NEC Neax 2000 Ivs Matworx 32 User Guide

							MATWorX 32 User’s Guide
Page 64 NDA-24215 Revision 1.0
Extended Command Set
This page is for your notes. 
						

							Error Codes
MATWorX 32 User’s Guide
NDA-24215 Revision 1.0 Page 65
Appendix B Error Codes
The following error codes are generated by 
MATWorX 32 and displayed in the Error text box on 
the MATWorX 32 Taskbar. These messages indicate 
processing errors generated in the PBX or the PAM 
while performing tasks within MATWorX 32. 
All error codes contain five digits, the first two 
beginning with 10. The remaining three digits are 
divided into four series beginning with 100, 200, 300, 
or 400.
•Series 100 errors are generated by the PBX 
Interface Class, indicating an error occurred inside 
the PBX while performing a requested operation.
•Series 200 errors are currently not implemented.
•Series 300 errors are generated by the PDQ Comm 
Class, indicating a communication error occurred 
while talking with the PBX.
•Series 400 errors are generated by the Save/Load/
Verify (SLV) Class, indicating an error occurred 
while performing a save, load, or backup 
operation.
Series 100 Error Codes
No Error (Message 10100)
Object Not Registered (Error 10101)
Port Not Open (Error 10102)
Port Not Selected (Error 10103)
Failed to Connect (Error 10104)
Data Error (Error 10105)
Digit Error (Error 10106)
Time Out (Error 10107)
Checksum Error (Error 10108)
No File Defined (Error 10109) 
						

							MATWorX 32 User’s Guide
Page 66 NDA-24215 Revision 1.0
Error Codes
File Error (Error 10110)
Read Header Error (Error 10111)
Write Header Error (Error 10112)
Data Not Found (Error 10113)
Wait Busy Now (Error 10114)
Verify Failed (Error 10115)
Load Failed (Error 10116)
Code Not Used (Error 10117)
Assigned Already (Error 10118)
Invalid Area Number (Error 10119)
PBX Error (Error 10120)
PBX Busy (Error 10121)
Handshake Time Out (Error 10122)
PBX Initialize Error (Error 10123)
Hardware Error (Error 10124)
Wrong Error (Error 10125)
Not Assigned (Error 10126)
Listup Not Supported (Error 10140) Indicates you 
tried to use a command to listup data, and the 
command is not used by MATWorX 32 to generate 
listup data or the command being used is not supported 
by the connected PBX.
User Cancelled (Error 10150)
Series 200 Error Codes (currently not implemented)
No Error (Message 10200)
Object Not Registered (Error 10201)
Port Not Open (Error 10202)
Port Not Selected (Error 10203)
Failed to Connect (Error 10204)
Data Error (Error 10205) 
						

							Error Codes
MATWorX 32 User’s Guide
NDA-24215 Revision 1.0 Page 67
Digit Error (Error 10206)
Time Out (Error 10207)
Checksum Error (Error 10208)
No File Defined (Error 10209)
File Error (Error 10210)
Read Header Error (Error 10211)
Write Header Error (Error 10212)
Data Not Found (Error 10213)
Wait Busy Now (Error 10214)
Verify Failed (Error 10215)
Load Failed (Error 10216)
Code Not Used (Error 10217)
Assigned Already (Error 10218)
Invalid Area Number (Error 10219)
PBX Error (Error 10220)
PBX Busy (Error 10221)
Handshake Time Out (Error 10222)
PBX Initialize Error (Error 10223)
Hardware Error (Error 10224)
Wrong Error (Error 10225)
Not Assigned (Error 10226)
Listup Not Supported (Error 10240)
User Cancelled (Error 10250)
Series 300 Error Codes
No Error (Message 10300)
Object Not Registered (Error 10301)
Port Not Open (Error 10302)
Port Not Selected (Error 10303) 
						

