALLATION TESTS
Figure 7-7   Front Cover Mounting Method (BASEU+LPR+PIM0)
FRONT COVER 

NDA-24234 CHAPTER 7
Page 373
Revision 3.0
WORK AFTER INSTALLATION TESTS
Figure 7-8   Front Cover Mounting Method (PIM)
Mount the Front Cover onto the module using screws.
FRONT COVERSCREW
Note:The Front Cover can be set to open
to either the “left side” or “right
side”. The Front Cover shown in
this figure is set to open to the left
side. When it is to be set to open to
right side, mount the Front Cover
onto the frame by setting the respec-
tive hinges on the left side of the
frame and the Front Cover. 

CHAPTER 7 NDA-24234
Pag e 37 4
Revision 3.0
WORK AFTER INSTALLATION TESTS
Figure 7-9   Front Cover Mounting Method (FANU)
FA N U
FRONT COVER C(U) 

NDA-24234 CHAPTER 7
Page 375
Revision 3.0
WORK AFTER INSTALLATION TESTS
4. ATTACHMENT OF INTER-FRAME BRACKETS
This section covers how to attach inter-frame brackets between the cabinets.
Figure 7-10   Locations of Inter-frame Brackets
TOPU
PIM1 IMG0TOPU
PIM1 IMG1TOPU
PIM1 IMG2TOPU
PIM1 IMG3
Inter-frame Brackets
BASEU TSWM BASEU
BASEU LPM
BASEUDUMMY DUMMY PIM0
PIM0PIM0 PIM0 FANU FANU FANU FANUPIM2 PIM2 PIM2 PIM2PIM3 PIM3 PIM3 PIM3
When the maximum four-IMG configuration is adopted, the inter-frame...

CHAPTER 7 NDA-24234
Pag e 37 6
Revision 3.0
WORK AFTER INSTALLATION TESTS

STEP 6: Referring to the Figure 7-11 through Figure 7-11, fix the brackets (E) between the modules.
Figure 7-11   How to Attach Inter-frame Brackets
STEP 7: Referring to Figure 7-11 and Figure 7-11, fix the brackets (A) with the screws.
STEP 8: Referring to Figure 7-11 and Figure 7-11, fix the brackets (B) with the screws.
Bracket (E) (PIM)
(LPM/PIM) Dedicated screws for 
inter-module stabilization.
Note
Note:These screws are...

NDA-24234 CHAPTER 7
Page 377
Revision 3.0
WORK AFTER INSTALLATION TESTS
Figure 7-11  How to Attach Inter-frame Brackets (Continued)
SL-C.P.B.M.S x 4 x 8 x 3GF
Bracket (D)
Bracket (A)
Bracket (A)
Bracket (B)Bracket (B)
Bracket (B)
Bracket (F)
Bracket (F)(BASEU)(FANU) (PIM)
PL-C.P.I.M.S x 4 x 10 x 15 BF
P.I.WA x 4 x 15 BF
#2.ST.L.WA x 4 x 15 BF
A.HEX.I.N. x 4 x 15 BF 

CHAPTER 7 NDA-24234
Pag e 37 8
Revision 3.0
WORK AFTER INSTALLATION TESTS
Figure 7-11  How to Attach Inter-frame Brackets (Continued)
STEP 9: Referring to Figure 7-11 and Figure 7-11, fix the brackets (D) with the screws.
STEP 10: Referring to Figure 7-11 and Figure 7-11, fix the brackets (F) with the screws.
Bracket (E)Bracket (D)
Bracket (A)Bracket (A)
Bracket (A)
Bracket (B)
Bracket (A) Bracket (A)
Bracket (A)
Bracket (B)
Bracket (F)
Bracket (F) Bracket (B) Bracket (A)
Bracket (A)
Bracket (A)
Bracket...

NDA-24234 CHAPTER 7
Page 379
Revision 3.0
WORK AFTER INSTALLATION TESTS
5. SITE CLEANING
Upon completion of the works described in Section 1 to 4 of this Chapter, execute or confirm the following
items.
Restore the cross connections arranged for test purposes to their original conditions.
Clean around the Module Group and the MDF.
Collect and organize all test equipment, tools, etc. used during the installation tests.
Dispose of dust, trash, etc. 

CHAPTER 7 NDA-24234
Pag e 38 0
Revision 3.0
This page is for your notes.