NEC Neax 2400 Imx Hotel Office Data Specification
Here you can view all the pages of manual NEC Neax 2400 Imx Hotel Office Data Specification. The NEC manuals for Communications System are available online for free. You can easily download all the documents as PDF.
Page 31
NDA-24288 CHAPTER 2 Page 19 Revision 1.0 ASSIGNMENT The following steps explain how to create a PBX Alias in IMX MAT. 1. From the PBX menu, select Configuration to open the PBX Administration dialog box. 2. Enter a name for the PBX Alias in the PBX Alias box. Note:You can also define a PBX Alias by selecting the default NEXT-PBX or by modifying any other previously defined Alias from the list in the PBX Alias box. If you select a PBX Alias from the list, its related information displays in the...
Page 32
CHAPTER 2 NDA-24288 Page 20 Revision 1.0 ASSIGNMENT If you start up the system when the PBX is in DM Clear Restart mode, (the SENSE Switch is set to the default value “1”), you must verify that the IMX MAT baud rate is set to 4800 to ensure that the system runs properly. 6.2.4 Logging in to IMX After you have defined the PBX Alias in IMX MAT and the TCP/IP network connection in Windows, you are ready to Log in to IMX. The Login operation allows you to select the target IMX (node) with which you are...
Page 33
NDA-24288 CHAPTER 2 Page 21 Revision 1.0 ASSIGNMENT 7. To perform additional decimal to hexadecimal conversions, make sure that Dec is selected and repeat the previous steps. 1. Type ASYDL in the Run Command text box. 2. Press Enter. 3. Type 1 in the SYS text box and press Enter. 4. Type 513 in the INDEX text box and press Enter. 5. Type 01H in the DATA text box and press Enter. 6. Type Y in the WRT? text box and press Enter. 7. Type 1 in the SYS text box and press Enter. 8. Type 514 in the INDEX text...
Page 34
CHAPTER 2 NDA-24288 Page 22 Revision 1.0 ASSIGNMENT 26. Type Y in the WRT? text box and press Enter. Note:The following steps explain how to assign the default SubNet Mask. 27. Type 1 in the SYS text box and press Enter. 28. Type 519 in the INDEX text box and press Enter. 29. Type FF in the DATA text box and press Enter. 30. Type Y in the WRT? text box and press Enter. 31. Type 1 in the SYS text box and press Enter. 32. Type 520 in the INDEX text box and press Enter. 33. Type FF in the DATA text box and...
Page 35
NDA-24288 CHAPTER 2 Page 23 Revision 1.0 ASSIGNMENT Once the data has been saved from the IMX internal hard disk to the IMX MAT’s hard disk, you can use standard operating functions to copy the saved data to floppy disks, zip drive disks, writable CD-ROM drives, or any other type of external storage devices supported by the operating system. Doing a three phase backup (save) ensures the IMX Office data is safe and always available for restoration in case of an IMX data memory loss, hard disk failure, or...
Page 36
CHAPTER 2 NDA-24288 Page 24 Revision 1.0 ASSIGNMENT Once you have made the appropriate selections and clicked Start, you can scroll down and view the data being saved in the Processing Status Log window. This section of the window is divided into the sections Action/Information, Direction, Data Type, and Time Stamp. The Action/Information column shows the Action being taken (saving or restoring), or the Information being saved. The Direction column shows where the data is being saved or restored (in this...
Page 37
NDA-24288 CHAPTER 2 Page 25 Revision 1.0 ASSIGNMENT The log file maintains a history trail of operations and actions requested by the user. This log file continues to grow as each command is run and interactions with the IMX PBX are transacted. It doesn’t matter whether the operation is a query, a change, a create, or a delete, the operation, its data, and its status will always be logged (added to this log file). The log file can be viewed any time by selecting it from the command’s view menu selection....
Page 38
CHAPTER 2 NDA-24288 Page 26 Revision 1.0 ASSIGNMENT 7. Data Assignment Flow Chart This section shows the data assignment flow chart for IMX. The standard data assignment is illustrated on the following flow charts. Local Node/Stand Alone Network Control Node Hotel Command 7.1 Local Node/Stand Alone The following flow chart shows the data assignment for MAT when operated in a Local Node/Stand Alone environment. 1. Local Node/Stand Alone Figure 2-21 Local Node/Stand Alone Data Flow Assignment Flow...
Page 39
NDA-24288 CHAPTER 2 Page 27 Revision 1.0 ASSIGNMENT Figure 2-21 Local Node/Stand Alone Data Assignment Flow Chart (2/2) TrunkATRKMBTKAMATASATATGLAAKP ATRKMBTK Service CCIS No. 7 ISDN ASHPASHCASHUAUCDAUOGAUADACPGACPE AISAAISDASGDASIDACFSASLU1ASLU2 ACSAACSIANCDATASAEKDAANDAANDE ASPDAATCACFO ARPCARDN ACDDACNPACNDAFCPACBCAVTCAVTL ATT : Internal Trunk External TrunkORT / IRT / SND / CFT:ACOC APAD AAED ADPC ADPCACSC ACSC AAEDL ACIC1 ACIC1 ARTI ACIC2 ARTI ARTDATRKMBTKPSTN : TIE LINE : DAT...
Page 40
CHAPTER 2 NDA-24288 Page 28 Revision 1.0 ASSIGNMENT 2. Network Control Node Figure 2-22 Network Control Node Data Assignment Flow Chart (1/2) ATIM System BaseASYDASYDLASYDNAUNTAIOCASTDAOFCAFMUALRTN AMNDARNP ANNDASTPAOSPARNP ASTPLAOSPL ASTPNAOSPN ACMOATCPAFRSAOPRAADCASDC AFRSNAOPRNAADCN AMNDARNP AUNE AUNELAMND ALDNASTPAISPARAC ARSCARRCATDP ATDPNAARP ATDPL AARPL AARPNAPCRAEFR ASFC ARSCN ARRCNACFRATNRAABD ANPD ASPA ANPDL ASPALSRV SRVSTN SSC SSC/SSCA, etc. TELNSys1 Index 512 - 1535 Sys1 Index 0 - 511 ,...