NEC Is15-2k Digital Cinema Projector User Manual

							page 3.5
iS15-2K Cinema Projector: User Manual 3. Getting started
Adjusting the projected image
To adjust the position of the image on the screen:
•EITHER
on the control panel, press the LENS SHIFT 
    or  buttons,
OR
on the remote control, press CTL and 
POSI LENS together, release,
then press the 
   and  buttons.
To adjust the size of the image on the screen:
•EITHER
on the control panel, press the ZOOM + or ZOOM – buttons,
OR
on the remote control, press CTL with the ZOOM + or ZOOM – buttons.
To adjust the focus of the image on the screen:
•EITHER
on the control panel, press the FOCUS + or FOCUS– buttons,
OR
on the remote control, press CTL with the FOCUS + or FOCUS – buttons.
Notes
For more detailed information
about all the touch screen
menus, see the next section:
Using the menus. 
						

							page 3.6
3. Getting startediS15-2K Cinema Projector: User Manual
Switching the power off
• To switch the projector back into Standby mode, press the POWER button on
the control panel or the POWER OFF button on the remote control for two
seconds.
• The ON/STANDBY indicator on the control panel will change to orange, and
flash on and off.
The display will show the Cooldown timer, which will count down from
300 seconds to zero.
At the end of the cooling period, the projector will go into Standby mode.
• Push the main power switch downwards to switch off the power.
• Disconnect the power cable.
Notes
Always allow the lamp to cool
for 5 minutes before:
Switching off the power
Moving the projector
Changing the lamp
Main power
switch 
						

							4. Controlling the projector
Contents
4. Controlling the projector 1.1
Introduction............................................................................................................................. 1.2
Using the control panel .................................................................................................................................. 1.2
Using the remote control ................................................................................................................................ 1.3
Using the alpha-numeric keys...................................................................................................................... 1.3
Using the menus ............................................................................................................................................. 1.4
At switch on .................................................................................................................................................. 1.4
Navigation through the menu trees .............................................................................................................. 1.5
Example: Using the Information menus ....................................................................................................... 1.6
Example: Lens Calibration........................................................................................................................... 1.7
Menu trees ............................................................................................................................... 1.8
Source Select menus ...................................................................................................................................... 1.9
Configuration menus.................................................................................................................................... 1.10
Information menus........................................................................................................................................ 1.14 
						

							page 4.2
4. Controlling the projectoriS15-2K Cinema Projector: User Manual
Introduction
There are three ways to control the projector:
• the buttons and menus available on the control panel;
• the buttons on the remote control
(in conjunction with the menus on the control panel LCD screen);
• a reduced set of menus on a remote computer using a web browser
(with the IP address of the projector typed into the browser address field).
None of the menus are ever displayed on the projection screen.
Using the control panel
Notes
For information about how to
connect the projector, see
Connecting the projector in
section 2. Installation, and
Connections in section
6. Appendix.
For more information about how
to use the menus, see Using
the menus, later in this section.
For a full listing of all the
menus, see Menu trees, later in
this section.
When using any menu that
requires text or numeric input,
you will need to use the remote
control.
LCD Screen
Lens
adjustment
buttonsMenu
selection
buttonsPower button:
On/ Standby
Power indicator:
green = power on
green flashing = shutter closed
orange = standby
orange flashing = cooling fans runningStatus indicator:
off = normal
green flashing = error
(see error code on LCD screen) Backlight switch
for LCD screen 
						

							page 4.3
iS15-2K Cinema Projector: User Manual 4. Controlling the projector
Notes
For more information about how
to use the menus, see Using
the menus, later in this section.
For a full listing of all the
menus, see Menu trees, later in
this section.
When using any feature that
requires further menu selection,
you will need to be within view
of the LCD screen on the
control panel.
Using the remote control
Direct Menu selection:
In the Menu trees on the following
pagees, some menus are marked with
a number. To jump directly to those
menus using the remote control:
1 Press the 
HELP Direct Menu
selection button.
2 Use the Alpha-numeric keys
to enter the menu number,
including any leading zeroes,
eg 005.
3 Press Enter.
Power:ON = On
OFF = Standby
Alpha-numeric
keys
for text and
numbers. Test
opens
Test Pattern
menu
KEYST (R), AMP (G), ELIST (B)
RGB Mute
Press with CTL
to turn off Red, Green or
Blue component of Test
Pattern. Press again to
turn back on.
Menu
selection buttons
Lens Shift
Press CTL and 
POSI LENS together, release,
then use  
    buttons to position the
image on the screen.
Focus and Zoom
Press with CTL to adjust
focus and zoom.
HELP
Direct Menu
Selection
(see Menu
trees, later in
this section)
AUTO
Lens Memory
Press with CTL to
store lens position.
Remote
control
ON/OFF
PICT/SHUT
Picture mute
Press to turn picture off.
Press again to turn back on.
Shutter
Press with CTL to operate
shutter.
CTL
POSI
LENS
Using the alpha-numeric keys
example:
• For 1 press the key marked 1
ABC once.
• For A press the key marked 1
ABC twice.
• For a, hold the CTL key and press the key marked 1
ABC twice.
• For 5 press the key marked 5
MNO once.
• For n, hold the CTL key and press the key marked 5
MNO twice.
etc 
						