							MATWorX 32 User’s Guide
Page 68 NDA-24215 Revision 1.0
Error Codes
Failed to Connect (Error 10304)
Data Error (Error 10305)
Digit Error (Error 10306)
Time Out (Error 10307)
Checksum Error (Error 10308)
No File Defined (Error 10309)
File Error (Error 10310)
Read Header Error (Error 10311)
Write Header Error (Error 10312)
Data Not Found (Error 10313)
Wait Busy Now (Error 10314)
Verify Failed (Error 10315)
Load Failed (Error 10316)
Code Not Used (Error 10317)
Assigned Already (Error 10318)
Invalid Area Number (Error 10319)
PBX Error (Error 10320)
PBX Busy (Error 10321)
Handshake Time Out (Error 10322)
PBX Initialize Error (Error 10323)
Hardware Error (Error 10324)
Wrong Error (Error 10325)
Not Assigned (Error 10326)
Listup Not Supported (Error 10340) Indicates you 
tried to use a command to listup data, and the 
command is not used by MATWorX 32 to generate 
listup data or the command being used is not supported 
by the connected PBX.
User Cancelled (Error 10350) 
						

							Error Codes
MATWorX 32 User’s Guide
NDA-24215 Revision 1.0 Page 69
Series 400 Error Codes
No Error (Message 10400)
Object Not Registered (Error 10401)
Port Not Open (Error 10402)
Port Not Selected (Error 10403)
Failed To Connect (Error 10404)
Data Error (Error 10405)
Digit Error (Error 10406)
Time Out (Error 10407)
Checksum Error (Error 10408)
No File Defined (Error 10409)
File Error (Error 10410)
Read Header Error (Error 10411)
Write Header Error (Error 10412)
Data Not Found (Error 10413)
Wait Busy Now (Error 10414)
Verify Failed (Error 10415)
Load Failed (Error 10416)
Code Not Used (Error 10417)
Assigned Already (Error 10418)
Invalid Area Number (Error 10419)
PBX Error (Error 10420)
PBX Busy (Error 10421)
Handshake Time Out (Error 10422)
PBX Initialize Error (Error 10423)
Hardware Error (Error 10424)
Wrong Error (Error 10425)
Not Assigned (Error 10426) 
						

							MATWorX 32 User’s Guide
Page 70 NDA-24215 Revision 1.0
Error Codes
Listup Not Supported (Error 10440) Indicates you 
tried to use a command to listup data, and the 
command is not used by MATWorX 32 to generate 
listup data or the command being used is not supported 
by the connected PBX.
User Cancelled (Error 10450)  
						

							Directory and File Structure
MATWorX 32 User’s Guide
NDA-24215 Revision 1.0 Page 71
Appendix C Directory and File 
Structure
Appendix C provides information about the directory 
structure, files, and file locations of the MATWorX 32 
suite of applications installed on your computer.
Note:
If you changed the destination directory 
or program folder name during the 
installation process, the information 
below may be different on your machine.
MATWorX 32 and related applications use many 
different files. The information here can be beneficial 
for troubleshooting if one or more files should 
accidentally become lost, corrupted, or renamed. 
Figure C-1 displays the directories and subdirectories 
that contain the MATWorX 32 application files. 
Figure C-1 Directory and File Structure 
						

							MATWorX 32 User’s Guide
Page 72 NDA-24215 Revision 1.0
Directory and File Structure
The following list represents the directories and 
related subdirectories included in the MATWorX 32 
suite of applications.
Caution:
Do not rename any of the MATWorX 
32 files, subdirectories, or 
directories once they have been 
installed on your computer.
WorX32 - main directory where all subdirectories are 
located (the name of this directory may be different if 
you changed it during the installation)
AddIns - 
where Add-In files are located
Configwiz - where PBX Configuration Wizard 
files are located
DESIWorX - where DESIWorX label program 
files are located
Db - subdirectory of DESIWorX where 
DESIWorX database files are located
Lan
guage - where language database files are 
located
MATWorX - 
where MATWorX program files and 
subdirectories are located
Help - subdirectory of MATWorX where 
Add-In Help files are located
Reader - subdirectory of MATWorX where 
Adobe Acrobat Reader files and MATWorX 
32 supporting documentation are located
Fonts - subdirectory of Reader where 
Adobe Acrobat Reader fonts are located
PFM - subdirectory of Fonts where 
additional Adobe Acrobat Reader 
fonts are located
Hel
p - subdirectory of Reader where the 
Adobe Acrobat Reader Help file is 
located 
						

							Directory and File Structure
MATWorX 32 User’s Guide
NDA-24215 Revision 1.0 Page 73
Pam - where PAM program files are located
Reports - where report templates are located
SETWorX - where Scheduler program files are 
located
Userdat - where database files are located