NEC Is15-2k Digital Cinema Projector User Manual

page 3.5
iS15-2K Cinema Projector: User Manual 3. Getting started
Adjusting the projected image
To adjust the position of the image on the screen:
•EITHER
on the control panel, press the LENS SHIFT 
    or  buttons,
OR
on the remote control, press CTL and 
POSI LENS together, release,
then press the 
   and  buttons.
To adjust the size of the image on the screen:
•EITHER
on the control panel, press the ZOOM + or ZOOM – buttons,
OR
on the remote control, press CTL with the ZOOM + or ZOOM – buttons.
To...

page 3.6
3. Getting startediS15-2K Cinema Projector: User Manual
Switching the power off
• To switch the projector back into Standby mode, press the POWER button on
the control panel or the POWER OFF button on the remote control for two
seconds.
• The ON/STANDBY indicator on the control panel will change to orange, and
flash on and off.
The display will show the Cooldown timer, which will count down from
300 seconds to zero.
At the end of the cooling period, the projector will go into Standby mode.
•...

4. Controlling the projector
Contents
4. Controlling the projector 1.1
Introduction............................................................................................................................. 1.2
Using the control panel .................................................................................................................................. 1.2
Using the remote control...

page 4.2
4. Controlling the projectoriS15-2K Cinema Projector: User Manual
Introduction
There are three ways to control the projector:
• the buttons and menus available on the control panel;
• the buttons on the remote control
(in conjunction with the menus on the control panel LCD screen);
• a reduced set of menus on a remote computer using a web browser
(with the IP address of the projector typed into the browser address field).
None of the menus are ever displayed on the projection screen.
Using the...

page 4.3
iS15-2K Cinema Projector: User Manual 4. Controlling the projector
Notes
For more information about how
to use the menus, see Using
the menus, later in this section.
For a full listing of all the
menus, see Menu trees, later in
this section.
When using any feature that
requires further menu selection,
you will need to be within view
of the LCD screen on the
control panel.
Using the remote control
Direct Menu selection:
In the Menu trees on the following
pagees, some menus are marked with
a...

page 4.4
4. Controlling the projectoriS15-2K Cinema Projector: User Manual
Using the menus
The menus can be accessed from either the control panel or the remote control,
using the menu selection buttons.
At switch on
The projector will initially be in Standby mode. The ON/STANDBY indicator on the
control panel will show orange, and the LCD screen will show Standby:
• To switch the projector ON from Standby mode, press the POWER button on
the control panel or the POWER ON button on the remote control for...

page 4.5
iS15-2K Cinema Projector: User Manual 4. Controlling the projector
Navigation through the menu trees
• At any time, to see the first item of the Main menu , press the  MENU button.
• To navigate through the Menus and Sub-menus, use the SELECT 
   
ENTER, CANCEL and UNDO buttons, as shown below.
A full listing of all the menus available is given in Menu trees, later in this
section.
Typical menu screen
Press the SELECT 
button or CANCEL
button to close the
Information menu and
return to the...

page 4.6
4. Controlling the projectoriS15-2K Cinema Projector: User Manual
Example: Using the Information menus
• Press the  MENU button on the control panel or on the remote control. The first
item of the Main menu opens:
• Press the SELECT 
 or  buttons to show the sub-menus available:
• Press the SELECT 
 button or the ENTER button, to open one of the menus
for example, the Information menu:
• Press the SELECT 
 button or CANCEL button to close the menu
OR press the SELECT 
 or  buttons to show the...

page 4.7
iS15-2K Cinema Projector: User Manual 4. Controlling the projector
• Press the SELECT  button or CANCEL button to close the menu
OR press the SELECT 
 or  buttons to show the sub-menus available:
• Press the SELECT 
 button or the ENTER button, to open one of the menus
for example, the Firmware menu:
• This is the end of this menu branch.
Press the SELECT 
 button or the CANCEL button to close the menu and work
your way back up the menu tree.
OR press the MENU button to return to the Main Menu....

page 4.8
4. Controlling the projectoriS15-2K Cinema Projector: User Manual
Notes
To see the first item of the Main
menu , press the  MENU
button.
To navigate through the Menus
and Sub-menus, use the
SELECT 
    ENTER,
CANCEL and UNDO buttons,
as shown in Using the menus,
earlier in this section.
Some menus are marked with a
number. To jump directly to
those menus using the remote
control:
1 Press the HELP Direct Menu
selection button.
2 Use the Alpha-numeric keys
to enter the menu number,
including any...