							page 4.4
4. Controlling the projectoriS15-2K Cinema Projector: User Manual
Using the menus
The menus can be accessed from either the control panel or the remote control,
using the menu selection buttons.
At switch on
The projector will initially be in Standby mode. The ON/STANDBY indicator on the
control panel will show orange, and the LCD screen will show Standby:
• To switch the projector ON from Standby mode, press the POWER button on
the control panel or the POWER ON button on the remote control for two
seconds.
After about 30 seconds, the ON/STANDBY indicator on the control panel will
change to green, and the display will show the lamp settings as follows:
Notes
None of the menus are ever
displayed on the projection
screen.
For a full listing of all the
menus, see Menu trees, later in
this section.
When using any menu that
requires text or numeric input,
you will need to use the remote
control.
When using any feature that
requires further menu selection,
you will need to be within view
of the LCD screen on the
control panel.
Power on screen
Lamp settings
Source selected
Title selected Control panel buttons
Remote Control buttons 
						

							page 4.5
iS15-2K Cinema Projector: User Manual 4. Controlling the projector
Navigation through the menu trees
• At any time, to see the first item of the Main menu , press the  MENU button.
• To navigate through the Menus and Sub-menus, use the SELECT 
   
ENTER, CANCEL and UNDO buttons, as shown below.
A full listing of all the menus available is given in Menu trees, later in this
section.
Typical menu screen
Press the SELECT 
button or CANCEL
button to close the
Information menu and
return to the previous
menu.
There are more selections
available in the Information
menu. Press the SELECT
 or  buttons to show the
other selections.
Press the SELECT  button
or ENTER button to choose
Lamp Time.
Typical data entry screen
Use the alphanumeric keys
to enter new data. (see
Using the remote control,
earlier in this section)
Press the UNDO button to
return the setting to its
previous value.
Press the SELECT 
button or CANCEL
button to close the
Projector IP Address
display and return to the
IP Address menu.
Typical selection screen
Press the SELECT 
button or CANCEL
button to close the
Source Select menu
and return to the
previous menu.
There are more selections
available in the Source
Select  menu. Press the
SELECT 
 or  buttons to
show the other selections.
Press the SELECT 
 button
or ENTER button to choose
Title 02.
(*) indicates that this is the
currently selected Source. 
						

							page 4.6
4. Controlling the projectoriS15-2K Cinema Projector: User Manual
Example: Using the Information menus
• Press the  MENU button on the control panel or on the remote control. The first
item of the Main menu opens:
• Press the SELECT 
 or  buttons to show the sub-menus available:
• Press the SELECT 
 button or the ENTER button, to open one of the menus
for example, the Information menu:
• Press the SELECT 
 button or CANCEL button to close the menu
OR press the SELECT 
 or  buttons to show the sub-menus available:
• Press the SELECT 
 button or the ENTER button, to open one of the menus
for example, the Version menu:
Notes
To return to the Main Menu at
any time, press the MENU
button.
For a full listing of all the
menus, see Menu trees, later in
this section. 
						

							page 4.7
iS15-2K Cinema Projector: User Manual 4. Controlling the projector
• Press the SELECT  button or CANCEL button to close the menu
OR press the SELECT 
 or  buttons to show the sub-menus available:
• Press the SELECT 
 button or the ENTER button, to open one of the menus
for example, the Firmware menu:
• This is the end of this menu branch.
Press the SELECT 
 button or the CANCEL button to close the menu and work
your way back up the menu tree.
OR press the MENU button to return to the Main Menu.
Example: Lens Calibration
• From the Main menu, select the Configuration menu.
• From the Configuration menu, select the Installation menu.
• From the Installation menu, select the Lens Calibrate menu.
• From the Lens Calibrate menu, select Zoom or Fixed.
• Press the SELECT 
 button or the CANCEL button to close the menu
OR press the ENTER button to start, then again to confirm.
• If Zoom was selected, the projector will calibrate the lens, and initialise the lens
memory. If Fixed was selected, then the zoom buttons will be disabled.
• Press the SELECT 
 button or the CANCEL button to close the Lens Calibrate
menu and work your way back up the menu tree.
OR press the MENU button to return to the Main Menu.
Notes
To return to the Main Menu at
any time, press the MENU
button.
For a full listing of all the
menus, see Menu trees, later in
this section.
Lens memory will be initialized
when Lens calibrate is
executed. 
						

							page 4.8
4. Controlling the projectoriS15-2K Cinema Projector: User Manual
Notes
To see the first item of the Main
menu , press the  MENU
button.
To navigate through the Menus
and Sub-menus, use the
SELECT 
    ENTER,
CANCEL and UNDO buttons,
as shown in Using the menus,
earlier in this section.
Some menus are marked with a
number. To jump directly to
those menus using the remote
control:
1 Press the HELP Direct Menu
selection button.
2 Use the Alpha-numeric keys
to enter the menu number,
including any leading zeroes,
eg 005.
3 Press Enter.
The Source
Select menus
allow you to
select from:
• up to 100 pre-
defined titles
• a range of test
patterns.see page 9The Configuration
menus allow you
to carry out basic
projector settings,
such as:
• lamp setup
• shutter mode
• MMS control
• panel key lock
• GPIO control
• date, time and
ON/OFF timer
• reset to factory
defaults
• image
orientation
• lens calibration
and centering
• MCGD file
creation
• test pattern
setup
• turret control
• connection
baud rate see pages 10 & 11The Information
menus allow you
to access to:
• lamp time
• BIOS, firmware
and data
versions
• error codes
• IP addresses
for controlling
the projector via
a network
• MMS settingssee page 14The Title Setup
menus allow you
to carry out setup
for up to 100
titles:
• edit titles
• make new titles
• delete titles
• create PCF and
source files
and for each title,
specify:
• signal port
• signal
configuration
• PCF, MCGD
and screen file
selection see pages 12 & 13
Menu trees
The menus can be accessed from either the control panel or the remote control,
using the menu selection buttons.
The Main Menu has four major sub-menus: