Home > NEC > Communications System > NEC Neax 2000 Ivs Matworx 32 User Guide

NEC Neax 2000 Ivs Matworx 32 User Guide

    Download as PDF Print this page Share this page

    Have a look at the manual NEC Neax 2000 Ivs Matworx 32 User Guide online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1168 NEC manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.

    							MATWorX 32 User’s Guide
    Page 14 NDA-24215 Revision 1.0
    MATWorX 32 Overview
     Clicking the What’s This? button enables you 
    to click on a field or button in a dialog to display 
    What’s This Help for the item.
     Clicking the OK button saves changes 
    and closes the dialog. 
     Clicking the Lookup Data button 
    replaces the listed data with the most current data 
    contained in the PBX.
     Clicking the Cancel Data button stops 
    the lookup process. Data replaced during the lookup 
    process will remain changed. 
     Clicking the Update Data button saves 
    the changes on the dialog to the PBX.
     Clicking the Hide Dialog button hides 
    the Add-In dialog from view, but leaves it loaded in 
    your PC’s memory so it can appear quickly if you 
    launch it again. All data is retained until you close the 
    dialog.
     Clicking the Print Data button 
    launches the 
    Print Preview dialog where you can 
    preview a report before printing. You can then click 
    the 
    Print Data button to print the displayed data to 
    your default printer.
     Clicking the Zoom button on the 
    Print Preview 
    dialog enables you to zoom in and out on a report. 
    						
    							MATWorX 32 Overview
    MATWorX 32 User’s Guide
    NDA-24215 Revision 1.0 Page 15
     Clicking the Export button on the 
    Print 
    Preview dialog enables you to save and export the 
    displayed report to a file.
     Clicking the Email button on the 
    Print Preview 
    dialog enables you to email the report directly from 
    MATWorX 32 if your email system supports MAPI.
     Clicking the Delete Data button clears 
    the displayed data on the dialog. It does not clear the 
    data from the PBX.
     Clicking the Add button enables you to 
    add an Add-In to the MATWorX 32 Taskbar. Refer to 
    Chapter 6 “Add-Ins” for more information. 
     Clicking the Remove button enables 
    you to remove an Add-In from the MATWorX 32 
    Taskbar. Refer to Chapter 6 “Add-Ins” for more 
    information.
     Clicking the Clear Grid button completely 
    clears the displayed grid, but does not delete the 
    information from the database.
     Clicking the Delete Grid button clears 
    the grid and deletes the information from the database. 
    						
    							MATWorX 32 User’s Guide
    Page 16 NDA-24215 Revision 1.0
    MATWorX 32 Overview
     Clicking the Reset PBX button resets the 
    PBX. A PBX reset is required before an update can 
    take effect. Note, if you reset the PBX, all existing call 
    connections will end. Also, if you are connected to the 
    PBX through a direct connection, your connection will 
    be lost, but will be automatically reconnected.
     Clicking the Close button disregards 
    any changes not already sent to the PBX and closes the 
    dialog.
     Clicking the PBX Configuration 
    Wizard button launches the wizard.
     Clicking the Setup button displays an 
    easy way to determine your modem’s Initialization 
    and Termination strings. 
    						
    							MATWorX 32 Overview
    MATWorX 32 User’s Guide
    NDA-24215 Revision 1.0 Page 17
    Printing a Report
    The MACH Script Editor, Scheduler, and several Add-
    Ins enable you to print reports and listup data by 
    clicking the 
    Print Data button. The 
    Print Preview 
    dialog (Figure 2-2) automatically displays so you can 
    preview the report before printing. 
    Figure 2-2 Print Preview Dialog
    You can use the 
    Print Preview dialog to:
    uPrint the displayed report by clicking the 
    Print 
    Data button.
    uZoom in and out on the report by clicking the 
    Zoom button.
    uSave and export the displayed report to a file.
    uEmail the report directly from within 
    MATWorX 32 if your email system supports 
    MAPI. 
    						
    							MATWorX 32 User’s Guide
    Page 18 NDA-24215 Revision 1.0
    MATWorX 32 Overview
    This page is for your notes. 
    						
    							Installing MATWorX 32
    MATWorX 32 User’s Guide
    NDA-24215 Revision 1.0 Page 19
    Chapter 3 Installing MATWorX 32
    In this chapter you learn about the following:
    uMATWorX 32 hardware and software “system” 
    requirements
    uMATWorX 32 installation instructions for 
    Windows 95 and NT 4.0 or higher
    System Requirements
    MATWorX 32 requires an IBM or compatible PC 
    running Microsoft Windows 95 or NT 4.0 or higher 
    and a NEAX2000 IVS PBX with 1000 series software 
    or higher.
    Table 3-1  System Requirements
    Minimum Requirements Recommended
    486/66MHz processor Pentium 166MHz processor
    16MB RAM for Windows 95
    32MB RAM for Windows NT32MB RAM
    50MB available hard-disk 
    space before installation75MB available hard-disk 
    space or more before 
    installation
    SVGA monitor with 800 x 600 
    resolution15” or larger SVGA monitor 
    with 1024 x 768 resolution
    CD-ROM drive
    Valid NEAX2000 IVS hardware connection 
    (direct serial or modem)
    Mouse 
    						
    							MATWorX 32 User’s Guide
    Page 20 NDA-24215 Revision 1.0
    Installing MATWorX 32
    MATWorX 32 Installation Instructions
    To install MATWorX 32 for the first time, or to return 
    to Setup later to add optional features or Help files you 
    didn’t install the first time, you must use the 
    installation CD included in your MATWorX 32 
    package. You must run Setup from Windows.
    Important:Be sure to close all
     Windows programs 
    and screen savers that are running and 
    disable any virus detection programs 
    before using the Setup program.
    The following procedure walks you through the 
    installation of MATWorX 32. The Setup consists of a 
    series of dialogs that supply you with default answers 
    to questions regarding the installation of files to your 
    hard disk. To accept the default answers, click the 
    Next button. To make changes, click the 
    Browse 
    button and select a different directory, then click 
    OK 
    to return to the dialog box.
    Note:The following procedure assumes you are 
    starting the Setup program from your 
    computer’s CD-ROM drive 
    D:. If you start 
    from a different drive, substitute the letter of 
    that drive in this procedure.
    1. Launch Microsoft Windows 95 or NT version 4.0 
    or higher on your computer.
    2. Place the MATWorX 32 CD in the CD-ROM 
    drive. 
    						
    							Installing MATWorX 32
    MATWorX 32 User’s Guide
    NDA-24215 Revision 1.0 Page 21
    3. Select 
    Run from the 
    Start taskbar. A dialog 
    similar to the following displays (Figure 3-1).
    Figure 3-1 Run Dialog
    4. Type D:\Setup in the 
    Open text box and click 
    OK. The 
    MATWorX Install dialog displays 
    (Figure 3-2).
    Figure 3-2 MATWorX Install Dialog 
    						
    							MATWorX 32 User’s Guide
    Page 22 NDA-24215 Revision 1.0
    Installing MATWorX 32
    5. Click Next. The 
    Welcome dialog displays 
    (Figure 3-3).
    Figure 3-3 Welcome Dialog
    6. Read the information in the 
    Welcome dialog, 
    then click Next. The 
    Software License 
    A
    greement dialog displays (Figure 3-4). 
    Figure 3-4 Software License Agreement 
    						
    							Installing MATWorX 32
    MATWorX 32 User’s Guide
    NDA-24215 Revision 1.0 Page 23
    7. Read the information in the 
    Software License 
    A
    greement dialog, then click Ye s to accept the 
    terms of the license agreement. The 
    Readme 
    Information dialog displays (Figure 3-5). 
    Figure 3-5 Readme Information Dialog
    8. Read the information in the 
    Readme 
    Information dialog, then click Next. The 
    Choose Destination Location dialog displays 
    (Figure 3-6). 
    Figure 3-6 Choose Destination Location Dialog 
    						
    All NEC manuals Comments (0)

    Related Manuals for NEC Neax 2000 Ivs Matworx 32 User Guide