NEC Neax 2000 Ivs Ccis Features And Specifications
Here you can view all the pages of manual NEC Neax 2000 Ivs Ccis Features And Specifications. The NEC manuals for Communications System are available online for free. You can easily download all the documents as PDF.
Page 101
NEAX2000 IVS CCIS Features and Specifications Page 90NDA-24159, Issue 2 Station-to-Station Calling - Operator Assistance - CCIS General Description This feature allows a station user to call another station in the CCIS network, with the assistance of an Attendant Console operator. Operating Procedure To place a Station-To-Station Call through the Attendant Console: 1. Lift the handset; receive dial tone. 2. Dial the operator access code. 3. Relay the desired station number to the Attendant. 4. The...
Page 102
NEAX2000 IVS CCIS Features and Specifications NDA-24159, Issue 2 Page 91 Toll Restriction - 3/6 Digits - CCIS General Description This feature allows the NEAX2000 IVS to be programmed to restrict outgoing calls, through CCIS, according to specific Area and/or Office Codes. This restriction is determined on the basis of a three-digit Area Code or six-digit Area and Office Code numbering plan. Operating Procedure No manual operation is required. Service Conditions 1. The programmed restriction pattern can...
Page 103
NEAX2000 IVS CCIS Features and Specifications Page 92NDA-24159, Issue 2 Trunk Answer From Any Station - CCIS General Description This feature allows any station, not restricted from incoming calls, to answer incoming calls when the network is in Night mode. When this feature is activated, incoming exchange network calls will activate a common alert Trunk Answer From Any Station (TAS) signal at the customer premises. By dialing a specified code, any station may answer the call and extend it to any other...
Page 104
NEAX2000 IVS CCIS Features and Specifications NDA-24159, Issue 2 Page 93 Trunk-to-Trunk Restriction - CCIS General Description This feature allows trunk-to-trunk tandem restriction at counterpart’s sending of caller’s information (e.g., caller is a trunk) through the CCIS Network. Case 1: A tandem connection at the following office can be restricted by Trunk Restriction Class of Trunk A and Outgoing Connection Restriction data of Trunk B. Case 2: When Station B transfers an Incoming Call through CCIS to...
Page 105
NEAX2000 IVS CCIS Features and Specifications Page 94NDA-24159, Issue 2 Uniform Numbering Plan - CCIS General Description In a CCIS network, a Uniform Numbering Plan enables a station user to call any other station in the network. Two alternative numbering plans are provided. In the first plan, the station user dials a three-, four- or five-digit station number. The office in which the called station is located is identified by either the first digit or the first two digits of the station number. In the...
Page 106
NEAX2000 IVS CCIS Features and Specifications NDA-24159, Issue 2 Page 95 Uniform Numbering Plan - CCIS 54XX 3XXX • 3,4 or 5-Digit 4XXX 51XX52XX 6XXXX Public Main Office Tributary OfficeSatellite Office Public • First one or two digits Station Numbers indicate the Office Location Network Network Main Office XXXX XXXX • 1,2 or 3-Digit Office Code XXXX XXXXXXXX XXXX 222 244233 OFFICE CODE Public Tributary OfficeSatellite Office PublicNetwork Network • 2,3 or 4-Digit Office Code Station...
Page 107
NEAX2000 IVS CCIS Features and Specifications Page 96Addendum-003 NDA-24159, Revision 2.3 July, 1998 Voice Call - CCIS General Description This feature provides a voice path, through the CCIS network, between a Multiline Terminal in one office and a Multiline Terminal in another office. This path is established from the calling party to the called party’s built- in speaker. If the called party’s MIC lamp is on, the called party can converse hands-free. Operating Procedure From a Multiline Terminal to...
Page 108
NEAX2000 IVS CCIS Features and Specifications NDA-24159, Revision 2.3 Addendum-003 Page 97July, 1998 Voice Mail Integration - CCIS General Description This feature allows any station user in the CCIS Network to utilize the Voice Mail System (VMS) with the Mes- sage Center Interface (MCI). Operating Procedure To record a message into the VMS: 1. Go off-hook and receive Dial Tone. 2. Dial the voice mail station number and receive Ringback Tone. 3. Follow the instructions given by the VMS. To retrieve a...
Page 109
NEAX2000 IVS CCIS Features and Specifications Page 98Addendum-003 NDA-24159, Revision 2.3 July, 1998 Voice Mail Integration - CCIS 2. Dial the desired station number; receive Ringback Tone. The LCD displays: [ FDA xxx] VMS: Voice mail station number 3. Follow the instructions given by the VMS. Service Conditions 1. Rotary telephones are denied access to the VMS. 2. A station in either NEAX2000 IVS or NEAX2400 may set call forward outside to the VMS. Any calls for- warded to the VMS will be...
Page 110
ADDENDUM-001 ADDENDUM-002 ADDENDUM-003 ADDENDUM-004 DATE NOVEMBER, 1996 DATE NOVEMBER, 1997 DATE JULY, 1998 DATE ADDENDUM-005 ADDENDUM-006 ADDENDUM-007 ADDENDUM-008 DATE DATE DATE DATE NEAX2000 IVS CCIS Features and Specifications Addendum Revision Sheet 1/2 NDA-24159 ISSUE 2 PA G E N o .ADD. No. 001 002003 004 005 006 007 008 i ii iii 2.1 2.22.3 iv 2.1 2.2 2.3 v2.3 vi2.3 1 2 3 4 5 6 7 8 9 102.3 112.3 12 13 14 15 162.3 172.3 17-1 2.3 17-22.3 18 192.3 20 2.3 20-12.3 20-22.3 21 222.3 232.3 23-12.3...