NEC Neax 2400 Imx Feature Programming Manual

NEAX2400 IMX Feature Programming Manual
ND-70184 (E), Issue 3
Page xxv
F-12Flexible Numbering of Stations - CCISXX→→X
H-10D
Hands-free Answerback - D
term - CCISX—→—X
H-11House Phone - CCISXX→→X
H-12Hotline - CCISXN→XX
I-16Incoming Call Identification - CCISXX→→X
I-17Individual Attendant Access - CCISXX→→X*
I-18Inter-Position Transfer - CCISX—→——
L-25Look Ahead Routing - CCISXX→→X
L-29LDN Night Connection - CCISXX→→X
M-34Message Reminder - CCISXX→→N
M-34D
Message Reminder - D
term - CCISXX→→N
M-35Message...

NEAX2400 IMX Feature Programming Manual
Page xxviND-70184 (E), Issue 3
M-67Message Center Interface - CCISXX E→X
N-15Night Connection - Fixed - CCISXX→→X
N-16Night Connection - Flexible - CCISXX→→X
N-37Name Display - System - CCISXX→→X
N-46Number Portability - CCISXX X
O-11Off-Hook Queuing - CCISXX→→X
O-12Outgoing Trunk Queuing - CCISXX→→N
P-28Paging Access - CCISXX→→X
R-22Restriction from Outgoing Calls - CCISXX→→X
S-52Serial Call - CCISXX→→N
S-53D
Service Display - D
term - CCISX—→—N
S-54Simultaneous...

NEAX2400 IMX Feature Programming Manual
ND-70184 (E), Issue 3
Page xxvii
Note 1:* This feature is available on the condition that the NEAX2000 IVS is the satellite office.
Note 2:** Only 2 modes of Day/Night are available for NEAX2000 IVS.
Note 3:Telephone numbers should be used for activating CCIS services through FCCS groups and a NEAX2000 IVS.
T-27Trunk Answer from Any Station - CCISXX→→X
U-5Uniform Numbering Plan - CCISXX→→X
V-7Voice Call - CCISXX→→X
NEAX2400 IMX CCIS Features (Continued)
LEGEND
X –...

NEAX2400 IMX Feature Programming Manual
Page xxviiiND-70184 (E), Issue 3
This page is for your notes. 

NEAX2400 IMX Feature Programming Manual
ND-70184 (E), Issue 3
Page 1
Attendant Camp-On with Tone Indication A-1
A-1  Attendant Camp-On with Tone Indication
General Description
This feature permits the Attendant, when a desired station is busy, to hold an incoming call in a special waiting
mode. The Attendant sends a distinctive Camp-On Tone Indication to the busy station. When that station becomes
idle, it is automatically rung and connected to the waiting trunk party upon answering.
Operating Procedure...

NEAX2400 IMX Feature Programming Manual
Page 2ND-70184 (E), Issue 3
A-1 Attendant Camp-On with Tone Indication
Service Conditions (cont’d)
CALL WAITING - ORIGINATING [C-31]
CALL WAITING - TERMINATING [C-12]
CONSULTATION HOLD - ALL CALLS [C-17, C-17D]
DATA LINE SECURITY [D-12]
DATA PRIVACY ON DEMAND [D-17]
DIAL ACCESS TO ATTENDANT [D-2]
EXCLUSIVE HOLD - D
term[E-4D]
EXECUTIVE RIGHT-OF-WAY [E-1, E1D]
NON-EXCLUSIVE HOLD - D
term[N-7D]
OFF-HOOK QUEUING [O-7]
OUTGOING TRUNK QUEUING [O-2, O-2D]
PRIVACY - D...

NEAX2400 IMX Feature Programming Manual
ND-70184 (E), Issue 3
Page 3
Attendant Camp-On with Tone Indication A-1
Interactions
1. System Data 2, Index 2, Bit 5 will enable ATTENDANT LOOP RELEASE [A-6], which allows 12 calls
to be camped-on to stations by Attendant Console.
2. The Attendant Console must first be provided.
3. Route Restrictions disallowing a call to terminate at a station will also disallow ATTENDANT CAMP-
ON.
4. STATION HUNTING [S-7, 8, 9] and UNIFORM CALL DISTRIBUTION [U-1] take precedence...

NEAX2400 IMX Feature Programming Manual
Page 4ND-70184 (E), Issue 3
A-2 Attendant-Controlled Conference
A-2 Attendant-Controlled Conference
General Description
This feature permits the Attendant to establish a conference among as many as eight parties. The conferees may
consist of any combination of stations and/or trunks, whether inside or outside parties.
Operating Procedure
To activate ATTENDANT CONTROLLED CONFERENCE:
1. Station calls Attendant to request conference.
2. Attendant connects a party to...

NEAX2400 IMX Feature Programming Manual
ND-70184 (E), Issue 3
Page 5
Attendant-Controlled Conference A-2
Programming (cont’d)
TEC: Telephone Class (1-31) 
1: DP (10pps) 
2: PB 
3: DP/PB
12: D
term
13: Data terminal Via Dterm 
14: Hot Line
15: CAS Line
16: Data Terminal Via Data Module 
18: Virtual Circuit
23: ISDN Terminal
26: VPS
27: Eight Conference Equipment
RSC:  Route Restriction Class (0-15) 
For assignment of RSC, ARSC command.
SFC: Service Feature Class (0-15) 
For assignment of SFC, ASFC...

NEAX2400 IMX Feature Programming Manual
Page 6ND-70184 (E), Issue 3
A-3 Attendant Console
A-3 Attendant Console
General Description
The ATTENDANT CONSOLE operates on a switched loop basis. Six Attendant loops terminate at each console
via the associated position circuit. The Attendant can answer, originate, hold, extend and re-enter calls through each
loop. The number of calls may be effectively increased to 12 through use of the ATTENDANT LOOP RELEASE
[A-6] feature.
Operating Procedure
Refer to the...